[asterisk-users] Logging to /dev/ttyS0

Hi, I have /dev/ttyS0 set up with a serial cable so a call centre system can pick up CallerID. How can I redirect the log output of asterisk to /dev/ttyS0 or /dev/console? Many thanks, Neil safeharbour IT Ltd Your IT Department fax: 0845 867 2891 mob: 07812 114784 voip: [EMAIL PROTECTED]

[asterisk-users] Starting Asterisk in vvvvvvvvvvverbose mode

Hi, how do I get Asterisk to start in very verbose mode every time it boots? Neil safeharbour IT Ltd Your IT Department fax: 0845 867 2891 mob: 07812 114784 voip: [EMAIL PROTECTED] email: mailto:[EMAIL PROTECTED] [EMAIL PROTECTED] web: http://www.safeharbourit.co.uk/ www.safeharbourit.co.uk

RE: [asterisk-users] Asterisk and UK ISDN 30

: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Kennedy Sent: 24 November 2006 23:57 To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] Asterisk and UK ISDN 30 On Fri, Nov 24, 2006 at 11:51:41PM -, Neil Tancock wrote: Anyone know if Asterisk will work with ISDN

[asterisk-users] Asterisk and UK ISDN 30

Anyone know if Asterisk will work with ISDN 30 and what sort of device I'll need to connect it? neil safeharbour IT Ltd Your IT Department ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or

[asterisk-users] Can't change Zaptel driver from FCC mode

Hi, I'm using Asterisk with a Digium TDM10B FXO card and it's driving me nuts. I'm based in the UK and have echo problems and need to switch the driver from FCC mode to UK mode. I've tried modprobe zaptel and modprobe wctdm opermode=UK and the ztcfg. I get no error messages but when I reboot it

RE: [asterisk-users] Can't change Zaptel driver from FCC mode

, Neil Tancock wrote: Hi, I'm using Asterisk with a Digium TDM10B FXO card and it's driving me nuts. I'm based in the UK and have echo problems and need to switch the driver from FCC mode to UK mode. I've tried modprobe zaptel and modprobe wctdm opermode=UK and the ztcfg. I get no error

RE: [asterisk-users] Can't change Zaptel driver from FCC mode

:53PM +0100, Neil Tancock wrote: Hi Tzafrir, If I do a cat of /sys/module/wctdm/opermode I get: FCC I thought I could change it here No point in changing it there. It is used when the module is initialized (and should be a read-only parameter, hint-hint) and then do a ztcfg ztcfg

[asterisk-users] IAX Terminal

Hi, can anyone recommend a good IAX phone for use with Asterisk? I'm looking for a NAT-friendly solution and my SIP phones are good but not dependable. Neil ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To