Re: No real-time clock, ntpd, and settime
On Sat, Jan 09, 2021 at 08:59:19PM +0100, Filippo Valsorda wrote: > Adding an RTC is definitely a solution, but the functionality to > support RTC-less boards is there in ntpd—and indeed works well when > connectivity is available from boot—it just doesn't work when network > access is delayed. > > I'd also rather use ntpd than rdate, since the former uses constraints > to check the validity of the otherwise unauthenticated received time. > > I'm happy to drop a patch for whatever behavior people think makes > sense, but I wanted feedback on what that might be. Should ntpd wait > longer for upstream connectivity? Should it be willing to do settime > even in securelevel 1, so a simple "rcctl restart ntpd" will fix the > time? The current behaviour is a balance between startup speed and working in most cases. I certainly would not like a long delay to be the default, it's too annoying when e.g. working on stuff that requires a lot of reboots in a no-net situation. settime in securelevel 1 is also not nice, jumping the clock once various daemon are started is not acceptable. Doing an rdate call has the same issue. A workaround might be to do a !sleep xx in your hostname.if file, to force a delay so your uplink is live when booting continues. In the meantime I'll do some more thinking about an approach that does not cause long delays for everybody while still solving your issue. -Otto > > 2021-01-09 18:29 GMT+01:00 Patrick Wildt : > > You can even get a Zigbee module combined with an RTC, and optional even > > PoE if you want. > > > > https://www.tindie.com/products/electrolama/zoe-rtc-zigbee-radio-and-rtc-for-raspberry-pi/ > > https://www.tindie.com/products/electrolama/zoe-poe-zigbee-radio-rtc-poe-for-raspberry-pi/ > > > > Am Sun, Jan 10, 2021 at 01:14:13AM +0800 schrieb Archimedes Gaviola: > > > Hi, > > > > > > As Mark have said, you can buy an RTC. For how many months right now my > > > standalone (not connected to the internet) Raspberry Pi 4B has been very > > > stable with time using DS3231 module > > > https://shopee.ph/DS3231-Mini-RTC-Module-i.18252381.315148783. Sharing to > > > you as well https://marc.info/?t=15981935891=1=2. > > > > > > Thanks and best regards, > > > Archimedes > > > > > > On Sun, Jan 10, 2021 at 12:37 AM Mark Kettenis > > > wrote: > > > > > > > > Date: Sat, 09 Jan 2021 17:24:59 +0100 > > > > > From: "Filippo Valsorda" > > > > > > > > > > (Emailing the arm@ list because this is a common issue on arm > > > > > platforms, > > > > > although not arm specific. Let me know if I should redirect.) > > > > > > > > > > I run a simple OpenBSD firewall on a RPi 4, which doesn't have a > > > > > real-time clock. When the power goes out, the firewall boots faster > > > > > than its upstream, so it doesn't have network connectivity in the > > > > > first > > > > > seconds. > > > > > > > > > > This interacts poorly with ntpd's settime logic: ntpd will only use > > > > > settime in securelevel 0 (see auto_preconditions() in ntpd.c), and > > > > > will > > > > > only try reaching the Internet twice, with a 1s pause, upon starting. > > > > > > > > > > The result is that the firewall boots, gives up on settime, and ends > > > > > up > > > > > stuck forever with a clock weeks old, enough to break the system, and > > > > > too far for ntp to catch up. > > > > > > > > > > I'm not sure what the right solution is. I think I would want ntpd to > > > > > wait until it has network connectivity at boot, but I'm not sure if > > > > > this > > > > > is something I should hack myself or maybe there's space for an ntpd > > > > > CLI > > > > > option. > > > > > > > > > > Opinions? > > > > > > > > Add an RTC to the Pi4. They can be bought for a few euros and can be > > > > enabled by adding the appropriate device tree overlay to the > > > > config.txt file on the firmware partition of your boot disk. > > > > > > > > > >
Re: No real-time clock, ntpd, and settime
Adding an RTC is definitely a solution, but the functionality to support RTC-less boards is there in ntpd—and indeed works well when connectivity is available from boot—it just doesn't work when network access is delayed. I'd also rather use ntpd than rdate, since the former uses constraints to check the validity of the otherwise unauthenticated received time. I'm happy to drop a patch for whatever behavior people think makes sense, but I wanted feedback on what that might be. Should ntpd wait longer for upstream connectivity? Should it be willing to do settime even in securelevel 1, so a simple "rcctl restart ntpd" will fix the time? 2021-01-09 18:29 GMT+01:00 Patrick Wildt : > You can even get a Zigbee module combined with an RTC, and optional even > PoE if you want. > > https://www.tindie.com/products/electrolama/zoe-rtc-zigbee-radio-and-rtc-for-raspberry-pi/ > https://www.tindie.com/products/electrolama/zoe-poe-zigbee-radio-rtc-poe-for-raspberry-pi/ > > Am Sun, Jan 10, 2021 at 01:14:13AM +0800 schrieb Archimedes Gaviola: > > Hi, > > > > As Mark have said, you can buy an RTC. For how many months right now my > > standalone (not connected to the internet) Raspberry Pi 4B has been very > > stable with time using DS3231 module > > https://shopee.ph/DS3231-Mini-RTC-Module-i.18252381.315148783. Sharing to > > you as well https://marc.info/?t=15981935891=1=2. > > > > Thanks and best regards, > > Archimedes > > > > On Sun, Jan 10, 2021 at 12:37 AM Mark Kettenis > > wrote: > > > > > > Date: Sat, 09 Jan 2021 17:24:59 +0100 > > > > From: "Filippo Valsorda" > > > > > > > > (Emailing the arm@ list because this is a common issue on arm platforms, > > > > although not arm specific. Let me know if I should redirect.) > > > > > > > > I run a simple OpenBSD firewall on a RPi 4, which doesn't have a > > > > real-time clock. When the power goes out, the firewall boots faster > > > > than its upstream, so it doesn't have network connectivity in the first > > > > seconds. > > > > > > > > This interacts poorly with ntpd's settime logic: ntpd will only use > > > > settime in securelevel 0 (see auto_preconditions() in ntpd.c), and will > > > > only try reaching the Internet twice, with a 1s pause, upon starting. > > > > > > > > The result is that the firewall boots, gives up on settime, and ends up > > > > stuck forever with a clock weeks old, enough to break the system, and > > > > too far for ntp to catch up. > > > > > > > > I'm not sure what the right solution is. I think I would want ntpd to > > > > wait until it has network connectivity at boot, but I'm not sure if this > > > > is something I should hack myself or maybe there's space for an ntpd CLI > > > > option. > > > > > > > > Opinions? > > > > > > Add an RTC to the Pi4. They can be bought for a few euros and can be > > > enabled by adding the appropriate device tree overlay to the > > > config.txt file on the firmware partition of your boot disk. > > > > > > >
Re: No real-time clock, ntpd, and settime
You can even get a Zigbee module combined with an RTC, and optional even PoE if you want. https://www.tindie.com/products/electrolama/zoe-rtc-zigbee-radio-and-rtc-for-raspberry-pi/ https://www.tindie.com/products/electrolama/zoe-poe-zigbee-radio-rtc-poe-for-raspberry-pi/ Am Sun, Jan 10, 2021 at 01:14:13AM +0800 schrieb Archimedes Gaviola: > Hi, > > As Mark have said, you can buy an RTC. For how many months right now my > standalone (not connected to the internet) Raspberry Pi 4B has been very > stable with time using DS3231 module > https://shopee.ph/DS3231-Mini-RTC-Module-i.18252381.315148783. Sharing to > you as well https://marc.info/?t=15981935891=1=2. > > Thanks and best regards, > Archimedes > > On Sun, Jan 10, 2021 at 12:37 AM Mark Kettenis > wrote: > > > > Date: Sat, 09 Jan 2021 17:24:59 +0100 > > > From: "Filippo Valsorda" > > > > > > (Emailing the arm@ list because this is a common issue on arm platforms, > > > although not arm specific. Let me know if I should redirect.) > > > > > > I run a simple OpenBSD firewall on a RPi 4, which doesn't have a > > > real-time clock. When the power goes out, the firewall boots faster > > > than its upstream, so it doesn't have network connectivity in the first > > > seconds. > > > > > > This interacts poorly with ntpd's settime logic: ntpd will only use > > > settime in securelevel 0 (see auto_preconditions() in ntpd.c), and will > > > only try reaching the Internet twice, with a 1s pause, upon starting. > > > > > > The result is that the firewall boots, gives up on settime, and ends up > > > stuck forever with a clock weeks old, enough to break the system, and > > > too far for ntp to catch up. > > > > > > I'm not sure what the right solution is. I think I would want ntpd to > > > wait until it has network connectivity at boot, but I'm not sure if this > > > is something I should hack myself or maybe there's space for an ntpd CLI > > > option. > > > > > > Opinions? > > > > Add an RTC to the Pi4. They can be bought for a few euros and can be > > enabled by adding the appropriate device tree overlay to the > > config.txt file on the firmware partition of your boot disk. > > > >
Re: No real-time clock, ntpd, and settime
Hi, As Mark have said, you can buy an RTC. For how many months right now my standalone (not connected to the internet) Raspberry Pi 4B has been very stable with time using DS3231 module https://shopee.ph/DS3231-Mini-RTC-Module-i.18252381.315148783. Sharing to you as well https://marc.info/?t=15981935891=1=2. Thanks and best regards, Archimedes On Sun, Jan 10, 2021 at 12:37 AM Mark Kettenis wrote: > > Date: Sat, 09 Jan 2021 17:24:59 +0100 > > From: "Filippo Valsorda" > > > > (Emailing the arm@ list because this is a common issue on arm platforms, > > although not arm specific. Let me know if I should redirect.) > > > > I run a simple OpenBSD firewall on a RPi 4, which doesn't have a > > real-time clock. When the power goes out, the firewall boots faster > > than its upstream, so it doesn't have network connectivity in the first > > seconds. > > > > This interacts poorly with ntpd's settime logic: ntpd will only use > > settime in securelevel 0 (see auto_preconditions() in ntpd.c), and will > > only try reaching the Internet twice, with a 1s pause, upon starting. > > > > The result is that the firewall boots, gives up on settime, and ends up > > stuck forever with a clock weeks old, enough to break the system, and > > too far for ntp to catch up. > > > > I'm not sure what the right solution is. I think I would want ntpd to > > wait until it has network connectivity at boot, but I'm not sure if this > > is something I should hack myself or maybe there's space for an ntpd CLI > > option. > > > > Opinions? > > Add an RTC to the Pi4. They can be bought for a few euros and can be > enabled by adding the appropriate device tree overlay to the > config.txt file on the firmware partition of your boot disk. > >
Re: No real-time clock, ntpd, and settime
> Date: Sat, 09 Jan 2021 17:24:59 +0100 > From: "Filippo Valsorda" > > (Emailing the arm@ list because this is a common issue on arm platforms, > although not arm specific. Let me know if I should redirect.) > > I run a simple OpenBSD firewall on a RPi 4, which doesn't have a > real-time clock. When the power goes out, the firewall boots faster > than its upstream, so it doesn't have network connectivity in the first > seconds. > > This interacts poorly with ntpd's settime logic: ntpd will only use > settime in securelevel 0 (see auto_preconditions() in ntpd.c), and will > only try reaching the Internet twice, with a 1s pause, upon starting. > > The result is that the firewall boots, gives up on settime, and ends up > stuck forever with a clock weeks old, enough to break the system, and > too far for ntp to catch up. > > I'm not sure what the right solution is. I think I would want ntpd to > wait until it has network connectivity at boot, but I'm not sure if this > is something I should hack myself or maybe there's space for an ntpd CLI > option. > > Opinions? Add an RTC to the Pi4. They can be bought for a few euros and can be enabled by adding the appropriate device tree overlay to the config.txt file on the firmware partition of your boot disk.