Re: [ARTIQ] Elementary problems with Kasli

2018-10-02 Thread Hanhijärvi Kalle via ARTIQ
nt: 1. lokakuuta 2018 20:04 To: Hanhijärvi Kalle Cc: artiq@lists.m-labs.hk Subject: Re: [ARTIQ] Elementary problems with Kasli Hi Kalle, On 1 Oct 2018, at 15:30, Hanhijärvi Kalle via ARTIQ wrote: > Following this I set IP and MAC addresses: > > $ artiq_mkfs flash_storage.img -s mac 75:53:7b:

Re: [ARTIQ] Elementary problems with Kasli

2018-10-01 Thread Sébastien Bourdeauducq via ARTIQ
On 10/01/2018 10:30 PM, Hanhijärvi Kalle via ARTIQ wrote: On Kasli, I'm using SFP0 port for the fiber. Is the LED next to SFP0 turned on? That's the Ethernet connection status indicator. ___ ARTIQ mailing list https://ssl.serverraum.org/lists/listin

Re: [ARTIQ] Elementary problems with Kasli

2018-10-01 Thread David Nadlinger via ARTIQ
Hi Kalle, On 1 Oct 2018, at 15:30, Hanhijärvi Kalle via ARTIQ wrote: Following this I set IP and MAC addresses: $ artiq_mkfs flash_storage.img -s mac 75:53:7b:9c:63:14 -s ip 192.168.1.10 $ artiq_flash -t kasli -f flash_storage.img storage start Now I tried to write the core kernel to the boa

[ARTIQ] Elementary problems with Kasli

2018-10-01 Thread Hanhijärvi Kalle via ARTIQ
Hello, I'm not sure if this is the right forum for a technical question such as this, so my apologies if this is inappropriate. We recently acquired Kasli (v. 1.1.) board with Urukul DDS addon, and now we've had some elementary problems when in the installation. So I've been following the 4.0.