unplugging PRI cables generates major alarms on ALL telecom systems...
in our lab, we do that every day and don't have to restart anything...
On Thu, 2005-12-22 at 11:51 +0100, Simone Cittadini wrote:
Yesterday I've had to unplug one cable coming from a TE410 card to plug
it in another hole,
Hello people,
i have a question concerning a quad-pri card (tor2 is the module for
this card)
i want the span to be completely shut down when alarms occur on it; i
want the span to be shut down immediately to avoid compromising the
whole box if one E1 line goes crazy and to be activated only by
tos 16 = 0x10 (lowdelay).. that part is ok, but is a workaround, NOT a
fix-up...
On Sun, 2005-06-19 at 18:48 -0400, Doug Lytle wrote:
Calin Serbanescu wrote:
static int tos=16;
I think it is tos=0x16
Doug
___
Asterisk-Users mailing
it works well on sip to me too, the problem is in chan_iax
On Mon, 2005-06-20 at 06:38 -0600, Rich Adamson wrote:
It seems that my * does not react to tos=whatever field in iax.conf. I
am using latest CVS HEAD code.
Can anybody help me with this issue?
ps:
if i go to
Hello people,
It seems that my * does not react to tos=whatever field in iax.conf. I
am using latest CVS HEAD code.
Can anybody help me with this issue?
ps:
if i go to chan_iax2.c and modify the initial definition of tos
variable, it works fine marking packets with the value specified there:
hello,
from time to time my cpu load grows up to 100% and the system becomes
unusable (calls get disconnected, quality is VERY poor, etc.)
the only solution i found so far is to restart the asterisk service,
but it's definitely not a way of solving the problem.
My * version is Asterisk
What standard does your telco send the caller-id in ? ETSI FSK,
bellcore... ?
On Wed, 2005-06-15 at 16:26 +0200, Stojan Sljivic - GDS wrote:
Hi Juan,
I have Caller Id service enabled. When I connect the line to the phone I see
the caller Id on the phone's display.
I have
which country are you in and what is your provider ?
On Wed, 2005-05-18 at 12:25 -0700, Adrian A wrote:
Does anyone have any experience with the Audiocodes MP-108 FXO
gateway? I'm looking to get one for incoming PSTN lines.
In particular, does it pass caller ID information to Asterisk?
Hello list,
i configured correctly the codes in features.conf, loaded successfully
res_features, but while in a call (any type of call including zaptel to
zaptel, zaptel to sip, sip to sip) both sides hear DTMFs and nothing
happens...
i'm i missing something?
Thanks,
Calin.
Hello,
I need some help setting up statistics per call. I need to store in a
database call quality details such as jitter, packets lost and other
informations. Is there any way to do this?
I'd really appreciate some links or any other kind of info on this.
Thanks,
Calin.
hello list,
last night i upgraded my asterisk box from 1.0.5 to 1.0.6 and my music
on hold did not work anymore.
my setup is ISDN (wct1xxp)-SIP (Audiocodes mp124) and reverse.
the system refuses to activate music on hold resource... i returned to
1.0.5 and it works fine again...
i'm i missing
Hello list,
Is it possible to implement an application that satisfies the following
scenario using agi and php?
- user picks up phone
- he wants to redirect all his calls to the cellphone
- he dials *400 for example and all the calls addressed to him are
diverted
- he comes back to office next
yes, it works great even on a very high load machine with two tormenta2
quad E1/PRI cards.
On Sat, 2005-02-26 at 03:45 +, Kanishka Somaratne wrote:
has any one implemented open 723 at
http://www.readytechnology.co.uk/open/g723.1
___
Hello list,
I need a few words about the difference between sangoma quad E1 cards
w/dsp vs. digium tormenta2 compatible cards.
Does * really make use of the dsp's on these boards(sangoma)? How many %
CPU do they each need (sangoma vs. digium)?
Unfortunatelly i do not have the sangoma cards yet,
I had the same problems with Tormenta2 card from Digium.
Same behaviour, both cards were receiving irq`s, but when spans got up,
lots of messages (Bad FCS) came up too on my asterisk console...
everything died with kernel panic in the end...
The motherboard was an Asus with dual Pentium3 933MHz,
Hello,
I had two quad-E1 Tormenta2 cards in my system and yesterday i had to
replace the CPU. I noticed the rotary switch on each card that sets the
card number or ID...
Both switches were set up on 0 and everything worked fine. Should i set
one card to 0 and the other one to 1, or... if it
Hello,
Are there any T1/E1 PCMCIA cards available on the market supported by
zaptel drivers and asterisk ?
I need to make some demos at my clients with asterisk and it's a pain to
move around with a midi-tower computer just for that.
Thanks,
Calin.
existing MySQL database for Asterisk.
Thanks,
Calin Serbanescu
IT Manager
TransTel Services
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit
unfortunatelly i have to accept their terms and rewrite caller id... but
again, i am newbie in scripting with agi and i can't find any example on
the net about this... do you have any link to such script ?
thanks
On Sun, 2005-01-30 at 20:42 +0100, Roger Schreiter wrote:
Calin Serbanescu schrieb
thanks very much, i'll try that... that is, no sleep until it's ready :)
On Sun, 2005-01-30 at 21:17 +0100, Roger Schreiter wrote:
Calin Serbanescu schrieb:
...
the net about this... do you have any link to such script ?
No, I don't have such a link.
But on the voip-wiki pages
20 matches
Mail list logo