We have one hotel using Xorcom devices. It has 1 32 port FXS bank, and 1 24
port FXS + 8 Port FXO.
It works great with all the old analog phones in the motel, over the
existing wiring.
I haven't tried it with a fax though, but modem usage is very hit and miss.
The Xorcom guys are looking into
is an FXS port
Thanks,
Col
- Original Message -
From: Tzafrir Cohen [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Sent: Friday, August 22, 2008 6:56 PM
Subject: Re: [asterisk-users] Problem with modem data calls and xorcom
astribanks
On Fri, Aug 22, 2008 at 03:12:41PM +1000, Col
Hello all,
I have a system at a motel that is mostly analog phones with 2 32 port
astribanks.
I am having problems getting a modem data call to connect.
There are many travelling salesmen that require this functionality to work
to dial direct into their company systems.
I am using Asterisk
- Original Message -
From: Joseph L. Casale [EMAIL PROTECTED]
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
asterisk-users@lists.digium.com
Sent: Tuesday, June 10, 2008 10:47 AM
Subject: Re: [asterisk-users] Interoffice phone setup
I've seen this behaviour from Asterisk
If I understand right, your problem is that the power supply won't turn on ?
ATX power supplies can be told to turn on by jumpering 2 pins on the
motherboard power connector. From memory its the Green wire and one of the
black wires, I usually use the next one inwards. Pinouts for the connector
Hello,
I have a system in a motel that needs call billing data output through its
serial port so the existing motel management software can collect the call
billing info.
Is there any easy way to redirect the data that goes into the
cdr_custom/Master.csv file to go out the serial port ?
The
Hello again,
I can copy the file out the serial port by doing this:
rename Master.csv out1.csv
cat out1.csv /dev/ttyS0
If I build a script to do this every 10 or 20 seconds via cron I think it
will work fine, unless someone has a better way.
Cheers,
Col
- Original Message -
From: Col
@lists.digium.com
Sent: Saturday, April 12, 2008 9:36 PM
Subject: Re: [asterisk-users] cdr_custom outout to serial port
How about a tail -f on Master.csv ?
Then you will have everything realtime and you will not need a cronjob.
Zoa
Col Ferguson wrote:
Hello again,
I can copy the file out
I have been working on a system where sometimes the users get a horrible
screeching noise that gets louder, typically as a call is hung up.
The system has 2 analog astribank channels with 8 FXO and 56 FXS ports, and
2 SIP phones, Asterisk 1.4.18, Zaptel 1.4.9.2. It is using the oslec echo
- Original Message -
From: Steve Totaro [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Monday, April 07, 2008 10:28 PM
Subject: Re: [asterisk-users] screeching noise on zap channels
On Mon, Apr 7, 2008 at 8:17 AM, Col
, Col Ferguson wrote:
I have been working on a system where sometimes the users get a horrible
screeching noise that gets louder, typically as a call is hung up.
The system has 2 analog astribank channels with 8 FXO and 56 FXS ports,
and
2 SIP phones, Asterisk 1.4.18, Zaptel 1.4.9.2
11 matches
Mail list logo
