On Wed, 15 Aug 2018 12:56:36 +0200
Ricardo Wurmus wrote:
> Hi David Niklas,
>
> > As for my status, (since you did ask why the ML was silent), I'm hand
> > soldering an eDP connector. It is going poorly as the pins are so
> > small that I had to buy a set of 20x mag glasses.
>
> Have you
On Wed, 15 Aug 2018 12:56:36 +0200
Ricardo Wurmus wrote:
> Hi David Niklas,
>
> > As for my status, (since you did ask why the ML was silent), I'm hand
> > soldering an eDP connector. It is going poorly as the pins are so
> > small that I had to buy a set of 20x mag glasses.
>
> Have you
---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Mon, Aug 13, 2018 at 10:20 PM, Vincent wrote:
> Dear all,
>
> I'm a little bit worried since there has been no status update for
> quite a while and little to no activity on this mailing list for over 2
> weeks.
Hi David Niklas,
> As for my status, (since you did ask why the ML was silent), I'm hand
> soldering an eDP connector. It is going poorly as the pins are so small
> that I had to buy a set of 20x mag glasses.
Have you tried drag soldering? You would coat the pins and pads in
thick flux paste
@David -- I assume with your HDMI adapter, you're dealing with Chinese eBay
sellers. I find that you have to nag them (three times!) about everything
in order to get anything done. It's usually after the third nearly
identical message that they figure out that you actually want them to get
off
On Mon, 13 Aug 2018 23:20:19 +0200
Vincent wrote:
> Dear all,
>
> I'm a little bit worried since there has been no status update for
> quite a while and little to no activity on this mailing list for over 2
> weeks.
> any news would be highly appreciated.
Luke has been sooo busy he has been
Dear all,
I'm a little bit worried since there has been no status update for
quite a while and little to no activity on this mailing list for over 2
weeks. I started working on my own PCMCIA EOMA68 module and still rely
on the 3D-printed case and everything related to it (e.g., power
supply).
In