Dear All
The setup is te110p with an 8 channels PRI to make and receive all calls.
SIP phones throughout the company.
TDM400p with 4 FXS modules to send/receive faxes and make credit card
transactions.
I have an analogue phone on the tdm400p for testing.
I can receive calls to the exten. There
Dear All
I have a problem with a TDM400 card with 4 x FXS modules.
The card carries extensions only and there are no incoming lines.
I can make a call to the extension on this card with no problems.
However, when I try and call out I just get a busy signal.
I also get an error message (as shown
Dear All
I have a problem with a TDM400 card with 4 x FXS modules.
The card carries extensions only and there are no incoming lines.
I can make a call to the extension on this card with no problems.
However, when I try and call a different extension I just get a busy signal.
I also get an error
Dear users.
My current setup uses a euroISDN E1 with 8 cahnnels for incoming and outgoing
calls from a digium te110p.
Currently all phones use SIP.
However, I need to add some faxes lines and some POS credit card machines.
These will require POTS lines with a fixed DDI.
I have purchased the
@lists.digium.com
Sent: Thursday, June 14, 2007 11:22 AM
Subject: Re: [asterisk-users] TDM400p and te110p configuration.
On Thu, Jun 14, 2007 at 09:45:01AM +0100, Matt Scott wrote:
Dear users.
My current setup uses a euroISDN E1 with 8 cahnnels for incoming and
outgoing calls from a digium
Dear all.
I have what appears to be a configuration error but I cannot for the life of me
see what it is. (I am a newbie)
I have searched the wikki and google etc but still none the wiser. Any help
would be very gratefully received.
Problem:
Unable to make outgoing calls via E1 euroISDN Digium
Hi all.
I am unable to answer calls coming into asterisk
over PSTN. (UK)I want to have a call answered by my TDM400P/FXO module and
forwarded to a sip phone.
When I make a call from the PSTN to the BT line
installed on my FXO module the sip phone rings however, when i pick up
thecall using
Dear all.
I have a tdm400p with an FXO module in slot 4 and
an FXS module in slot 1.
I have not configured the FXS port in an attempt to
keep things simple.
The problem is that when I call the POTS number
(assigned by phone company) asterisk is seeing the call but then not doing
anything
- Original Message -
From: Peter Bowyer [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Wednesday, May 18, 2005 8:25 AM
Subject: Re: [Asterisk-Users] multiple sip accounts from same sip registrar
On 17/05/05, Matt Scott [EMAIL
Dear all,
I have an asterisk sip issue which I don't believe
is unique.
I use a registrar (sipgate.co.uk) where I have 3
different accounts.
These accounts provide me with three seperate local
phone numbers which allow me to allocate them to seperate users.
By using just one of these
- Original Message -
From:
Matt Scott
To: asterisk-users@lists.digium.com
Sent: Tuesday, May 17, 2005 5:59 PM
Subject: multiple sip accounts from same
sip registrar
Dear all,
I have an asterisk sip issue which I don't
believe is unique.
I use
11 matches
Mail list logo