Hi
I have a Zyxel 2000W wifi phone, setup is easy and quick to perform. However
I have found the range less that satisfactory. I have a Cisco 1200 AP and
our wireless laptop devices can acccess the network fine, however the Zyxel
is pretty rubbish. For example I can be 5 metres away with only a
10:21
To: [EMAIL PROTECTED]; Asterisk Users Mailing List -
Non-Commercial Discussion
Subject: Re: [Asterisk-Users] WiFi Phones
wireless generally struggles with brick walls.
- Original Message -
From: Matt Love [EMAIL PROTECTED]
To: 'Asterisk Users Mailing List - Non-Commercial Discussion
Hi,
Is there a way to reduce the ring time to answer on the Asterisk @ Home
platform.
Currently it sometimes takes 3 UK Rings before asterisk picks up the call.
In AMP I have Setup-General Settings- Extension of Fax machine DISABLED
Below is my ZAPATA.conf file if this is any help.
Thanks in
Hi,
Yes, I had the same. Incoming calls were fine it was just when I made
outgoing calls the line would sometimes hang and I would get all circuits
are busy.
Putting a butt (test) phone on the line in parallel indicated the line had
dropped back to an on hook state, although asterisk wouldn't use
Hello,
I have [EMAIL PROTECTED] 1.5 installed and all is working fine for
incoming calls and sometimes outgoing calls. Installed in the box is a digium
TDM04B (4xFXO Ports)
setup as ZAP1 to
ZAP4. I have incoming calls coming in on lines 1-4 in that order and
outgoing calls prefering ZAP4
Hi Hatton,
Could you provide some examples of the config files for this. Im trying to
do the same. Im confused with some of the other posts (its not hard to
confuse me!) Some say its just the zapata and some say theres way more to
it.
I have 4 FXO ports, 2 on one number and 2 on another and want
Hi,
Can someone point me
in the direction of getting the voicemail - Email to work on [EMAIL PROTECTED] 1.5
Ive put in the email
addresses of voicemail users eg [EMAIL PROTECTED] But i cant find where
to set the email server up. we have a company email server an idealy i would
like to
Hi,
I have 4 analogue
PSTN lines on my legacy PBX, 2 lines on one number in a rollover group ZAP1
ZAP2and 2 lines on another number ZAP3 ZAP4.
Is it possible to
have a group of phones ring when lines ZAP1 2 are called and a DIFFERENT
set of extensions ring when ZAP3 or ZAP4 receive a
