On Monday 28 March 2011 14:23:25 Tilghman Lesher wrote:
On Monday 28 March 2011 07:57:10 Eric W. Davenport wrote:
alias start = calldate
alias callerid = clid
These are fine.
I was incorrect, here, and there's nobody to blame but myself. The
field is ACTUALLY named clid internally, so
On Thu, Mar 31, 2011 at 1:52 AM, Tilghman Lesher tilgh...@meg.abyt.eswrote:
I was incorrect, here, and there's nobody to blame but myself. The
field is ACTUALLY named clid internally, so when I, by default, set
ANOTHER field to the clid column, I shut out the default logic which
would have
On Wed, 30 Mar 2011, Terry Brummell wrote:
Yah, sounds simple, how do you set it up to do this? Fail2Ban was
pretty easy, if it's that easy, why was F2B even created?
It's easy for me because I read an undestand how things work, and deal
with Linux firewalling in a daily basis. Fail2ban is
On 03-31-2011 01:10, bilal ghayyad wrote:
I can not do the configuration from the web based of the Phone?
it depends on the model. 7912 has a web ui, 79[46]0 does not.
* Can I understand that working with Asterisk does not give a chance to have
IP Phones with featues assigned on the
On Wednesday 30 March 2011 14:34:29 Henrique Fernandes wrote:
exten = s,1,set(CDR(teste)=${CHANNEL(audioreadformat)})
And is not working, i thought the only diference it i would need the
colum teste in my cdr table right ?
Correct. Did you restart Asterisk after modifying the table? If you
hi,
if you only want that by any how you reachable , so you just make a simple
DIALPLAN and do your work with DIal-plan, just DIAL those 3 numbers
simuntenously, by seperating '', in that your cell number and other phone
rings simultenously , and you can pick any of them other are automatically
On 03/30/2011 08:02 PM, cajsdy wrote:
thanks. opened with wireshark and it's clearly show the format, digits.
another question: each pcap has multiple frames, each frame has digit,
volume 10, and duration. why it has more than one frame? would not it
send multiple digit each pcap?
Please go
Back to the original question, for those of you using Fail2Ban,
Does it take an unusually high amount of break-in attempts before attackers
are banned?
I have it set to 5 attempts in fail2ban but usually, the attacker is able to
make over 100 attempts before fail2ban bans them.
I've tried this
Hi Group,
Is there any information available for Asterisk 1.8 dimensioning? I googled
but couldn't find helpful data for 1.8.
I am trying to figure out hardware configuration for following features
implemented in Asterisk 1.8?
(1)100 SIP clients.
(2)ACD (Around 15 realtime queues)
(3)Call
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To
Your delay is due to the amount of time the F2B script takes to read the log
file, and due to how often it is called. I do not believe it is a realtime
event. Say, every minute it's called to read the log and act. I'm not sure of
the exact numbers, but you get the idea
From: vip
On 31 Mar 2011, at 13:52, Sebastian wrote:
http://www.downforeveryoneorjustme.com/downloads.asterisk.org
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live
I'm afraid you are incorrect, fail2ban reads the log once every second.
On Thu, Mar 31, 2011 at 8:52 AM, Terry Brummell te...@brummell.net wrote:
Your delay is due to the amount of time the F2B script takes to read the
log file, and due to how often it is called. I do not believe it is a
Finally, I have uncovered the mystery!
Channel terminated just at the time when it was executing SayNumber, ended
up the warning in my log!
Thanks everybody for your time on this thread.
Mohammad
On Sun, Mar 27, 2011 at 5:32 PM, Sherwood McGowan
sherwood.mcgo...@gmail.com wrote:
Oh crap,
Hi,
Does anyone know how to implement the feature in asterisk calling card when a
user has dialed the access number and during the IVR or any time during the
call, he can press ## or ** to end the current call and dial a new destination
number?
Please help and give me a step by step help.
I got something with this line.
exten= _X.,2,set(CDR(teste)=${CHANNEL(useragent)})
But only wen the first cal fail!
I wil setuo asterisk to show the log in the console.
[]'sf.rique
On Thu, Mar 31, 2011 at 6:17 AM, Tilghman Lesher tilgh...@meg.abyt.eswrote:
On Wednesday 30 March 2011
After experiencing frustration with long shipping times for the Rowetel
IP04 asterisk appliance we have decided to import the units directly
from Atcom.
If you are in the US and need a small office PBX, the IP04 and IP08 are
ideal. They offer 4 or 8 lines of FXO and FXS and both include the
Hey Danny,
Yes, modifying the dial command fixed it.
Thanks alot.
Best regards,
Bobola O. Oke
On Wed, Mar 30, 2011 at 6:03 PM, Danny Nicholas da...@debsinc.com wrote:
What does your Dial command look like? If you are using the ,r option,
Asterisk will generate it’s own ringing noise
Hi All,
I have a server running Fedora 14, kernel 2.6.31.14, Asterisk
1.6.2.17.2 and Dahdi 2.4.1.
I have the wctdm24xxp+ loaded with a Wildcard TDM800P with 8 FXO ports
When a call is placed extension to extension, there is no
problem... When an extension is used to dial out, the
Yes, I see in the log that most of these attacks only last 2 seconds before
fail2ban bans them
On Thu, Mar 31, 2011 at 11:13 AM, Warren Selby wcse...@selbytech.comwrote:
On Thu, Mar 31, 2011 at 7:17 AM, vip killa vipki...@gmail.com wrote:
Back to the original question, for those of you using
From: vip killa
Sent: Thu 3/31/2011 8:17 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] asterisk and fail2ban
Back to the original question, for those of you using Fail2Ban,
Does it take an unusually high amount of break-in attempts before
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of JR Richardson
Sent: Thursday, March 31, 2011 10:43 AM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] asterisk and fail2ban
From: vip killa
On Thu, Mar 31, 2011 at 10:42:52AM -0500, JR Richardson wrote:
I have F2B set to ban after 1 attempt. The most I have seen in the
logs is 4-5 attemps before ban is applied. I am calling scripts that
apply the ban to a cisco access-list, so there is script/telnet/config
delay but it is very
Good Morning,
I agree I commented the lines and now everything works.
Thanks for your quick work.
Eric
--
Eric W. Davenport
Cert-In Software Systems, Inc.
P.O. Box 346
Bakersville, NC 28705
800-873-0110
ewdavenp...@certin.com
www.certin.com
--
Because some users have requested transfer beep confirmations I've
switched our phones over to using the asterisk transfer feature instead
of the built in transfer functions of the phones. While testing it was
working fine, but I changed something in features.conf and suddenly any
time I hit
Found something now! i need first to set the CDR and after make the Dial
Like this.
[default]
exten= _X.,1,set(CDR(teste)=${CHANNEL(useragent)})
exten= _X.,2,Dial(SIP/${EXTEN})
Like this, this would work!!
Now i have a question, if i do not use EXTEN and add an entry for each
number like this
You are a bad person! ;-)
CF
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Tzafrir Cohen
Sent: Thursday, March 31, 2011 10:53 AM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] asterisk
What you say...Hose (hose+aster...@bluemaggottowel.com):
Because some users have requested transfer beep confirmations I've
switched our phones over to using the asterisk transfer feature instead
of the built in transfer functions of the phones. While testing it was
working fine, but I
I have F2B set to ban after 1 attempt. The most I have seen in the
logs is 4-5 attemps before ban is applied. I am calling scripts that
apply the ban to a cisco access-list, so there is script/telnet/config
delay but it is very minimal and works very well.
So I forge one SIP packet and I
Back to the original question, for those of you using Fail2Ban,
Does it take an unusually high amount of break-in attempts before
attackers are banned?
I have it set to 5 attempts in fail2ban but usually, the attacker is able
to make over 100 attempts before fail2ban bans them.
I've tried
Do NOT copy me on replies. I do NOT need two copies of your message.
On Thursday 31 March 2011 12:08:53 Henrique Fernandes wrote:
Found something now! i need first to set the CDR and after make the Dial
Like this.
[default]
exten= _X.,1,set(CDR(teste)=${CHANNEL(useragent)})
exten=
Gordon Henderson wrote:
On Wed, 30 Mar 2011, Terry Brummell wrote:
Yah, sounds simple, how do you set it up to do this? Fail2Ban was
pretty easy, if it's that easy, why was F2B even created?
It's easy for me because I read an undestand how things work, and deal
with Linux firewalling in a
On Thu, 2011-03-31 at 21:40 +0200, Michelle Konzack wrote:
Hello *,
I have an All-In-One intranet server samba3 and usualy a seperated
router as default gateway, which connect me using HSPA to the internet
Now I have installed an Huawai K3765 on my samba3, installed pppd +
On 03/30/2011 01:32 PM, SebA wrote:
So, I've compiled and installed libpri-1.4.11.5,
dahdi-linux-complete-2.4.1+2.4.1 and asterisk-1.6.2.17.1, but chan_dahdi
is not getting built. If I do a make menuselect in asterisk I see it
listed with XXX, meaning that dependencies are not met.
XXX
On 3/31/2011 3:05 PM, Michelle Konzack wrote:
Hello Hans Witvliet,
Am 2011-03-31 22:24:50, hacktest Du folgendes herunter:
Hi Michelle,
Perhaps i'm not understanding your question correctly.
From what i read, i seems that you got your huawei working correctly as
an umts/hspa-modem, But now
On 03/30/2011 01:32 PM, SebA wrote:
So, I've compiled and installed libpri-1.4.11.5,
dahdi-linux-complete-2.4.1+2.4.1 and asterisk-1.6.2.17.1, but chan_dahdi
is not getting built. If I do a make menuselect in asterisk I see it
listed with XXX, meaning that dependencies are not met.
XXX
Run pre requirement check script I don't know the name but it's
located inside asterisk source dir inside contrib
I had same issue and has been fixed by that.
--
Sent from my iPhone
On Mar 31, 2011, at 5:47 PM, Kevin P. Fleming kpflem...@digium.com
wrote:
On 03/30/2011 01:32 PM, SebA
You need a separate Huawei USB stick to do the connection with asterisk.
Your K3765 should work with asterisk via chan_datacard.
http://wiki.e1550.mobi/doku.php?id=requirements
I have just made my K3715 works very well with asterisk.
CK
On Fri, Apr 1, 2011 at 5:45 AM, Alejandro Kauffmann
Read your message left by Yawar Hadi before it gets deleted!
To read your message, follow this link:
http://eu1.badoo.com/0164349117/in/VeFCEpNExPE/?lang_id=3
Some more patiently waiting folks:
Mickael (Liège, Belgium)
yasmin (Tunisi, Tunisia)
Abdelghani (Algiers, Algeria)
Pollox (Valencia,
39 matches
Mail list logo