--with-testing was needed with amanda 2.4.* if a client could be
accessed by 2 different config at the same time.
--with-testing is not needed with amanda-2.5.*, the amandad deamon allow
multiple request simultaneously.
Jean-Louis
Jean-Francois Malouin wrote:
I'll just add that you must als
Thanks for all the responses, pretty much confirming what I thought. I
haven't done anything special with the ports yet though, & both configs
seem to run together just fine, but I haven't got multiple clients
involved in this config, I'm just testing out the concepts. I need to
look at port rang
* Joshua Baker-LePain <[EMAIL PROTECTED]> [20070626 13:49]:
> On Tue, 26 Jun 2007 at 12:57pm, Jean-Francois Malouin wrote
>
> >I'll just add that you must also configure amanda such that both
> >configs use different ports with '--with-testing=config1' and
> >'--with-testing=config2' and add those
On Tue, 26 Jun 2007 at 12:57pm, Jean-Francois Malouin wrote
I'll just add that you must also configure amanda such that both
configs use different ports with '--with-testing=config1' and
'--with-testing=config2' and add those to /etc/services like
amanda-config110080/tcp
amanda-config11
* Joshua Baker-LePain <[EMAIL PROTECTED]> [20070626 12:32]:
> On Tue, 26 Jun 2007 at 4:58pm, Weber, Philip wrote
>
> >Is it possible to have 2 configs using 2 separate drives in a tape
> >robot, i.e. can they share the changer interface? I don't mean use of
> >RAIT.
> >
> >I have successfully set
On Tuesday 26 June 2007 11:58:00 Weber, Philip wrote:
> Is it possible to have 2 configs using 2 separate drives in a tape
> robot, i.e. can they share the changer interface? I don't mean use of
> RAIT.
The answer to your question is yes, but you must ensure that only one instance
of mtx is runn
On Tue, 26 Jun 2007 at 4:58pm, Weber, Philip wrote
Is it possible to have 2 configs using 2 separate drives in a tape
robot, i.e. can they share the changer interface? I don't mean use of
RAIT.
I have successfully set up 1 config with chg-zd-mtx & then tried
duplicating that to a 2nd config us
Hi,
Is it possible to have 2 configs using 2 separate drives in a tape
robot, i.e. can they share the changer interface? I don't mean use of
RAIT.
I have successfully set up 1 config with chg-zd-mtx & then tried
duplicating that to a 2nd config using chg-zd-mtx with a different set
of tapes in t