I have the following dialplan (segment) that isn't working as I expected
it to:
exten = s,n,Dial(Zap/1SIP/202SIP/203,18)
exten = s,n,Dial(Zap/1SIP/201SIP/202SIP/203,42)
The plan was to have SIP/201 added to the group of ringing phones after
3 or so rings. What ends up happening, though, is
Yuan LIU wrote:
exten = s,n,Dial(Zap/1SIP/202SIP/203,18)
exten = s,n,Dial(Zap/1SIP/201SIP/202SIP/203,42)
Interestingly, although the Asterisk Manual (by Mark Spencer and so
on) contains an almost identical sample plan fragment, in reality, it
seems to need a Wait() in between to reset the
Christopher Aloi wrote:
I would like to use a visual park function if possible, here's how I
see it working
What you want is called BLF with Metermaid. There was a question about
it on this list less than a week ago, but with no response.
Metermaid was a patch for the 1.2.x series,
Scott Walde wrote:
This page:
http://voip-info.org/wiki/view/480i+Busy+lamp+field+%27BLF%27+support
Sorry, I sent the wrong link... That page was just for regular BLF. The
Metermaid bit is on this page, about half way down:
http://voip-info.org/wiki/view/Asterisk+and+Aastra+Phones
ttyl
Leo Ann Boon wrote:
Are you doing a blind transfer or attended transfer? I'm assuming
you're using the phone's transfer button. You may need to press
transfer a second time to complete the transfer.
Attended. I have decided my problem is with transfer, not specifically
parking. I just
Scott Walde wrote:
I have even caused Asterisk to crash a couple of times. I'm beginning
to wonder if I'm hitting a bug in 1.4. I've noticed a few other
people have got the notify answer... message. I'm going to try
downgrading to 1.2.14 to see if it works there.
In the meantime
Hi. I've spent the past four hours on this... if it's a FAQ, I apologize.
I am setting up a system with Asterisk 1.4, a TDM400 (3 FXO, 1 FXS) and
3 Aastra 480i CT phones. (1.4.1 firmware.) I have the system mostly
working, but am still having trouble with a couple features. This email
