Hello,
I would like to rotate between multiple sets of 8 tapes because my changer
supports maximum 8 tapes. So I have defined the following in my
amanda.conf:
dumpcycle 5 days
runspercycle 5
tapecycle 8
runtapes 2
When one set of 8 tapes is finished I will take it offsite and then start
up with
On Friday 29 November 2002 09:16, [EMAIL PROTECTED] wrote:
I would like to rotate between multiple sets of 8 tapes because my changer
supports maximum 8 tapes. So I have defined the following in my
amanda.conf:
dumpcycle 5 days
runspercycle 5
tapecycle 8
runtapes 2
When one set of 8
On Friday 29 November 2002 04:16, [EMAIL PROTECTED] wrote:
Hello,
I would like to rotate between multiple sets of 8 tapes because my
changer supports maximum 8 tapes. So I have defined the following
in my amanda.conf:
dumpcycle 5 days
runspercycle 5
tapecycle 8
runtapes 2
When one set of 8
]
gene_heskett@i cc:
olinc.netSubject: Re: Tape labelling and strategy
On Friday 29 November 2002 07:22, [EMAIL PROTECTED] wrote:
First, thanks for your detailed opinion. You are right I could use
40 tapes in the config but then I would like to have at least a
dump level 0 once per week, so how would I acheive that, I mean
which config options in my amanda.conf to
On Fri, Nov 29, 2002 at 10:55:47AM +, Niall O Broin wrote:
On Friday 29 November 2002 09:16, [EMAIL PROTECTED] wrote:
dumpcycle 7 days
runspercycle 5
tapecycle 40 (or however many tapes you have)
runtapes 2
and then you simply label your tapes (physically and with amlabel) mysite01
On Mon, Jun 03, 2002 at 12:43:17PM +0700, Brad Waugh wrote:
On Mon, Jun 03, 2002 at 08:14:10AM +0700, Brad Waugh wrote:
Have trouble with trying to label tapes. The drive on ide0. Have tried
[ lots of data snipped ]
End of included message
With Linux, I'm out of my realm.
Quite
On Mon, Jun 03, 2002 at 12:43:17PM +0700, Brad Waugh wrote:
On Mon, Jun 03, 2002 at 08:14:10AM +0700, Brad Waugh wrote:
Have trouble with trying to label tapes. The drive on ide0. Have
tried
[ lots of data snipped ]
End of included message
With Linux, I'm out of my realm.
Have trouble with trying to label tapes. The drive on ide0. Have tried
/dev/ht0 /dev/nht0. Both give;
$ /usr/sbin/amlabel iogta Tape1
rewinding, reading label, not an amanda tape
rewinding, writing label Tape1, checking label
amlabel: no label found, are you sure /dev/nht0 is non-rewinding?
On Mon, 3 Jun 2002, Brad Waugh wrote:
Have trouble with trying to label tapes. The drive on ide0. Have tried
/dev/ht0 /dev/nht0. Both give;
$ /usr/sbin/amlabel iogta Tape1
rewinding, reading label, not an amanda tape
rewinding, writing label Tape1, checking label
amlabel: no label
On Mon, Jun 03, 2002 at 08:14:10AM +0700, Brad Waugh wrote:
Have trouble with trying to label tapes. The drive on ide0. Have tried
/dev/ht0 /dev/nht0. Both give;
$ /usr/sbin/amlabel iogta Tape1
rewinding, reading label, not an amanda tape
rewinding, writing label Tape1, checking label
On Mon, Jun 03, 2002 at 08:14:10AM +0700, Brad Waugh wrote:
Have trouble with trying to label tapes. The drive on ide0. Have tried
/dev/ht0 /dev/nht0. Both give;
$ /usr/sbin/amlabel iogta Tape1
rewinding, reading label, not an amanda tape
rewinding, writing label Tape1, checking
Hi everyone
Recently I changed the lablestring in the amanda configuration file. I
changed to format completely different from the old one. How do I relable
the tapes which were labeled with the earlier configuration. When I try to
lable the tapes with the new configuration it says
the tape is
13 matches
Mail list logo
