Hi, We just recently switched from older hp surestore DLT 3000 library to one of the newer SureStore 1/20's with a Ultrium drive. I had amanda working under the old setup just fine, on this new setup I can't seem to get everthing up and running. I can run the test chg-zd-mtx from the tpchanger and get no errors, plus I can load & unload tapes using mtx but the moment I try to run amtape DailySet1 command it just hangs. Any ideas from anyone? (I've checked permissions & ran everything as root just to be sure, so it's not a permission issue).
Thanks for any help. ##### cut from amanda.conf tpchanger "chg-zd-mtx" changerfile "/etc/amanda/config/changer" tapedev "/dev/nst0" changerdev "/dev/sg16" tapetype Ultrium # what kind of tape it is (see tapetypes below) labelstr "^.*$" # label constraint regex: all tapes must match # Actually tape label string is AA1234L1, AA1235L1, etc... ##### Cut from changerfirstslot=1 lastslot=19 cleanslot=20 autoclean=0 autocleancount=999 havereader=1 offlinestatus=0 offline_before_unload=0 ##### Ultrium tape from amanda.conf define tapetype Ultrium { comment "just produced by tapetype program" length 103998 mbytes filemark 533 kbytes speed 1912 kps }