*Quote:*
[r...@vicidialnow src]# service network restart
Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
Bringing up interface eth1: skge device eth1 does not seem to be present,
delaying
. . .
What version of asterisk is it?
1.4.4
What is the output of:
cat /proc/zaptel/*
Span 1: ZTDUMMY/1 ZTDUMMY/1 (source: RTC) 1
Span 2: WCTDM/0 Wildcard TDM400P REV I Board 1
1 WCTDM/0/0 FXOKS
2 WCTDM/0/1 FXOKS
3 WCTDM/0/2 FXSKS
4
On Saturday, January 24, 2009, j...@j4computers.com wrote:
This is, hopefully, just a case of brain fade.
With zapata.conf and zaptel.conf in place, asterisk loaded, no dial
plan and all LEDS on the card lit, I get no dial tone, plugging an
analog phone into ports 1 or 2, only a buzz and
On 1/25/2009 at 6:38 AM, j...@j4computers.com j...@j4computers.com
wrote:
. . .
What version of asterisk is it?
1.4.4
What is the output of:
cat /proc/zaptel/*
Span 1: ZTDUMMY/1 ZTDUMMY/1 (source: RTC) 1
Span 2: WCTDM/0 Wildcard TDM400P REV I Board 1
1
It is giving a dial tone now. I am not quite sure what fixed it.
I did remove a typo or two (gasp!) from the zapata.conf file and had to remove
the ; as there were some complaints about that.
A reboot and restart seemed to . . . oh, wait, I also swapped the board's power
connector for
Hi i must build a small phone pbx system.
My friend has :
3 phone analog lines
6 phone extension
How can i build that thelephone system?
Nightduke
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
I had the same problem doing SIP - IAX, 1.4.19.1 as well as the last 1.4.22
In my case I was trying to do FAX and the blips were breaking lots of
the faxes. My solution was to switch to T.38 over SIP and (cross my
fingers) the problems haven't came back so far.
I don't know the source of the
Type how to build an asterisk PBX in google
CS
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of nightduke
Sent: Sunday, January 25, 2009 9:09 AM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users]
In windows, we use BAT file to execute few series of command , which help us
in not writing each command manually everytime we want to execute those
commands.
In CentOS, I want to do the same thing.
Any Advice ?
___
-- Bandwidth and Colocation Provided
Linux incorporates this functionality using shell scripts. You're likely
using BASH as your shell, check out this link for a decent BASH scripting
tutorial: http://tldp.org/HOWTO/Bash-Prog-Intro-HOWTO.html
--
Alex Robar
alex.ro...@gmail.com
On Sun, Jan 25, 2009 at 11:34 AM, David @ULC
David @ULC wrote:
In windows, we use BAT file to execute few series of command , which
help us in not writing each command manually everytime we want to
execute those commands.
In CentOS, I want to do the same thing.
Any Advice ?
In windows, we use BAT file to execute few series of command , which help
us in not writing each command manually everytime we want to execute those
commands.
In CentOS, I want to do the same thing.
Any Advice ?
___
Start here:
In linux, there is a what is named shell script, for example bash script.
It is a powerful util allowing you to do almost everything with the system.
Combined with awk and sed , bash become more than powerful.
google about bash doc and you'l find all you need.
2009/1/25, David @ULC
On Sun, Jan 25, 2009 at 10:04:23PM +0530, David @ULC wrote:
In windows, we use BAT file to execute few series of command , which help us
in not writing each command manually everytime we want to execute those
commands.
In CentOS, I want to do the same thing.
Scripts. Shell scripts are
Sorry to bump it , but any help ?
Like un-installing the driver and reinstalling it will solve the issue ?
Or shld I reinstall the OS again ?
On Sun, Jan 25, 2009 at 2:53 PM, David @ULC ucoms2...@gmail.com wrote:
*Quote:*
[r...@vicidialnow src]# service network restart
Shutting down
On Sun, Jan 25, 2009 at 10:43:17PM +0530, David @ULC wrote:
Sorry to bump it , but any help ?
Like un-installing the driver and reinstalling it will solve the issue ?
This is not an Asterisk issue. This is a distribution issue. Ask on a
CentOS mailing list.
It would also help if you'd provide
I want to write below comands in a bat file and run the shell file so that
it runs all commands automatically ?
wget
http://asterisk.hosting.lv/bin12/codec_g723-ast12-gcc4-glibc-pentium4.so
cp codec_g723-ast12-gcc4-glibc-pentium4.so
/usr/lib/asterisk/modules/codec_g723.so
chmod +x
Why? This is not an Asterisk problem...
You need to find a forum specific to your linux distro...
Lyle
David @ULC wrote:
Sorry to bump it , but any help ?
Like un-installing the driver and reinstalling it will solve the issue ?
Or shld I reinstall the OS again ?
On Sun, Jan 25, 2009 at
Sorry for Off topic question
On Sun, Jan 25, 2009 at 10:04 PMorry, David @ULC ucoms2...@gmail.comwrote:
In windows, we use BAT file to execute few series of command , which help
us in not writing each command manually everytime we want to execute those
commands.
In CentOS, I want to do the
Sorry for Off topic Question
On Sun, Jan 25, 2009 at 10:43 PM, David @ULC ucoms2...@gmail.com wrote:
Sorry to bump it , but any help ?
Like un-installing the driver and reinstalling it will solve the issue ?
Or shld I reinstall the OS again ?
On Sun, Jan 25, 2009 at 2:53 PM, David @ULC
On Saturday 24 January 2009, j...@j4computers.com wrote:
This is, hopefully, just a case of brain fade.
With zapata.conf and zaptel.conf in place, asterisk loaded, no dial plan
and all LEDS on the card lit, I get no dial tone, plugging an analog phone
into ports 1 or 2, only a buzz and click.
the code will be:
wget
http://asterisk.hosting.lv/bin12/codec_g723-ast12-gcc4-glibc-pentium4.so
cp codec_g723-ast12-gcc4-glibc-pentium4.so
/usr/lib/asterisk/modules/codec_g723.so
chmod +x /usr/lib/asterisk/modules/codec_g723.so
wget
*1) What name I have to save it.Like what extension ?*
3) How I save it ?
*2) How to run it to execute it ?*
Should i do
vi autobatch
and then type and then save it ?
*** have to save. And Most importantly how to run it ?*
On Sun, Jan 25, 2009 at 10:04 PM, David @ULC
On Sun, 25 Jan 2009, David fire wrote:
the code will be:
wget
http://asterisk.hosting.lv/bin12/codec_g723-ast12-gcc4-glibc-pentium4.so
cp codec_g723-ast12-gcc4-glibc-pentium4.so
/usr/lib/asterisk/modules/codec_g723.so
chmod +x /usr/lib/asterisk/modules/codec_g723.so
Loadable modules do
learn to use google.
http://tldp.org/LDP/Bash-Beginners-Guide/html/sect_02_02.html
2009/1/25 David @ULC ucoms2...@gmail.com
*1) What name I have to save it.Like what extension ?*
3) How I save it ?
*2) How to run it to execute it ?*
Should i do
vi autobatch
and then type and then
Can you describe your LAN topology?
Asterisk Server ? Softphone1 ? Softphone2 ?
Cesar
2009/1/25 Vinicius Neves vinicius.ne...@live.com:
hello! i'm new to asterisk.
i'm using CentOS 5.2 + ASterisk 1.6
when i finish installing asterisk, i configure sip.conf like:
[4455]
type=friend
paste all your sip.conf or attach it.
David
2009/1/24 Vinicius Neves vinicius.ne...@live.com
hello! i'm new to asterisk.
i'm using CentOS 5.2 + ASterisk 1.6
when i finish installing asterisk, i configure sip.conf like:
[4455]
type=friend
username=4455
secret=1234
host=dynamic
1. Save it as you want, I allways use .sh
2. Then chmod 755 filename.sh
4. to runit ./filename
Hope it helps
2009/1/25 Geraint Lee gera...@gmail.com:
learn to use google.
http://tldp.org/LDP/Bash-Beginners-Guide/html/sect_02_02.html
2009/1/25 David @ULC ucoms2...@gmail.com
1) What name
2009/1/25 David @ULC ucoms2...@gmail.com
*1) What name I have to save it.Like what extension ?*
extension? that isnt important but the common is to use .sh for shell
scripts
**
3) How I save it ?
open any text editor write and save
*2) How to run it to execute it ?*
set runing
hi
wich soft phone do you recomend but i need this feature it must ask for user
name and password when it start.
i know xline and zoipper but they dont have that i can acomplish this whit
twinkle but i need it for Windows :-(
any ideas?
thanks
--
(\__/)
(='.'=)This is Bunny. Copy and paste
Suggestions for coming up to speed on simple dial plan. I have not done them
in at least a year and my backup files seem not to have survived various PC h/d
migrations.
I downloaded visual dialplan standard, but it refuses to connect remotely to my
* box. Even tho I can putty into it.
joe
On Sun, Jan 25, 2009 at 02:02:49PM -0500, j...@j4computers.com wrote:
Suggestions for coming up to speed on simple dial plan. I have not
done them in at least a year and my backup files seem not to have
survived various PC h/d migrations.
The sample extensions.dconf has an example IVR as
nightduke schrieb:
Hi i must build a small phone pbx system.
My friend has :
3 phone analog lines
6 phone extension
How can i build that thelephone system?
http://www.the-asterisk-book.com/unstable/minimale-telefonanlage.html
*1) What name I have to save it.Like what extension ?*
extension? that isnt important but the common is to use .sh for shell
scripts
That's one of the strange things you'll notice if you're used to a Windows
environment. Under Linux, it doesn't matter if you give your script a file
. . .
The sample extensions.dconf has an example IVR as well as a sample
extension or two.
I don't seem to have one, in this install. And, strangely, not found one via
google, either.
joe a.
___
-- Bandwidth and Colocation Provided by
My extensions.conf file looks like this:
[line-2]
exten = s,1,Answer()
exten = s,n,Playback(is-curntly-busy)
exten = s,n,Hangup()
[line-1]
exten = s,1,Answer()
exten = s,n,Playback(is-curntly-busy)
exten = s,n,Hangup()
[phone-1]
~
~
Simple enough, but all I get is the goodby message and this
i am used eyebeam is a good softphone
On Sun, Jan 25, 2009 at 12:55 PM, David fire ddf...@gmail.com wrote:
hi
wich soft phone do you recomend but i need this feature it must ask for
user name and password when it start.
i know xline and zoipper but they dont have that i can acomplish this
I had several panic attacks after upgrading to 1.4.22 but now we have no
dial tone on the T1. Urgent production system.
On Tue, Jan 13, 2009 at 5:13 AM, Benoit maver...@maverick.eu.org wrote:
Personnaly, i had recently encountered a global machine check exception
with
two cards (TE220p and
More information
service dahdi start
Loading DAHDI hardware modules:
FATAL: Module dahdi not found.
wct4xxp: [ OK ]
Error: missing /dev/dahdi!
[r...@newmark1 ~]#
On Sun, Jan 25, 2009 at 3:31 PM, broadband Voice
broadbandvo...@gmail.comwrote:
do you have any dahdi card ???
if not edit /etc/dahdi/modules so it dosent load any modules.
David
2009/1/25 broadband Voice broadbandvo...@gmail.com
More information
service dahdi start
Loading DAHDI hardware modules:
FATAL: Module dahdi not found.
wct4xxp:
Yes, we have Digium Asterisk card in. It used to be zaptel working with
1.4.19 but we upgraded to 1.4.22 and now run dahdi because of one way audio
problems.
On Sun, Jan 25, 2009 at 4:34 PM, David fire ddf...@gmail.com wrote:
do you have any dahdi card ???
if not edit /etc/dahdi/modules so
More Info
[r...@newmark1 ~]# dahdi_cfg
Notice: Configuration file is /etc/dahdi/system.conf
line 0: Unable to open master device '/dev/dahdi/ctl'
1 error(s) detected
[r...@newmark1 ~]#
On Sun, Jan 25, 2009 at 4:46 PM, broadband Voice
broadbandvo...@gmail.comwrote:
Yes, we have Digium Asterisk
run
dahdi_cfg -
and send me the output.
David
2009/1/25 broadband Voice broadbandvo...@gmail.com
More Info
[r...@newmark1 ~]# dahdi_cfg
Notice: Configuration file is /etc/dahdi/system.conf
line 0: Unable to open master device '/dev/dahdi/ctl'
1 error(s) detected
[r...@newmark1
On Sun, Jan 25, 2009 at 04:18:20PM -0500, broadband Voice wrote:
More information
service dahdi start
Loading DAHDI hardware modules:
FATAL: Module dahdi not found.
This is returned from 'modprobe dahdi' .
It means you probably don't have the dahdi modules installed. At least
not for you
also run dahdi_scan and dahdi_hardward
send me the out put
David
2009/1/25 David fire ddf...@gmail.com
run
dahdi_cfg -
and send me the output.
David
2009/1/25 broadband Voice broadbandvo...@gmail.com
More Info
[r...@newmark1 ~]# dahdi_cfg
Notice: Configuration file is
[r...@newmark1 ~]# dahdi_scan and dahdi_hardward
Unable to open /dev/dahdi/ctl: No such file or directory
[r...@newmark1 ~]#
On Sun, Jan 25, 2009 at 4:54 PM, David fire ddf...@gmail.com wrote:
also run dahdi_scan and dahdi_hardward
send me the out put
David
2009/1/25 David fire
also run dahdi_scan and dahdi_hardward
send me the out put
David
2009/1/25 David fire ddf...@gmail.com
run
dahdi_cfg -
and send me the output.
David
2009/1/25 broadband Voice broadbandvo...@gmail.com
More Info
[r...@newmark1 ~]# dahdi_cfg
Notice: Configuration file is
you dont have dahdi properly installed.
did you install BOTH dahdi utils and dahdi modules
if you want i can ssh your server and see what is happening, send me the ip
and login details to my email no to the list.
David
2009/1/25 broadband Voice broadbandvo...@gmail.com
[r...@newmark1 ~]#
Hi List;
I need to do a call transfer using analoge phone connected to fxs, but I do not
need this to be done using flash hook, let it to be using the # or * or any
code, but how I can configure that this code is for transfer? Also, I do not
need the flast hook to be used for trasfer as it
But eyebeam support g729 codec?
And does it support IAX?
By the way: I am looking for softphone to has as messanger? Ability to have
users login, and sending text message in addition to having voice calls? Any
advise?
Where to be find?
Regards
Bilal
--
i am used eyebeam is a
## will do it.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of bilal ghayyad
Sent: Sunday, January 25, 2009 5:03 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] Zaptel transfer using any
there isnt any free soft phone wich support G729.
2009/1/25 bilal ghayyad bilmar...@yahoo.com
But eyebeam support g729 codec?
And does it support IAX?
By the way: I am looking for softphone to has as messanger? Ability to have
users login, and sending text message in addition to having
features.conf
2009/1/25 Michael Stults mstu...@tds.net
## will do it.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of bilal
ghayyad
Sent: Sunday, January 25, 2009 5:03 PM
To:
Try iaxLite or sipLite
- Original Message -
From: David fire
To: bilmar...@yahoo.com ; Asterisk Users Mailing List - Non-Commercial
Discussion
Sent: Monday, January 26, 2009 7:43 AM
Subject: Re: [asterisk-users] soft phone
there isnt any free soft phone wich support
In my journey to resurrect my system and reacquaint myself with *, I am now at
the point where I can dial in and answer with an analog phone.
A good time to record greetings. So copied the appropriate (66xx stuff) from
the asterisk manual (pg 299), into the dial plan, and restarted. I am
But how can I have a one that has messanger facilities? Ability to see who is
login and send sms, in addition to do a calls?
Regards
Bilal
---
Try iaxLite or sipLite
- Original Message -
From: David fire
To: bilmar...@yahoo.com ; Asterisk Users Mailing List -
j...@j4computers.com schrieb:
In my journey to resurrect my system and reacquaint myself with *, I am now
at the point where I can dial in and answer with an analog phone.
A good time to record greetings. So copied the appropriate (66xx stuff) from
the asterisk manual
Which one?
(pg
On 1/25/2009 at 7:35 PM, Philipp Kempgen philipp.kemp...@amooma.de wrote:
j...@j4computers.com schrieb:
In my journey to resurrect my system and reacquaint myself with *, I am now
at the point where I can dial in and answer with an analog phone.
A good time to record greetings. So copied
And flash hook will not work for transfer? I do not need it to work as it cause
confusion. How?
Regards
Bilal
features.conf
2009/1/25 Michael Stults mstu...@tds.net
## will do it.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
On 1/23/09, David @ULC ucoms2...@gmail.com wrote:
But after installing it with CD , I guess we have to change SIP file and do
few more changes ..
I am looking for those steps..
On Fri, Jan 23, 2009 at 2:55 PM, David @ULC ucoms2...@gmail.com wrote:
Anyone have properly formatted
On Sun, Jan 25, 2009 at 08:59:16PM -0200, David fire wrote:
you dont have dahdi properly installed.
did you install BOTH dahdi utils and dahdi modules
Wow, you finally realized that?
What is the output of:
uname -r
find /lib/modules -name dahdi.ko
--
Tzafrir Cohen
Anyone done anything similar before that would care to share ?
Here is a snippet of our standard ks file for automated installs:
%packages --nobase
@core
sendmail
sendmail-cf
ntp
vixie-cron
crontabs
at
logrotate
telnet
bind-utils
lsof
wget
which
unzip
man
bc
nc
sharutils
# Up till now, just
On Sun, Jan 25, 2009 at 7:55 PM, David fire ddf...@gmail.com wrote:
hi
wich soft phone do you recomend but i need this feature it must ask for
user name and password when it start.
i know xline and zoipper but they dont have that i can acomplish this
whit twinkle but i need it for Windows
63 matches
Mail list logo
