Greetings:
My system is ALL 3.3.0 (brand new) and has been working for the past few weeks.
I keep adding additional clients, etc, but am now pretty well ready to go live.
Yesterday, I ran another test backup, but received errors indicating the tape
drive wasn't ready (strange enough), but
Neil,
I'd had a variety of tape errors, one of the linux boxes will
occasionally drop the driver for the robot on the floor. My
most recent problem was timeouts to the LTO5 in my G2 juke
attached to a Solaris x86 box.
The answers very and you have to run the checklist, the linux box,
you unload
neil,
Can you post the changer state file.
Run the following command and post the result:
amtape CONFIG inventory
amtape CONFIG update
Try a new amflush or amdump.
Jean-Louis
On 01/19/2012 11:24 AM, Neil Carter wrote:
Greetings:
My system is ALL 3.3.0 (brand new) and has been working for
Greetings:
Attached are the changer.conf file, the results of the two commands you
requested, and the eMailed result from another attempted amflush.
Thanks!
Neil
On 2012.01.19 10:51 AM, Jean-Louis Martineau wrote:
neil,
Can you post the changer state file.
Run the following command and
Greetings:
GOT IT!!
I found the following in the taper.20120119111247.debug file:
Thu Jan 19 11:12:48 2012: taper: SL24: polling 'tape:/dev/nst0' to see if it's
ready
*_Thu Jan 19 11:12:50 2012: taper: Empty amanda header: buflen=32768 lsize=32768
buf=''
Thu Jan 19 11:12:50 2012: taper:
Hi all,
last day's dump of Amanda (version 2.5.1b1) failed and files were
left over in the holding disk. So I tried to do an amflush which
also fails, nearly immediately. Below is some more info:
logfile amflush.1:
amflush: start at Thu Aug 24 13:02:54 CEST 2006
amflush: datestamp
On Thu, Aug 24, 2006 at 01:17:14PM +0200, Charles Stroom wrote:
Hi all,
last day's dump of Amanda (version 2.5.1b1) failed and files were
left over in the holding disk. So I tried to do an amflush which
also fails, nearly immediately. Below is some more info:
logfile amflush.1:
Charles,
It's a bug 2.5.1b1.
Upgrade to 2.5.1b2, latest cvs or latest snapshot
from http://www.iro.umontreal.ca/~martinea/amanda
We are close of a stable 2.5.1 release.
Jean-Louis
Charles Stroom wrote:
Hi all,
last day's dump of Amanda (version 2.5.1b1) failed and files were
left over in
On Thursday 24 August 2006 10:29, Jean-Louis Martineau wrote:
Charles,
It's a bug 2.5.1b1.
Upgrade to 2.5.1b2, latest cvs or latest snapshot
from http://www.iro.umontreal.ca/~martinea/amanda
We are close of a stable 2.5.1 release.
Jean-Louis
Jean-Louis: Is it safe to try last nights snapshot?
Thanks.
As I have a Suse specific RPM installation, I might prefer to wait
until 2.5.1 is made available in RPM.
To John LaBadie: yes, there were dumps!
ls /work-2/amanda/dumps/20060824110501
. corrente.localnet._usr.0
..
On Thu, Aug 24, 2006 at 06:16:03PM +0200, Charles Stroom wrote:
Thanks.
As I have a Suse specific RPM installation, I might prefer to wait
until 2.5.1 is made available in RPM.
To John LaBadie: yes, there were dumps!
My question was moot once JLM noted it was a know and fixed defect.
11 matches
Mail list logo