But Asterisk doesn't send ANY notification regarding change of state (like
ringing) unless call-limit is 1. In my opinion, ringing status (and probably
several others) shouldn't take into consideration at what point a device is
considered as busy.
This worked fine in 1.4 (we skipped 1.6) and
Am 05.12.2012 08:48, schrieb Vieri:
Hi,
I'm trying to call out from a SIP extension to an
outbound destination via a PRI E1 (Digium B410P).
Please take a look at the PRI debug below.
# cat /etc/dahdi/system.conf
# Digium Wildcard TDM400P REV I (WCTDM/4)
fxsks=1
On 12/06/2012 10:21 AM, A J Stiles wrote:
On Wednesday 05 December 2012, Paolo De Michele wrote:
hi all,
I want have an information about ring group in asterisk (1.8.16 - centos
6.3)
I have configured skypeforasterisk for incoming call to one extension
and it works
. [stuff deleted]
hi Leandro,
thank to you for your reply but I think I shall apply the configurations
that advised me AJS
many thanks for your help
cheers
On 12/06/2012 09:13 AM, Leandro Dardini wrote:
100 extension on a row is not feasible... the queue strategy is the
only possible solution. If you check the
On Wed, Dec 5, 2012 at 2:48 AM, Vieri rentor...@yahoo.com wrote:
Hi,
I'm trying to call out from a SIP extension to an outbound destination via a
PRI E1 (Digium B410P).
Please take a look at the PRI debug below.
# cat /etc/dahdi/system.conf
# Digium Wildcard TDM400P REV I
On 12/06/2012 04:09 PM, Tim Nelson wrote:
I have a site with Polycom handsets on all the desks, mostly IP650s, some
IP550s, and some IP450s as well.
I need to update the firmware on the IP450s. However, the firmware simply won't
load.
The latest firmware (4.0.3 Rev F) supports all phones at
- Original Message -
Tim,
What version are you on? There is a specific upgrade path for pre
3.3.
Yes, that was the issue. I needed to upgrade to version 3.3 first, then upgrade
to latest 4.x was no problem. Thanks!
--Tim
--
On 12/7/2012 6:23 AM, Vieri wrote:
Am 05.12.2012 08:48, schrieb Vieri:
Hi,
I'm trying to call out from a SIP extension to an
outbound destination via a PRI E1 (Digium B410P).
Please take a look at the PRI debug below.
# cat /etc/dahdi/system.conf
# Digium Wildcard TDM400P REV
This thread confuses me. I've not worked with the Asterisk MySQL CDR, but
have worked with SQL for years.
Every table should have a primary key. Is no column identified as a PK?
If there is a PK, you will not be able to designate another column as PK.
If there is a PK, you don't need
You can also (in mysql) tag a column as unique:
alter table blah add unique(column_name);
This doesn't add a key AFAIK unless you ask it to be a key:
alter table blah add unique key(column_name);
If you will never refer to a row using the auto-increment column, why
have it?
No problem
Justin Sherrill wrote:
We occasionally get a sort of feedback/echo noise on our phones
here. (Polycom IP550 / Asterisk 1.8). It lasts for about a second,
and it's described by users as 'jingle bells'.
That's very appropriate for the season. I just hope they're not
Todash Chimes. ; )
It
Anybody using Apache to proxy HTTP traffic to Asterisk HTTP? I got a
request from a developer to add some CORS headers[1], for an
application we are writing, and wanted to see if anybody else has had
success.
[1] http://enable-cors.org/
--
Paul Belanger | PolyBeacon, Inc.
Jabber:
On 12/07/2012 06:16 AM, Pan B. Christensen wrote:
But Asterisk doesn't send ANY notification regarding change of state
(like ringing) unless call-limit is 1. In my opinion, ringing status
(and probably several others) shouldn't take into consideration at what
point a device is considered as
13 matches
Mail list logo