Hello Muhammad
BRI card configured in TE mode .
here is zapata.conf
switchtype = euroisdn
signalling = bri_net_ptmp
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
Oops, SOrry my last mail slipped ...
If your card is int TE mode (connected to your operator) configure the
signalling in zapata.conf as pri_cpe_ptmp (net_ptmp is for card in NT
mode)
_
Von: Muhammad Talha [mailto:[EMAIL PROTECTED]
Gesendet: Montag, 20. Dezember 2004
Hello list
We're trying to get a HFC card running in NT mode. Zaphfc loads fine as
module and ztcfg -v is run only once per reboot. Cabling is ok, the
ISDN-TE gets ist power fine. The HFC card does not share any interupts.
After the TE picks up the console (pri debug enabled) shows:
Nov 21
Hello Christiaan
I have several * boxes running with AVM cards (Fritzcard, C2 and
Fritz-USB). Of course in TE mode interfacing with the operator.
Installation of card on SuSe is straightforward, other dists (including
debian, which we use) needs a little tweaking. * users chan_capi to
Hello Tim
I'm struggling to get a HFC card running in NT mode. It seems to work
for a short period but then stops. The messages on the asterisk console
mentione something about event 6.
Is the zaphfc module enough to be loaded or must hisax also be loaded in
order to work?
Best regards,
Hello Tim
I've found a bug in the new code that could have caused this problem.
Try downloading and installing from
http://www.virbiage.com/firefly/download/firefly-thirdparty.ex
e again;
this time you should get build 3941, which should solve the
problem you
ran into. Please let me
Hi Tim
- responds to POKE messages; qualify=yes should now work
in iax.conf
Thanks for implementig this.
I installed 1.9.6 and qualify poked the client correctly.
During a phone call, originated from firefly, the call dropped due to
firefly crashing. The message on the console was the
HI Matt
I'm unsure about Fedore, but hav several instances of * running with
different avm cards running find (usb, fritz and c2) on debian stable
(woody).
The tricky part is to find the correct verion of the avm drivers to load
(since they are compiled for suse.
Does capiinfo show anything?
Hello
Drop the third line.
exten = 31xxx,3,Goto(31xxx,1)
31xxx,2,Dial(IAX2/[EMAIL PROTECTED]CAPI/31xxx:079xxx,120,mgh)
[context-Follow_me]
exten = 31xxx,1,Wait(1)
exten =
31xxx,2,Dial(IAX2/[EMAIL PROTECTED]CAPI/31xxx:079xxx,120,mgh)
exten =
Hello *-users
I'm trying to implement a simple follow me solution. The case is that I
would like to be able to pickup the incoming call on a line (whatever)
hang it up and repick it on another line (mobile)
Currently i'm using the following to accomplish this:
exten = 31xxx,1,Wait(1)
exten
Hello Brian
How about simply doing a blind transfer to your cellphone (or other
phone...)? You could setup a special extension, say extension *1, to
dial your cellphone so you don't have to dial the whole
number every time.
Thank you for the reply, the log extension is really a DDI, not
11 matches
Mail list logo