I have a Dockstar coming directly from Seagate ($39 USD) and would like
to run ARMedslack on it. Is there a single site that provides
instructions on how I would go about this? Since I am using Salix on my
desktops, I want to replace my N2SLU running SlugOS with the Dockstar
running
I believe Jeff Doozan uboot is capable of doing this.
http://jeff.doozan.com/debian/uboot/
Rich Lapointe
On Wed, Feb 16, 2011 at 10:37 AM, Stuart Winter m-li...@biscuit.org.ukwrote:
does anybody know if U_Boot already supports loading the kernel of a
UbiFS
partition? I've built U-Boot
Yeah, I got fooled by this. Would had replied but you had it solve before I
finished reading the thread.
BTW, I have three Dockstars all with their own Seagate Freeagent Go drives
running ARMedSlack 13.37RC1 and booting from Doozan's uboot. I also use his
Rescue System. I setup the first
On 10/04/2011 01:03 PM, lee jones wrote:
My problem was that normal armedslack needs an nfs install/boot, and I
did try the instructions but I've *never* even used any sort of nfs
install or boot so I found using the miniroot easier. Unless there's
some way of installing via an alternative
Gregg,
I've got two Pogoplugs, both Pogo P21 that are really E02 versions.
Check the label on the bottom of the stand for the model number.
http://www.jr.com/pogoplug/pe/PGG_POGOP21/
http://www.jr.com/pogoplug/pe/PGG_POGOP21
Same hardware as Dockstars with 256M ram. These are kirkwood base,
On 07/10/2012 11:46 PM, Gregg Levine wrote:
On Tue, Jul 10, 2012 at 5:39 PM, Richrichard.lapoi...@gmail.com wrote:
On 07/10/2012 03:50 PM, Stuart Winter wrote:
Is this device completely supported by the ARM Slackware port?
I guess Stuart would say: it's not a case of porting - it's just
Maybe you need a new uboot :
http://forum.doozan.com/read.php?3,6965oot
I use this uboot in my dockstar and 2 pogoplug P21 (E02) kirkwood base
NAS. All three are running Slackwarearm 14.0
I also use these for my serial connection.
One thing I noticed is that u-boot-tools (fw_printenv ... ect) seems
to be missing from the slackware arm 14 repo ... I forgot where I got
it from on 13.37 but on my old armedslack 13.37 it's installed:
u-boot-tools-2010.12rc1-arm-1
It's in the repo
root@pogo-161:/home/rich# slapt-get
Maybe this will help
http://forum.doozan.com/read.php?2,12045,12045#msg-12045
Rich Lapointe
On 04/22/2013 08:49 AM, Davide wrote:
I decided it was time to pull out the goflexnet and hook up two 2.5
sata drives on it.
I've slackware arm 14 running on it but I can't seem to see anything
like a
Hi,
Would it be possible to add the following offsets in the stock
/etc/fw_env.conf file?
# Dockstar and Pogoplug offsets:
/dev/mtd00xc0x20x2
I have several Kirkwood based Dockstars and Pogoplugs running
Slackwarearm and I always have to update this
Thanks!
Rich Lapointe
On 09/23/2013 12:16 PM, Stuart Winter wrote:
Would it be possible to add the following offsets in the stock
/etc/fw_env.conf file?
Yes I've added it into the config file and it'll be pushed out in the next
batch.
___
ARMedslack
Stuart,
First thanks for all the work you put into Slackwarearm, it's really
appreciated here.
Just want to let you know that I successfully updated a couple of my
Dockstar with 14.1 RC1. Update is really the wrong word as these were
essentially fresh installs using the installer. This is
12 matches
Mail list logo