Am 17.12.2014 um 15:12 schrieb Jean-Louis Martineau:
> On 12/17/2014 01:15 AM, Stefan G. Weichinger wrote:
>> So the parallel taping is initiated only when there is more data than
>> that?
>
> yes, amanda always try to fill tapes.
>
> You can lie to amanda and set the tape length to a smaller val
On 12/17/2014 01:15 AM, Stefan G. Weichinger wrote:
Am 16.12.2014 um 20:43 schrieb Jean-Louis Martineau:
What's the flush* value?
Did it have enough data to fill more than one tape?
Very likely not.
The holding disk is ~200G which is around one tape.
So the parallel taping is initiated only w
Am 16.12.2014 um 20:43 schrieb Jean-Louis Martineau:
> What's the flush* value?
> Did it have enough data to fill more than one tape?
Very likely not.
The holding disk is ~200G which is around one tape.
So the parallel taping is initiated only when there is more data than that?
Thanks!
Stefan
What's the flush* value?
Did it have enough data to fill more than one tape?
On 12/16/2014 02:05 PM, Stefan G. Weichinger wrote:
Another config-question I have:
I have a server with 2 LTO-2 drives, configured as:
--
tapetype LTO2-200
tpchanger "chg-multi:{/dev/nst0,/dev/nst1}"
changerfile "
Another config-question I have:
I have a server with 2 LTO-2 drives, configured as:
--
tapetype LTO2-200
tpchanger "chg-multi:{/dev/nst0,/dev/nst1}"
changerfile "chg-multi-state"
taper-parallel-write 2
runtapes 2
--
according to
http://wiki.zmanda.com/index.php/How_To:Write_to_Multiple_V