Anyone get it working on 1.4. Checked out their
website no updates for some time now...
Sorry for the late post. I'm tying to catch up on my email. I have three
systems using it. One with 1.4.3 and the other two on 1.4.5 if you still
need help.
John
Hello,
I got a little problem here. My Setup is like this,
Service provider - ser - asterisk - termination provider.
I have a sip trunk on asterisk pointing to ser,
allow=ulawalaw
context=from-trunk
disallow=all
dtmfmode=inband
host=ser ip address
insecure=very
type=peer
This works with
On Wed, 20 Jun 2007, Tom Lanyon wrote:
Hi list,
Does anyone have any advice on the following:
Incoming calls to our office come in on a SIP trunk. Since all our
offices/desks are in close proximity, we would like just a single
phone to ring when a call comes in instead of ringing every
Ok. But Im sure I was using only 2 include levels i.e. a file included
from a file included and that there was no circular nesting. Here is my
scenario -
queues.conf
#include sales-queue.conf
#include support-queue.conf
.
.
.
#include billing-queue.conf
Then I have a file defaults.conf which
Dear ALL
I want to use IVR on my asterisk auto attendent call feature so
basically how do i configure IVR and how do i tell to my asterisk which call is
local or which call comming from outside world
-
Fussy? Opinionated? Impossible to please?
Thing is that i have setup 79 extention for call routing on avaya then how do i
setup 0 for PSTN dialtone
David Boyd [EMAIL PROTECTED] wrote: On Fri, 2007-06-22 at 05:59 -0700, satish
patel wrote:
can u give me example how do i create plan for this task or job
ram wrote:
Hi all
On the Asterisk website in the blog its announced that in a next release
Asterisk would support dynamic DUNDi weitht values. I've installed Asterisk
1.4.4 (via aptitude install) but this doesn't seem to work. Has somebody some
experience with this or know whether this feature is already
José Luis Ledesma schrieb:
In my asterisk 1.4.5 chan_features.so has been installed properly...
check in your asterisk-source if /channels/chan_features.so is present
regards,
Jack escribió:
Is chan_features.so deprecated for asterisk 1.4.5 or why is this
module not installed by
Joe acquisto wrote:
What would I need to do, or where is the reading material, for what I need to
do, to convert the Hylafax server to use the T1 line? Reliably. Preferably
to use DID's as well.
Joe,
Since the users list is taking up to 2 days for messages to come though,
I included
Hi all,
If anyone has access to the manuals for a TAS240 voice band subscriber loop
emulator or a TAS
Series 2 Digital network emulator, I'd love to here from you.
Thanks.
Steve
___
--Bandwidth and Colocation Provided by
Hi Satish,
Are you familiar with Trixbox? (www.trixbox.org
http://www.trixbox.org/ )
It's a 'pre-configured' version of Asterisk that has IVR already built
in. You might want to check it out as an easy way of implementing IVR
and other feautures.
Regards,
Dean Collins
Cognation Pty
Hi List;
I am facing a problem relaed to menuselect when I am
trying to compile zaptel -1.4.2.1, the error as
following:
[EMAIL PROTECTED] zaptel-1.4.2.1]# make linux26
make[1]: Entering directory
`/usr/src/asterisk-1.4.4/zaptel-1.4.2.1/menuselect'
make[2]: Entering directory
Yep freshtel/tesco sell one.
Regards,
Dean Collins
Cognation Pty Ltd
[EMAIL PROTECTED]
+1-212-203-4357 Ph
+61-2-9016-5642 (Sydney in-dial).
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Ronaldo Z. Afonso
Sent: Saturday, 23
Hi List;
I think my problem in Zaptel compilation is related to
autoconf: no input file, anyone has an advise?
Also, I did a change in the Makefile existed in the
following path:
/usr/src/kernels/2.6.20-1.2319.fc5-i686/
EXTRAVERSION = 2.6.20-1.2319.fc5
Now, if I run uname -r then I get
On Sat, 23 Jun 2007, Ronaldo Z. Afonso wrote:
Hi all,
Does anybody know any USB phone that I can use as an IAX Client?
Thanks.
I've used several generic USB phone devices with IDEFISK and they all
just work - for a certian value of work - getting the buttons on the
phone to work is the
Hi all,
Does anybody know any USB phone that I can use as an IAX Client?
Thanks.
Ronaldo.
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
Hi
On Sat, Jun 23, 2007 at 03:05:47AM -0700, satish patel wrote:
Dear ALL
I want to use IVR on my asterisk auto attendent call
feature so basically how do i configure IVR and how do i tell to
my asterisk which call is local or which call comming from outside world
Carsten Bock wrote:
See the 1.4.5 Changelog:
(http://ftp.digium.com/pub/asterisk/ChangeLog-1.4.5)
2007-06-07 19:46 + [r68196] Olle Johansson [EMAIL PROTECTED]
* channels/chan_features.c: Disable chan_features by default in
menuselect
Well isn't THAT enlightening?!? Anyone
On Sat, Jun 23, 2007 at 08:48:23AM -0700, bilal ghayyad wrote:
Hi List;
I think my problem in Zaptel compilation is related to
autoconf: no input file, anyone has an advise?
autoconf? What is it? Please reply to your original message rather than
starting a new one. This makes it easier to
Hi Bilal,
Have you done ./configure in the zaptel directory before to do make
menuselect ?
Best Regards,
Francois BERGERET,
France.
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or
Oops !
Not seen that you have already done ./configure because I have not read
your message until the end.
Sorry !
What was the output after that ?
Francois
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users
On Sat, 23 Jun 2007 16:37:50 +0100 (BST), Gordon Henderson wrote:
On Sat, 23 Jun 2007, Ronaldo Z. Afonso wrote:
Hi all,
Does anybody know any USB phone that I can use as an IAX Client?
Thanks.
I've used several generic USB phone devices with IDEFISK and they all
just work - for a certian
On 6/23/07, Andre Wangler [EMAIL PROTECTED] wrote:
On the Asterisk website in the blog its announced that in a next release
Asterisk would support dynamic DUNDi weitht values. I've installed Asterisk
1.4.4 (via aptitude install) but this doesn't seem to work. Has somebody
some experience with
On 6/21/07, Ronaldo Z. Afonso [EMAIL PROTECTED] wrote:
I just started programming using AGI and I have a simple question about
STDERR.
If I understood it right, all the messages sent to STDERR should be
shown in the Asterisk console, but using the following python code I
just can't see
Hello,
You need to setup the following architecture:
Asterisk --IAXModemHylafax
Then route inboud Fax calls to IAXModem extension
outgoing faxes, are sent from user as pdf attachment to Hylafax as email
with Destination number in subject, then there is a script hylafax2email
pooling
Hi all,
I was reading an IAX RFC, or a kind of, and it mentioned something about
Call Path Optimization. Does Asterisk provide such a feature?
Thanks.
Ronaldo.
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users
Lol- someone read my blog post this afternoon about New Yorks finest new
mode of transportation
http://digg.com/offbeat_news/New_York_Cops_Driving_Exotics
Any Digg users out there want to vote it up for me?
Cheers,
Dean
___
On 23/06/2007, at 6:01 PM, Gordon Henderson wrote:
Can't you give the ringer phone a different ring tone/tune ?
Gordon
Gordon,
Well, we can give the 'ringer phone' whatever ring tone we wish, but
that's not the issue at hand.
We need a way to answer the incoming call on our personal
Tom,
It sounds like this is what you need:
http://www.voip-info.org/wiki/view/Asterisk+callgroups+and+pickupgroups
Cheers,
On 6/23/07, Tom Lanyon [EMAIL PROTECTED] wrote:
On 23/06/2007, at 6:01 PM, Gordon Henderson wrote:
Can't you give the ringer phone a different ring tone/tune ?
29 matches
Mail list logo
