I didn't see this come through the -bb yet, so you might get it twice.
73, Drew KO4MA
-Forwarded Message-
From: Johann Lochner loch...@sun.ac.za
Sent: Jun 19, 2011 4:36 PM
To: amsat-bb@amsat.org
Cc: Hans van de Groenendaal h...@intekom.co.za, Andrew Glasbrenner
It's coming soon!
*ORIGINAL 13 COLONIES
INDEPENDENCE WEEK
SPECIAL EVENT
July 1st-5th 2011*
http://www.13colonies.info/
We will be on the satellites again this year!
MA- KB1PVH/K2H, Dave
VA- NL7VX/K2B, Steve
PA- KE3LB/K2M, John
SC- K4YYL/K2L, Art
GA- N3TL/K2G, Tim
NC- W4MPS/K2J, Marc
NY-
Technical papers are solicited for presentation at the 30th Annual ARRL
and TAPR Digital Communications Conference to be held September 16-18,
2011 in Baltimore, Maryland. These papers will also be published in the
Conference Proceedings (you do NOT need to attend the conference to have
your paper
Sorry for the off topic question, but I need some APRS help...
If you go to http://aprs.fi/?call=a%2FKD8KSN-9 and view my path over the past
three+ hours, you will see I made a trip down to Frazysburg and back home. I
went down, came back, shut the beacon off, and it was about 10:40a this
Resending with corrected verbiage and typos
From: Zachary Beougher
Sent: Monday, June 20, 2011 12:49 PM
To: amsat-bb@amsat.org
Subject: Off Topic APRS Question
Sorry for the off topic question, but I need some APRS help...
If you go to http://aprs.fi/?call=a%2FKD8KSN-9 and view my path over
Jack WA1ZDV
- Forwarded Message -
From: Jack Barbera barberaalderw...@yahoo.com
To: amsat-bb-requ...@amsat.org amsat-bb-requ...@amsat.org
Sent: Sunday, June 19, 2011 2:58 PM
Subject: O\OREOS Help
Need a little help.Trying to add O\OREOS to my Doppler.SQF file in note pad.
Have
d. Entering Satellite Frequency Data
Satellite frequency data is used by SatPC32 to tune your radio. This
information is stored in the Doppler.SQF file
located in the SatPC32 program directory. This is a text file and you should
follow the same procedures to modify it as
you would use for any
Need a little help.Trying to add O\OREOS to my Doppler.SQF file in note pad.
Have entered
O\OREOS,437.3050,AX.25,NOR,0,0;1200 Baud
This does not work for me.What did I do incorrectly?Can anyone help?
Thanks
Jack WA1ZDV
___
Try:
The satellite name in your Doppler.SQF file must EXACTLY match the name in your
keps file, unless you have an entry in the AmsatNames.txt file to translate
from
the ID or International Designator number to the name you are using.
That being said, in the NASA 2-line keps available from
Jack,
O\OREOS,437.3050,AX.25,NOR,0,0;1200 Baud
It normally appears in the Keps as OOREOS. They must match exactly for
SATPC32 to match the two, unless you use the AMSATNAMES.TXT file. Also,
AX.25 is the way it sends data, not the mode your radio should be tuned for,
FM. Finally, the data is
In the current UPLINK 145.880 - DOWNLINK 435.150 config, is the tone of 67.0 on
the TX required?
Clint Bradford
clintbradf...@mac.com
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to
I'd like to thanks everyone for your help.Got it to boot up so all I have to do
is wait for a pass of OOREOS to see if everything works.
The entry I used is:
OOREOS,437305,0,FM,,,0,01200,Baud
Jack WA1ZDV
___
Sent via AMSAT-BB@amsat.org. Opinions
No tone required.
73,
Mark N8MH
On Mon, Jun 20, 2011 at 3:53 PM, Clint Bradford clintbradf...@mac.com wrote:
In the current UPLINK 145.880 - DOWNLINK 435.150 config, is the tone of 67.0
on the TX required?
Clint Bradford
clintbradf...@mac.com
On 6/20/2011 3:53 PM, Clint Bradford wrote:
In the current UPLINK 145.880 - DOWNLINK 435.150 config, is the tone of 67.0
on the TX required?
No.
73, Drew KO4MA
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an
My equipment is an FT-847 feeding a pair of 8 element RHCP antennas with
Advanced Research Preamps mounted at the antenna. I use SatPC for the
automatic
tracking. I am supposedly transmitting a 67 Hz PL on TX.
Ar elevations above 40 degrees, I can hear AO50 full quieting with just a
little
It sounds like you are not transmitting the tone...
You should have two entries for SO-50 in the SubTone.SQF file:
SO-50,67.0,$3F,1
SO-50,74.4,$3E,3
When you click the T0 in the upper left part of the SatPC32 screen, it will
change to T1, indicating that you have selected the first tone (67.0)
On Mon, Jun 20, 2011 at 5:24 PM, Douglas Phelps dphel...@ameritech.net wrote:
My equipment is an FT-847 feeding a pair of 8 element RHCP antennas with
Advanced Research Preamps mounted at the antenna. I use SatPC for the
automatic
tracking. I am supposedly transmitting a 67 Hz PL on TX.
Sat PC only tracking antennas. The CAT interface on my FT-847 is not working.
Mt Rig says the tone is on.
From: George Henry ka3...@att.net
To: Douglas Phelps dphel...@ameritech.net; amsat-bb@amsat.org
Sent: Mon, June 20, 2011 4:56:34 PM
Subject: Re:
I see no time devoted to it in the astronauts' schedules this week.
Clint Bradford
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription
I figured it out with the help of a service monitor. It turns out that while
you can set the frequency of the sub band by pushing the sub button, you can
not
turn on the Tone Encode that way. You have to move the TX to the main dial,
turn on the Tone, and then move it back. Therefore, I was
According to www.issfanclub.com, the ISS repeater has not been active for
almost 2 years now. At one point it was rumored that the memory programming
of the radio had been messed up, and the crew did not know how to put it
into crossband repeat mode manually. Don't know whether that's true or
21 matches
Mail list logo