On Thu, Apr 16, 2020 at 3:14 PM Derek Atkins wrote:
>
>
> On Thu, April 16, 2020 10:01 am, Peter Robinson wrote:
> >>
> >> So where is this Rev B1 coming from? Why does it not know it's a Rev D1
> >> board? This is clearly causing it to pull in the wro
?
> >
> > NB: these two links are:
> > https://github.com/TechNexion/linux/blob/tn-imx_4.1.15_2.0.0_ga/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
> > https://github.com/wandboard-org/linux/blob/wandboard_imx_4.1.15_1.1.0_ga/arch/arm/boot/dts/imx6qdl-wandboard-revd1.
s wrong), but quite frankly, I don't
> know where to start looking. One clue, though, I installed and ran
> "monitor-edid", and it said:
>
> [toralf@lille-hjelper ~]$ sudo monitor-edid
> [toralf@lille-hjelper ~]$
>
> Yep, that's right. Absolutely nothing. In e
Hi,
> I tried fdisk -l Fedora-Server-dvd-aarch64-28-1.1.iso
> It failed to list partition table information.
>
> but if change to x86 iso, like Fedora-Server-dvd-x86_64-28-1.1.iso.
> It can list partition information like below:
>
> Device Boot Start End Sectors
> > This is the (relevant) output from /proc/cpuinfo:
> > Hardware : BCM2835
> > Revision : c03111
> > Serial : 100094b1358a
> > Model : Raspberry Pi 4 Model B Rev 1.1
>
> this should work with Linux 5.6. So i don't have an idea what's the
> problem here.
>
> Rev 1.2 needs recent changes to
> Fedora 32 aarch64 with XFCE runs smoothly on my Raspi4. Everything is
> working fine except sound. I can't hear anything with my headphone
> plugged in .
It's not supported upstream, the analog port on the RPi3 isn't
supported in the upstream kernel yet either, but if you also look
close enough
> I haven't retried it yet, but I do have some extra info on my previous (and
> failed) attempt:
>
> I used arm-image-installer as the tool. As it does not yet have a rpi4
> target, I used the rpi3 value. It does boot, but, like I said, it hangs in a
> later stage. I will provide screenshots
> I have a Raspberry Pi 3B running Fedora AAarch connected to my TV.
>
> After installed the latest version 31 updates, the display went weird on
> me. Monitor preferences list an "unknown" monitor with resolution
> 1824x984 and refresh rate 77 Hz, and colours are all wrong. What should
> be red
> Thanks Paul. I just tried
> Fedora-Workstation-32-20200225.n.0.aarch64.raw.xz on my RPi4 but it
> behaves the same as I previously reported. There is a 5 minute pause
> after the eth0 link becomes ready and I then wind up in the dracut
> emergency shell.
> >>>
>
> >> Thanks Paul. I just tried
> >> Fedora-Workstation-32-20200225.n.0.aarch64.raw.xz on my RPi4 but it
> >> behaves the same as I previously reported. There is a 5 minute pause
> >> after the eth0 link becomes ready and I then wind up in the dracut
> >> emergency shell.
> >
> > That's two
> >> I just tried Fedora-Minimal-Rawhide-20200302.n.1.aarch64.raw.xz and it
> >> worked
> >> properly. However, Fedora-Workstation-Rawhide-20200302.n.1.aarch64.raw.xz
> >> has a problem, as shown by the attached session.log file. I let it run for
> >> a long period of time, and after 5 or 10
On Tue, Mar 3, 2020 at 5:56 PM Steven A. Falco wrote:
>
> On 3/3/20 9:38 AM, Paul Kennedy wrote:
> > I've just tried the latest F32 and Rawhide workstation images, but neither
> > successfully booted for me. Both hung after eth0 came up, then sat for
> > several minutes before logging about
Hi Nikhil,
Welcome, I don't appear to have got the initial mail (even the resent
one), so not sure if it was sent to the arm mailing list or another
one and Dan added you to the reply but welcome.
On Thu, Feb 20, 2020 at 4:03 PM Nikhil Jha wrote:
>
> (Sorry- resending this email because I
> I have a fair number of Raspberry Pi V3 B/B+ and Raspberry Pi V2 B
> systems running Fedora 31 (and a V4 I would like to get on Fedora -
> still waiting). I have Fedora 31 aarch64 installed on most of the V3
> and armv7l/armhfp on the V2 systems. Running dnf updating today,
> updated to the
> I have installed fedora 31 on my Odroid XU4. However I have noticed a
> problem with the uboot image in uboot-images-armv7 (2019.10). I have
> used the uboot image /usr/share/uboot/odroid-xu3/u-boot.bin and I have
> found it has the fdtfile environment variable set to
> "exynos5422-odroid.dtb".
> > > > I'm working on it. The plan is for initial support in Fedora 32. I'm
> > > > working on getting U-Boot in decent shape so it can be flashed to the
> > > > SPI, plus a usable DT. Most of the userspace stuff is already there.
> > > > We will then evolve it through the release. Hoping to have
> > I'm working on it. The plan is for initial support in Fedora 32. I'm
> > working on getting U-Boot in decent shape so it can be flashed to the
> > SPI, plus a usable DT. Most of the userspace stuff is already there.
> > We will then evolve it through the release. Hoping to have it in a
> >
> Hi Christopher,
>
> Christopher Smith writes:
>
> > Fedora Arm,
> >
> > I am emailing to see if there will be support for the Pinebook Pro or an
> > emmc install script for installing fedora arm on the Pinebook Pro?
> >
>
> I have asked the same a month ago ;-)
>
> It's on the agenda:
>
> > Refreshed the files used for F31 (image name and kernel version). It
> > should now just work but do let us know if I missed anything.
>
> The page looks good, and it appears to be working.
>
> Unfortunately (for me) a compile is slower on qemu on my x86_64 than it
> is on my Wandboard
> > Proposed changes to the Desktop release criteria for ARM and AArch64 in
> > Fedora 32:
> > * drop Xfce on 32-bit ARM from release blocking desktops
> > * add Workstation on AArch64 to release blocking desktops
> >
> Program Management is okay with this proposal, but ideally I'd like to
>
On Wed, Jan 29, 2020 at 4:45 PM Steven A. Falco wrote:
>
> On 1/29/20 7:40 AM, Peter Robinson wrote:
> >> I ran into a problem with multiple definition of yylloc in the dtc tool
> >> when trying to compile the kernel in rawhide via mock, because of a change
> >>
> I ran into a problem with multiple definition of yylloc in the dtc tool when
> trying to compile the kernel in rawhide via mock, because of a change in
> gcc10.
>
> The attached patch allows me to build the dtc tool.
>
> Where is the best place to submit this? It should go into the upstream
On Tue, Jan 28, 2020 at 3:32 PM Steven A. Falco wrote:
>
> On 1/28/20 9:39 AM, Peter Robinson wrote:
> > On Tue, Jan 28, 2020 at 1:59 PM Steven A. Falco
> > wrote:
> >>
> >> I'd like to add an RTC module to a Raspberry Pi. I see that uboot has
> &
On Tue, Jan 28, 2020 at 1:59 PM Steven A. Falco wrote:
>
> I'd like to add an RTC module to a Raspberry Pi. I see that uboot has some
> support for device tree overlays, but if I'm reading the code correctly, it
> doesn't seem to be enabled for the Pi.
>
> Is it possible to use device tree
; ‐‐‐ Original Message ‐‐‐
> On Tuesday, January 28, 2020 10:36 AM, Peter Robinson
> wrote:
>
> > > I have recently received my long awaited Pinebook Pro and wanted to
> >
> > > install Fedora on it.
> > > Unfortunately, I haven't found concrete hints tha
> I have recently received my long awaited Pinebook Pro and wanted to
> install Fedora on it.
>
> Unfortunately, I haven't found concrete hints that the Pinebook Pro is
> supported by the Fedora ARM spin. All I found was the
> arm-image-installer package, but that one appears to support the
>
> I'm running Fedora Rawhide on an RPi 4, and noticed that the video wasn't
> quite filling the monitor. Looking at Xorg.0.log, I saw:
I need more context. What architecture, what image etc, what desktop
environment. Custom builds etc, as we've not yet announced anything
official around RPi4
> This might be a silly question, but how do I select a kernel to boot
> from on the Raspberry Pi?
Use the arrow keys when the menu comes up? I'm not sure from the
details you provide at which point/how you're trying to change this.
> I've just installed Fedora 31 on both a Pi2 and a Pi3 and in
> > Hello guys,
> >
> > just to let you know, Eric Dumazet from netdev mailing list found 2 bugs
> > one related to a memory leak (just been added to mainstream)
> > one related to gso max size (from yesterday night)
> >
> > with both patches I am not able to reproduce the issue !!
>
>
t; On 06.01.20 15:30, RENARD Pierre-Francois wrote:
> >>>> OK,
> >>>> upgrade done, running now kernel 5.4.7-200.fc31, same issue with scp.
> >>> this sounds like a known issue [1]. There is at least a workaround [2].
> >>>
> >>> [1] - https://github.
> The uboot version from package: uboot-images-armv7-2019.10-2.fc31.noarch
> (uboot/odroid-xu3) expects the dtb file for a odroid hc2 to be named:
> exynos5422-odroid.dtb
> but the kernel provides exynos5422-odroidhc1.dtb
There's no upstream kernel hc1 DT. It looks like upstream support for
> why is RPi 4 supported on Ubuntu early than in Fedora? Is there any
> different in kernel in Ubuntu?
Yes, they use random vendor forks.
> Filip Bartmann
>
> On Thu, 9 Jan 2020 13:35:52 -0500
> "Steven A. Falco" wrote:
>
> > On 1/9/20 10:56 AM, Peter Robin
> I know that the RPi 4 is not currently supported in Fedora, while we wait for
> upstream kernel support for the new Broadcom BCM2711 SOC.
>
> However, I now see that there is some support for the BCM2711 in kernel 5.5,
> and I also see that kernel 5.5 is in rawhide.
It's been worked on.
>
lient_loop: send disconnect: Broken pipe
> lost connection
>
>
>
>
> I don't think this is a NFS issue but more generaly an issue with the
> driver of the native ethernet card ??
Quite possibly a combination of driver issues with your particular setup.
We don't do any direct d
> I am running Fedora 31, aarch64 release on many Raspberry PI 3B+.
You don't state which kernel you're running.
> I have exactly the same behaviour with all the RPIs.
Are they all 3B+ devices?
> When trying to access a NFS server ( perfectly working with my laptops
> running fedora X86) with
This meeting is cancelled.
On Sun, Dec 29, 2019 at 3:00 PM wrote:
>
> Dear all,
>
> You are kindly invited to the meeting:
>Fedora ARM & AArch64 status meeting on 2019-12-31 from 15:00:00 to
> 16:00:00 UTC
>At fedora-meetin...@irc.freenode.net
>
> The meeting will be about:
> Fedora ARM
Hi Adam,
We have HAT overlays working but they need some configuration to use
the RPi firmware DTs. Paul has tested this and is in the process of
documenting the process, it still needs a little bit of a cleanup so
we're not perfect yet.
The other thing to note with the sense HAT is that ATM
f
> Bristol TN/VA. :)
I believe this was fixed for the final F-31 release, did you get a
chance to try that out?
Peter
> Thanks again,
>
> Garry Wakely
>
>
> On Fri, Oct 18, 2019 at 5:17 AM Peter Robinson wrote:
>>
>> Please leave the Arm list on the rep
On Sun, 1 Dec 2019, 08:01 Peter Hjalmarsson, wrote:
> Hi,
>
> Just wanted to point out that due to U-Boot not supporting XFS, and Fedora
> Server has moved to a XFS /boot, the current images as
>
FYI
-- Forwarded message -
From: Petr Pisar
Date: Mon, Nov 11, 2019 at 4:16 PM
Subject: pcre2-10.34-RC2 with AArch64 SIMD JIT
To:
I've just pushed pcre2-10.34-RC2 into Fedora 32. Among some boring
featuring like Unicode 12.1.0 and matching in invalid UTF strings, now
the
On Fri, Nov 8, 2019 at 7:19 PM Christopher Odom
wrote:
>
> Hey Paul,
>
> The appliance-tools image I made gets stuck on a black screen
> at startup. I'm using a raspberry pi 3b, and we've been building
> these images inside of mock chroots natively on the rpi.
Do you have a serial console? A
>> I'm not sure of the state of
>> the various peripherals in the upstream kernel so that will impact a
>> bit. I'll know better later in the week once I have a chance to have a
>> better look.
>>
>
> Ok. Thanks a lot for the reply. I don't have serial cable so I can wait until
> you can figure
Hi,
Long story short, it will be possible, and is planned.
> Just wondering if anyone thinks it would be possible to install fedora 31 on
> a Pinebook Pro? (aarch64) I have nothing against debian but I find working in
> a red hat environment easier and more useful with my job. Seems like a
> Hi all,
> I hope I wrote in the right place.
You are.
> I've see that Fedora 31 now supports Rock64 sbc.
It does.
> I've not found any guide to setup a sd card or any how-to boot Fedora 31
> with it.
I still need to update the documentation.
> In addition, Hdmi does not works form me,
entering the login information, the system reboots itself. :/ So close!
>
> Does there happen to be a stable 29 release for the Pi 3b+ ? I could not
> find it in numerous searches today.
>
> Thanks again,
>
> Garry Wakely
>
>
> On Wed, Oct 16, 2019 at 5:48 PM Peter Robinson
Adding back Arm list.
On Wed, Oct 16, 2019 at 8:01 PM Garry Wakely wrote:
>
> Hi Peter - It is the Fedora-SoaS-armhfp-30-1.2-sda version downloaded this
> morning from here: https://arm.fedoraproject.org/
> It was installed according to the directions here:
>
> Hi Folks - I am trying to set up Sugar On A Stick for Raspberry Pi 3+, but am
> running into a boot issue. The boot process runs properly until it gets to
> "Reached Target Basic System", and then it hangs at
> "A start job is running for dev/dis...1fe03C48" at which point there is no
>
> I have the following device: DIY Laptop by Olimex
> https://www.olimex.com/Products/DIY-Laptop/
>
> It is a 2GB A64 Cortex A53 Quad core 64-bit processor based.
> https://www.olimex.com/Products/DIY-Laptop/SPARE-PARTS/TERES-PCB1-A64/open-source-hardware
We support a bunch of the AllWinner based
On Fri, Sep 20, 2019 at 5:41 PM Mark Verlinde wrote:
>
> Hello list,
>
> After "complaining" on the centos-arm list about a Fedora specific patch in
> the el7 uboot-images they encouraged me to try to merge a fix upstream.
>
> Well here we are ;)
>
> It's about the specific location off the
On Thu, 19 Sep 2019, 21:25 moiraine damodred, wrote:
> Good, to know, thanks a lot for your efforts! Just as a side note, a few
> weeks back there's a testing 64-bit kernel announced on raspbian here
>
Well aware of all of that, I work with and follow the RPi crew closely,
it's not an upstream
It's not currently supported. It won't be until likely F-32, there's
issues with DMA on aarch64 and the patch sets for support are basic.
As the person that supports the RPi on Fedora the minimum viable
support that needs to happen for me to enable it is display output,
keyboard (ie USB), network
Hi Dan,
Sorry for the delayed reply here.
> as a fresh owner of the Helios4 NAS (batch 3) I've prepared a rpm with
> some bits to make the user experience better. It could be done with
> ansible playbook too, but I think a rpm is more convenient in this case.
>
>
On Thu, Aug 22, 2019 at 10:59 AM Stefan Wahren wrote:
>
> Hi Jan,
>
> On 22.08.19 11:31, Jan Kratochvil wrote:
> > On Wed, 26 Jun 2019 16:58:32 +0200, Jan Kratochvil wrote:
> >> And in 1.5 hours today it happened even with
> >> kernel-5.1.12-300.nocpufreq.fc30.aarch64. So it only matters how
Hi Stefan,
Firstly thanks for your work here.
> >>> But there are also lot of hacks. Currently the biggest part on Kernel
> >>> side is the PCIe driver which isn't upstreamed yet. Another problem is
> >>> that there is no U-Boot support yet.
> >> I figured as much, I had looked at the 4.19.y
Hi,
> I have done a nodebug kernel [1] on soas;KDE;LXDE with 32 GB microSD
> cards. All work smoothly and much faster afterwards.
>
That's to be expected, rawhide always has debug turned on except for the
first build of each RC.
Once we branch the debug gets turned off.
>
> Hello together,
>
> I'm in the process to build up a new mailserver.
>
> Old one: Odroid HC1 with CentOS 7; postfix with postscreen, amavis-new,
> spamassassin, clamav, dovecot < runs smoothly nearly 2 years.
>
> New One: Odroid HC1 with Fedora 30; postfix, dovecot, rspamd? < should
> be
On Fri, Jul 5, 2019 at 12:01 AM Jon Masters wrote:
>
> Hi fedora-arm,
>
> I think we have identified the root cause of the 32-bit builder issue. Many
> thanks to Paul and Peter for assistance in debugging. Here's my write-up, and
> we'll work with the vendor on a suitable mitigation to
On Wed, Jul 3, 2019 at 3:14 PM Stefan Wahren wrote:
>
> Hi Peter,
>
> On 03.07.19 14:10, Peter Robinson wrote:
> > Hi Stefan,
> >
> >>> loads but I don't get an error, just:
> >>> bcm2835-power bcm2835-power: Broadcom BCM2835 power domains dri
Hi Stefan,
> >>> I wasn't able to reproduce this on my available boards.
> >>>
> >>> Are you able to reproduce it?
> >> Well I see the "bcm2835-power bcm2835-power: Timeout waiting for grafx
> >> power OK" error across a pair of 3Bs and a 3A+, I don't see it on a
> >> 3B+ but that one is loading
Hi Felix,
Sorry for the late delay, some how this message hit my spam box.
> I managed to get Fedora 30 AARCH64 installed on a RPI 3B+ and it mostly runs
> great but I'm hitting a couple issues that I'm just not sure where to start
> looking.
>
> In order to make sure it's not the set of
> >>> Good day,
> >>> will Fedora 30 support Raspberry Pi 4, or we must wait to Fedora 31?
> >> a short statement from myself as the BCM2835 maintainer. The sources has
> >> been published yesterday. The BCM2835 feature window for Linux 5.3 is
> >> closed since 3 weeks. So the first kernel with
> On 25.06.19 15:20, fil...@centrum.cz wrote:
> > Good day,
> > will Fedora 30 support Raspberry Pi 4, or we must wait to Fedora 31?
>
> a short statement from myself as the BCM2835 maintainer. The sources has
> been published yesterday. The BCM2835 feature window for Linux 5.3 is
> closed since 3
> Good day,
> will Fedora 30 support Raspberry Pi 4, or we must wait to Fedora 31?
At the moment that is unknown. Fedora 31 will be the initial focus and
then once we know what the status is there I will be able to access
what the effort to get it running on F-30 will be and how much of a
support
On Thu, Aug 30, 2018 at 1:39 AM Ken Harris wrote:
>
> Is it possible to enable Bluetooth on Udoo Neo ? FYI, it uses the TI
> WL1831 module.
>
> I tried :
>
> hciattach -n ttymxc2 texas
>
> ... but got "Initialization timed out."
>
> I also tried various combinations of bit rates and flow
On Tue, Jun 25, 2019 at 9:03 AM Peter Robinson wrote:
>
> On Tue, Jun 25, 2019 at 6:51 AM Stefan Wahren wrote:
> >
> > On 24.06.19 17:44, Peter Robinson wrote:
> > > On Mon, Jun 24, 2019 at 4:09 PM Stefan Wahren
> > > wrote:
> > >> Hi Jan,
>
On Tue, Jun 25, 2019 at 6:51 AM Stefan Wahren wrote:
>
> On 24.06.19 17:44, Peter Robinson wrote:
> > On Mon, Jun 24, 2019 at 4:09 PM Stefan Wahren
> > wrote:
> >> Hi Jan,
> >>
> >> On 24.06.19 16:41, Jan Kratochvil wrote:
> >>> Hi a
> >
> > Nothing important, I can try also new installation of F-30.
> >
> >
> > On Thu, 20 Jun 2019 12:03:59 +0200, Peter Robinson wrote:
> >> What kernel is this?
> > kernel-5.2.0-0.rc5.git0.1.fc31.aarch64
> >
> >
> >> I'm presuming you
> Am 24.06.2019 um 08:47 schrieb Jan Kratochvil:
> > On Sun, 23 Jun 2019 22:11:55 +0200, Stefan Wahren wrote:
> >> Am 23.06.19 um 21:22 schrieb Jan Kratochvil:
> >>> So it looks as a Fedora-specific regression somewhere in the 5.0.x series.
> >> Please wait, i see that fc30 still uses this
On Mon, Jun 24, 2019 at 7:47 AM Jan Kratochvil
wrote:
>
> On Sun, 23 Jun 2019 22:11:55 +0200, Stefan Wahren wrote:
> > Am 23.06.19 um 21:22 schrieb Jan Kratochvil:
> > > So it looks as a Fedora-specific regression somewhere in the 5.0.x series.
> >
> > Please wait, i see that fc30 still uses this
> Am 23.06.19 um 21:22 schrieb Jan Kratochvil:
> > On Sun, 23 Jun 2019 12:32:14 +0200, Peter Robinson wrote:
> >> There's a few Fedora patches but nothing specific to mmc or the RPi
> >> mmc/sdhci modules.
> > kernel-5.0. 0-300.fc30.aarch64 PASS
> >
> On Sun, 23 Jun 2019 12:32:14 +0200, Peter Robinson wrote:
> > There's a few Fedora patches but nothing specific to mmc or the RPi
> > mmc/sdhci modules.
>
> kernel-5.0. 0-300.fc30.aarch64 PASS
> kernel-5.0. 0-300.vanilla.fc30.aarch64 PASS
> https://koji.fedo
> > On Sun, 23 Jun 2019 10:36:57 +0200, Stefan Wahren wrote:
> >> It would be helpful to send me this card and i'll try to fix this.
> > I have tracked it down so far to a regression between:
> > kernel-5.0.0-300.fc30.aarch64
> > kernel-5.0.17-300.fc30.aarch64
> >
> > And
On Fri, Jun 21, 2019 at 12:48 PM Jan Kratochvil
wrote:
>
> Hi,
>
> just copying from:
> https://bugzilla.redhat.com/show_bug.cgi?id=1607872#c8
>
> On Raspberry Pi 3B+ when I boot from MicroSD from USB adapter all works fine.
> When I use the same MicroSD into the MicroSD slot of Raspberry it
Hi Brion,
> I've got a Raspberry Pi 3b+ with Fedora 30 on SD cards running armv7 and
> aarch64. I recently installed updates with dnf on both after a few weeks, and
> after reboot I can no longer get into a graphical login.
What kernel is this? I'm presuming you're running the Workstation
On Fri, Jun 7, 2019 at 10:58 PM Steven A. Falco wrote:
>
> On 6/7/19 2:38 PM, Steven A. Falco wrote:
> > On 6/7/19 2:32 PM, Peter Robinson wrote:
> >> On Fri, Jun 7, 2019 at 7:28 PM Steven A. Falco
> >> wrote:
> >>>
> >>> On 6/7/19 2:26 PM,
On Fri, Jun 7, 2019 at 7:28 PM Steven A. Falco wrote:
>
> On 6/7/19 2:26 PM, Peter Robinson wrote:
> >> I have a wandboard quad, and I'd like to move the root filesystem to a
> >> sata drive. I have the drive connected and formatted, and I copied all of
> >&g
> I have a wandboard quad, and I'd like to move the root filesystem to a sata
> drive. I have the drive connected and formatted, and I copied all of "/" to
> a partition on the sata drive.
For the wandboard you can actually have the entire OS on SATA. The
only thing that needs to be on a SD
> can I use cron job to run nmcli on Fedora Server on PI 3?
I don't see why not, have you tried?
___
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-le...@lists.fedoraproject.org
Fedora Code of Conduct:
the output from the "lshw" command, for your reference.
>
> Geoff Marr
> IRC: coremodule
>
>
> On Sun, May 26, 2019 at 3:09 AM Peter Robinson wrote:
>>
>> Hi Geoff,
>>
>> > Forgive my ignorance but I am curious how one would go about making both
>&
Hi Geoff,
> Forgive my ignorance but I am curious how one would go about making both
> ethernet ports work on a NanoPi R1? I used an armhfp Fedora 30 Server image
> to boot into Fedora on the device, but out of the box only one ethernet port
> works; no wifi and the second ethernet port does
On Fri, May 24, 2019 at 5:57 PM Alessio wrote:
>
> On Fri, May 24, 2019, 6:33 PM Mostafa Faridi
> wrote:
>>
>> I remove all cfg files from /etc/sysconfig/network-scripts
>
>
> You could use nmcli con delete
>
>> But after reboot, I have to connect to Fedora server by keyboard anf and run
>>
On Fri, May 24, 2019 at 9:34 AM Mostafa Faridi
wrote:
>
> I want connect to hidden network by nmcli, but I do not know how. Search
> google can not help.
"man nmcli" if you're doing it from a command prompt, or check out the
NetworkManager online docs, or docs.fedoraproject.org and it;s all
On Wed, May 22, 2019 at 4:10 PM Mostafa Faridi
wrote:
>
> Thanks,
> But I use 5v 2A PSU for OSMC and it works like charm.
¯\_(ツ)_/¯
I have no idea what OSMC is let alone what it does, what kernel they
have or any number of tens of thousands of options that might make a
difference between Fedora
On Wed, May 22, 2019 at 12:27 PM Alessio wrote:
>
> Pretty strange. This doesn't happen to me, even if the LAN cable is connected
> or not when I power up the RPi.
>
>
> On Wed, May 22, 2019, 1:03 PM Mostafa Faridi
> wrote:
>>
>> I must for 3 min to boot process continue its process
As
On Tue, May 21, 2019 at 4:06 PM Mostafa Faridi
wrote:
>
> Thanks,
> Great work.
> but I do not want mac address change. I will disable change of MAC tonight.
> but about first error without press ctrl+c, Fedora cannot continue booting.
> I want to disable this future too.
Please read what I
On Tue, May 21, 2019 at 12:01 PM Alessio wrote:
>
> On Tue, 2019-05-21 at 11:54 +0100, Peter Robinson wrote:
> > I've not seen this with my usage, what image are you running on it?
>
> Fedora-Server-30-1.2.aarch64
>
> > https://blogs.gnome.org/thaller/2016
On Tue, May 21, 2019 at 10:46 AM Mostafa Faridi
wrote:
>
> I installed Fedora 30 Server on Raspberry 3.
> after I plug the power cord. Fedora starts to boot after sometimes I see this
> message
>
> lan78xx_eth waiting for PHY auto negotiation to complete
>
> and boot process stop.
> I must
On Tue, May 21, 2019 at 11:35 AM Alessio wrote:
>
> On Mon, 2019-05-20 at 23:20 +0200, Alessio wrote:
> > Hello.
> > If I'm not wrong, there was an issue, around Fedora 27 (or it was
> > 28?)
> > where the MAC address of the wifi card was different upon each
> > reboot.
>
> Uh, in addition the
i@raspi ~]$ lsb_release -d;uname -r
> Description: Fedora release 30 (Thirty)
> 5.0.10-300.fc30.aarch64
>
> On Fri, May 3, 2019 at 10:30 PM Peter Robinson wrote:
>>
>> On Fri, May 3, 2019 at 9:28 PM Peter Robinson wrote:
>> >
>> > > See below. Interesti
On Fri, May 3, 2019 at 9:28 PM Peter Robinson wrote:
>
> > See below. Interestingly "sudo grub2-mkconfig" resulted in permission
> > denied but "su" worked. Nevertheless, I am stilled faced w/
>
> Well there's no F-30 kernels installed so it's boot
00.fc29.aarch64
> Found initrd image: /boot/initramfs-5.0.10-200.fc29.aarch64.img
> Found linux image: /boot/vmlinuz-5.0.9-200.fc29.aarch64
> Found initrd image: /boot/initramfs-5.0.9-200.fc29.aarch64.img
> Found linux image: /boot/vmlinuz-5.0.6-200.fc29.aarch64
> Found initrd i
On Fri, May 3, 2019 at 8:45 PM Peter Robinson wrote:
>
> > https://fedoraproject.org/wiki/Architectures/ARM/Raspberry_Pi#aarch64_supported_images_for_Raspberry_Pi_3
> > only quotes Fedora 29.
> >
> > Description: Fedora release 30 (Thirty)
> > in combinati
On Fri, May 3, 2019 at 8:28 PM Andrew Gillis wrote:
>
> I want to install Fedora ARM on a 400GB SD card for use with imx6. The
> current images are have DOS partitions so they won't work on an SD that large.
>
> Is their an easy way to convert an image to GPT? I tried a few simple ways
> such
On Fri, May 3, 2019 at 7:04 PM wrote:
>
> Dear All,
>
> I have now disabled any DNS resolver related services and was able to
> reproduce your successful upgrades. However, I get
>
> [pi@raspi ~]$ lsb_release -d;uname -r
> Description: Fedora release 30 (Thirty)
> 5.0.10-200.fc29.aarch64
>
>
On Sat, Apr 20, 2019 at 4:01 PM Shad L. Lords wrote:
>
> I've got a koji instance I've setup that is building for both aarch64 and
> armv7hl. Right now I need two separate hosts. One for each arch. I notice
> that the fedora koji instance has most of their arm builders dedicated to one
>
r of the WiFi adapter?
> On April 20, 2019 at 4:16 AM Peter Robinson wrote:
> >
> >
> > On Sat, Apr 20, 2019 at 12:37 AM JAMES TATE
> wrote:
> > >
> > >
> > > > On April 19, 2019 at 6:29 PM Peter Robinson
> wrote:
> > > >
>
On Fri, Apr 19, 2019 at 6:18 PM JAMES TATE wrote:
>
> Error message on uboot.
>
> "Timeout poll on Interrupt endpoint"
>
>
> I have a Raspberry pi 2 B+ and Fedora-KDE-armhfp-29-1.2-sda.raw.xz installed
> on a 32gb SD card.
>
>
> I gather that it has something to do with USB ports. I have a WiFi
For reference this issue is now fixed in the 2019.04 GA build on it's
way to F-30 testing repos.
Peter
On Sun, Mar 3, 2019 at 10:18 PM Robert Moskowitz wrote:
>
> The environment is only the uboot on the uSD and all partitions on the
> sata HD.
>
> I have been doing this for years now with no
On Fri, Apr 19, 2019 at 2:34 PM JAMES TATE wrote:
>
> Can you use Etcher to burn raw.xz image to a SD card ?
TBH I've never tested, I believe people have, you can also use the
Fedora Media Writer which works on Mac/Windows.
> > On April 19, 2019 at 8:31 AM Peter Rob
On Fri, Apr 19, 2019 at 12:02 PM JAMES TATE wrote:
>
> Where do I download a image for Raspberry Pi
https://getfedora.org/
There's a link to the Arm images
___
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to
301 - 400 of 1641 matches
Mail list logo
