On 24 Dec 2009 at 14:52, John Papay wrote:
Date sent: Thu, 24 Dec 2009 14:52:48 -0500
From: John Papay j...@papays.com
Subject:[amsat-bb] HO-68 Audio 24December2009 1807z FM/BBS
To: amsat-bb@amsat.org
An audio recording of the
I was able to copy the HO-68 Beacon from my QTH in FM19fa using my new Arrow II
Handheld Satellite Antenna. I wanted to thank the Chinese AMSAT Folks for a
wonderful gift to the amateur satellite community and wish everyone a very
merry Christmas tonight. I look forward to many QSO's on this
Luc, John and the Group,
I want to wish everyone a Healthy and Peaceful New Year, and I hope that
Santa was good to you; I know Santa gave me a terrific Satellite gift.
I asked Alan to give me a better understanding of how signals are processed
with XO-68, I hope his explanation below helps.
Hello
Herewith an amended schedule for SO-67 with South America, USSR and
Australia/NZ included. Note that I had to adapt the previous schedule in
three instances to accommodate the added countries (see below).
SOUTH AMERICA:
26/12 01:38
26/12 10:36
26/12 12:09
26/12 23:45
27/12 01:18
27/12
Hi Alan,
Well I can report like many others, the SSB operation is excellent and
clear comms.
My switch on was at 5 degs going North to LOS and I worked ZS6Y, ST2NH,
ZS1LS ZS6BNE.
I was still copying at zero degs the stations in the North !
Congrats also for this fantastic SSB xponder.
Hello and Merry Christmas,
I have an ARR SP432VDG preamp, which is mast-mounted to an Elk antenna in my
attic. This set-up has worked well until today, when I did not hear any sats
with 70cm downlink.
I then tried to see if I could bring up the local 70cm repeaters.
Interestingly, I could key
Hi Bill,
Merry Christmas!
I'm sorry to hear about your ARR preamp problem---I have used these over the
years, and unfortunately what you describe is very consistent with the GAsFET
device going bad. The 1 second of signal that you hear is from the relays
working with the RF sense circuit.
I have a Landwehr 145ma and have lost the power plug. I am looking for the
# of the DIN plug for the 145ma
Tnx
Jim
K7UDG
hartw...@hartwell.net
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member?
Hello all,
When HO-68 was at AOS this evening here in Europe I decoded a telemetry
line at 19u18 utc before making contacts on the transponder.
PA Output RF Switch Status: PA1 Works (Transponder and Beacon)
Transponder Working Status: Beacon and Linear Transponder
Transponder
Sorry slight typo on my callsign
http://www.kl7uw.com/LBant.htm
73, Ed
At 05:15 PM 12/25/2009, you wrote:
Ed, no soap with that website, as shows none exist. You sure on the
website name?
John W6ZKH
- Original Message -
From: Edward Cole kl...@acsalaska.net
To: amsat-bb@amsat.org
10 matches
Mail list logo
