From: Anthony Koo <anthony....@amd.com>
[Why]
Seamless boot code not working on all ASICs because of
some underflow issues caused by some uninitialized HW
state.
[How]
Keep some logical and power gating init code in hw_init.
Move some per pipe init code to enable accelerated mode
Signed-off-by: Anthony Koo <anthony....@amd.com>
Reviewed-by: Aric Cyr <aric....@amd.com>
Acked-by: Leo Li <sunpeng...@amd.com>
---
.../amd/display/dc/dce110/dce110_hw_sequencer.c | 3 ++
.../drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 35 +++++++++++++++-------
2 files changed, 27 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 5c7fb92..21a6218 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1551,6 +1551,9 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct
dc_state *context)
}
}
+ if (dc->hwss.init_pipes)
+ dc->hwss.init_pipes(dc, context);
+
if (edp_link) {
/* this seems to cause blank screens on DCE8 */
if ((dc->ctx->dce_version == DCE_VERSION_8_0) ||
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index d1a8f1c..15c1a94 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -889,22 +889,23 @@ void hwss1_plane_atomic_disconnect(struct dc *dc, struct
pipe_ctx *pipe_ctx)
dcn10_verify_allow_pstate_change_high(dc);
}
-static void plane_atomic_power_down(struct dc *dc, struct pipe_ctx *pipe_ctx)
+static void plane_atomic_power_down(struct dc *dc,
+ struct dpp *dpp,
+ struct hubp *hubp)
{
struct dce_hwseq *hws = dc->hwseq;
- struct dpp *dpp = pipe_ctx->plane_res.dpp;
DC_LOGGER_INIT(dc->ctx->logger);
if (REG(DC_IP_REQUEST_CNTL)) {
REG_SET(DC_IP_REQUEST_CNTL, 0,
IP_REQUEST_EN, 1);
dpp_pg_control(hws, dpp->inst, false);
- hubp_pg_control(hws, pipe_ctx->plane_res.hubp->inst, false);
+ hubp_pg_control(hws, hubp->inst, false);
dpp->funcs->dpp_reset(dpp);
REG_SET(DC_IP_REQUEST_CNTL, 0,
IP_REQUEST_EN, 0);
DC_LOG_DEBUG(
- "Power gated front end %d\n",
pipe_ctx->pipe_idx);
+ "Power gated front end %d\n", hubp->inst);
}
}
@@ -931,7 +932,9 @@ static void plane_atomic_disable(struct dc *dc, struct
pipe_ctx *pipe_ctx)
hubp->power_gated = true;
dc->optimized_required = false; /* We're powering off, no need to
optimize */
- plane_atomic_power_down(dc, pipe_ctx);
+ plane_atomic_power_down(dc,
+ pipe_ctx->plane_res.dpp,
+ pipe_ctx->plane_res.hubp);
pipe_ctx->stream = NULL;
memset(&pipe_ctx->stream_res, 0, sizeof(pipe_ctx->stream_res));
@@ -1001,9 +1004,6 @@ static void dcn10_init_pipes(struct dc *dc, struct
dc_state *context)
struct dpp *dpp = dc->res_pool->dpps[i];
struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
- // W/A for issue with dc_post_update_surfaces_to_stream
- hubp->power_gated = true;
-
/* There is assumption that pipe_ctx is not mapping irregularly
* to non-preferred front end. If pipe_ctx->stream is not NULL,
* we will use the pipe, so don't disable
@@ -1108,6 +1108,22 @@ static void dcn10_init_hw(struct dc *dc)
link->link_status.link_active = true;
}
+ /* If taking control over from VBIOS, we may want to optimize our first
+ * mode set, so we need to skip powering down pipes until we know which
+ * pipes we want to use.
+ * Otherwise, if taking control is not possible, we need to power
+ * everything down.
+ */
+ if (dcb->funcs->is_accelerated_mode(dcb)) {
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct hubp *hubp = dc->res_pool->hubps[i];
+ struct dpp *dpp = dc->res_pool->dpps[i];
+
+ dc->res_pool->opps[i]->mpc_tree_params.opp_id =
dc->res_pool->opps[i]->inst;
+ plane_atomic_power_down(dc, dpp, hubp);
+ }
+ }
+
for (i = 0; i < dc->res_pool->audio_count; i++) {
struct audio *audio = dc->res_pool->audios[i];
@@ -1137,9 +1153,6 @@ static void dcn10_init_hw(struct dc *dc)
enable_power_gating_plane(dc->hwseq, true);
memset(&dc->res_pool->clk_mgr->clks, 0,
sizeof(dc->res_pool->clk_mgr->clks));
-
- if (dc->hwss.init_pipes)
- dc->hwss.init_pipes(dc, dc->current_state);
}
static void reset_hw_ctx_wrap(
--
2.7.4
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
