Hello,
Trying to use g729 in pass-thru mode.
Call flow:
SIP IP Phone (G.729)--Asterisk(1.6.2.9)---SIP Trunk to ITSP(G.729)
When using G.729, call is not getting connected. Below is the extract from CLI.
== Using SIP RTP CoS mark 5
-- Executing [12127773456@default:1] AGI(SIP/100-,
Hi,
i am trying to install asterisk newer version on the Elastix machine, but
while installing the chan_sip,c module is not building while make. when i
see in make menuselect options it showing XXX -- extended , please let
me know how to enable it and make build chan_sip module.
--
Upendra
--
It depends on chan_local see if that is enabled or not.
Regards,
Qasim
On Mon, May 27, 2013 at 11:56 AM, upendra uppi...@gmail.com wrote:
Hi,
i am trying to install asterisk newer version on the Elastix machine, but
while installing the chan_sip,c module is not building while make. when i
hi,
chan_local is enabled but chan_sip is showing XXX
--
Upendra
On Mon, May 27, 2013 at 2:13 PM, qasimak...@gmail.com
qasimak...@gmail.comwrote:
It depends on chan_local see if that is enabled or not.
Regards,
Qasim
On Mon, May 27, 2013 at 11:56 AM, upendra uppi...@gmail.com wrote:
i am trying to install asterisk newer version on the Elastix
machine, but while installing the chan_sip,c module is not
building while make. when i see in make menuselect options
it showing XXX -- extended , please let me know how to
enable it and make build chan_sip module.
--
hi,
chan_local and res_crypto are building but the chan_sip is not building .
installed openssl also but still the chan_sip not building.
--
Upendra
On Mon, May 27, 2013 at 2:59 PM, Alec Davis siva...@paradise.net.nz wrote:
i am trying to install asterisk newer version on the Elastix
Show us the sip debug for a failed call.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Kamlesh Kumar
Sent: Monday, May 27, 2013 2:20 AM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] G.729
Asterisk 11.1
We have a situation where one of our incomings POTS lines will not
answer. There are 2 lines configured by the Telco as a rollover group
(rings the line that is not busy) and they feed into a Digium AEX410 on
the server. The most recent time this happened, I did a
Hello everybody,
i have two gsm line (extra channels) and i'd like to schedule the
outgoing calls with a round-robin strategy.
If all the gsm lines are busy, the call must be sent to the pri lines
with a linear strategy.
here is the dialplan:
exten = gsm,ChanIsAvail(EXTRA/r2DAHDI/g1)
same =
Hi Mitch
On 28/05/2013, at 5:14 AM, Mitch Claborn mitch...@claborn.net wrote:
Asterisk 11.1
We have a situation where one of our incomings POTS lines will not answer.
There are 2 lines configured by the Telco as a rollover group (rings the line
that is not busy) and they feed into a
10 matches
Mail list logo