In article pine.lnx.4.64.1002261731010.11...@unicorn.drogon.net,
Gordon Henderson gordon+aster...@drogon.net wrote:
So I've been testing asterisk under LXC for a few days now and am very
happy with the results. My test server is a 1.8GHz Celeron with 256KB
cache and 512MB RAM and I have 20
On Sat, 27 Feb 2010, Tony Mountifield wrote:
In article pine.lnx.4.64.1002261731010.11...@unicorn.drogon.net,
Gordon Henderson gordon+aster...@drogon.net wrote:
So I've been testing asterisk under LXC for a few days now and am very
happy with the results. My test server is a 1.8GHz Celeron
On Fri, 26 Feb 2010, Gordon Henderson wrote:
More for fun than anything else, I've tried daisy-chaining instances
together - so 20 asterisks running on the same host, 0 calls 1, 1 calls 2,
2 - 3... 19 calls 0 - which plays music on hold.
Put a call into 0 - setup through the chain seems to
Hi,
I've just uploaded a patch here:
https://issues.asterisk.org/view.php?id=16925
This patch introduces a new parameter; congestion to both RINGNOANSWER in
queue_log and AgentRingNoAnswer AMI event, which is set to 1 if the call
failed to go through because of technical difficulties.
And it
On Thu, Feb 25, 2010 at 04:30:03PM +0100, jonas kellens wrote:
Hello list,
when installing Dahdi, the following error comes up :
You do not appear to have the sources for the 2.6.18-164.11.1.el5xen kernel
installed.
make[1]: *** [modules] Error 1
The running kernel version :
Hi, does anyone run non HWEC Sangoma PRI cards with an increased dahdi
chunk size? I tested it at 2ms and it seemed fine with no noticeable
loss in audio quality, and it reduced the interrupt processing to 50%.
Regards
Lee
--
I was surprised to find that you can not override the default voice
prompts when using the Authenticate Command. I have viewed the source and
the prompt file names are hard coded. I am developing an application that
use the Authenticate command to use one use PINs located in the Asterisk
Or, alternatively using the 's' priority...
exten = 845,1,Verbose(3, Incoming call from ${CALLERID(all)}) ; this will
be priority 1
exten = 845/12345678,n,Goto(blacklist) ; the n will make this priority 2
exten = 845/23456789,s,Goto(blacklist) ; the s will make this also priority
2
exten =
Hey All,
I want to implement a conference calling scenario.
Conference Call Procedure:User1 dial the User2. When call is connected put the
current call on Hold and dial User3. When the call is connected between User1
and User3 join the User2 in a conference room!How I can implement this
Here is where to get you start with this.
http://www.voip-info.org/wiki/view/Asterisk+n-way+call+HOWTO
-Tri
From: Faheem faheem_...@yahoo.com
To: asterisk-users@lists.digium.com
Sent: Sat, February 27, 2010 12:08:24 PM
Subject: [asterisk-users] Conference
I have figured this out and it's working fine now. Here is the key if anyone
has the same issue.
featuredigittimeout = 5000
Increase the digit timeout or you have to press the key codes quick enough in
order for Asterisk to detect the keys.
-Tri
From: Tri
Turn debug on and watch on the console to see if the you see the x-lite
extension talks to your asterisk box.
CLI core set debug
or
CLI core set verbose 99
From: Girard, Jeffrey COL MIL USA jeffrey.gir...@us.army.mil
To: asterisk-users@lists.digium.com
On Sat, 27 Feb 2010, Matthew A Kolberg wrote:
I was surprised to find that you can not override the default voice
prompts when using the Authenticate Command. I have viewed the source
and the prompt file names are hard coded. I am developing an
application that use the Authenticate
I've got an asterisk installation of 1.4.30-RC2 running, and while I can
register lines and get call setup to pass, for some reason no RTP is being
generated or received by asterisk.
Debug doesn't seem to give me too much of relevance about it, especially rtp
debug.
I had a few other small
Muhammad
It is not really your scenario but the scenario to setup a conference
call with three numbers could be to generate two call files that
points to a local channel/a context/extension that route the leg into
the conference room and have your own leg routed into the conference
room
On Sun, 2010-02-28 at 04:00 +0800, D Tucny wrote:
Or, alternatively using the 's' priority...
exten = 845,1,Verbose(3, Incoming call from ${CALLERID(all)}) ; this
will be priority 1
exten = 845/12345678,n,Goto(blacklist) ; the n will make this
priority 2
exten =
RTP is only firewall issue. Make sure that you can pass traffic from your
client to the asterisk server. If it's on the same LAN, there shouldn't be any
issue with RTP unless the Asterisk is setup with firewall to block RTP traffic
(default is from 1 - 2 upd)
Asterisk doesn't support
Hey Guys,
I am considering leasing a new server in Germany to run my Asterisk
infrastructure and I was wondering how response time would affect the
performance of the system. Right now I have a response time of around
60-70ms with my server in California. The server in Germany would have a
18 matches
Mail list logo
