Hello, I have a Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] card which seems to work on 1 machine but not on another. It SHOULD load this driver: >dahdi_hardware -v pci:0000:00:00.0 wcb4xxp+ 1397:08b4 Junghanns QuadBRI ISDN card
Instead of: >dahdi_hardware -v pci:0000:00:00.0 qozap- 1397:08b4 Generic Cologne ISDN card There is no qozap modul in lib/modules but I tried to blacklist it anyway. The consequences that the card is not working in the second machine with the same dahdi config/kernel: Sarting background readahead: [ OK ] Checking for hardware changes [ OK ] Starting dahdi: Loading DAHDI hardware modules: wct4xxp: [ OK ] wcb4xxp: [ OK ] No hardware timing source found in /proc/dahdi, loading dahdi_dummy Running dahdi_cfg: DAHDI_SPANCONFIG failed on span 1: No such device or address (6) [FAILED] [FAILED] lspci ===== 0:00.0 Non-VGA unclassified device: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: I/O ports at 4000 [disabled] [size=8] Region 1: Memory at e0200000 (32-bit, non-prefetchable) [disabled] [size=4K] lsmod ===== Module Size Used by bluetooth 53925 2 ipv6 267617 19 xfrm_nalgo 13381 1 ipv6 crypto_api 12609 1 xfrm_nalgo autofs4 29253 3 i2c_dev 12613 0 i2c_core 23745 1 i2c_dev lockd 63209 0 sunrpc 145533 2 lockd wcb4xxp 76708 0 wct4xxp 348896 0 dahdi 196296 4 wcb4xxp,wct4xxp crc_ccitt 6337 1 dahdi loop 18889 0 dm_mirror 24521 0 dm_multipath 24909 0 scsi_dh 11713 1 dm_multipath scsi_mod 142485 1 scsi_dh parport_pc 29157 0 lp 15849 0 parport 37641 2 parport_pc,lp pcspkr 7105 0 xennet 29769 0 [permanent] dm_raid45 67273 0 dm_message 6977 1 dm_raid45 dm_region_hash 15809 1 dm_raid45 dm_log 14657 3 dm_mirror,dm_raid45,dm_region_hash dm_mod 63225 4 dm_mirror,dm_multipath,dm_raid45,dm_log dm_mem_cache 9921 1 dm_raid45 xenblk 20149 3 ext3 124873 2 jbd 57065 1 ext3 uhci_hcd 25677 0 ohci_hcd 24937 0 ehci_hcd 34253 0 /etc/init.d/dahdi stop Unloading DAHDI hardware modules: ERROR: Module dahdi is in use error + /etc/init.d/dahdi start Loading DAHDI hardware modules: wct4xxp: [ OK ] wcb4xxp: [ OK ] No hardware timing source found in /proc/dahdi, loading dahdi_dummy Running dahdi_cfg: DAHDI_SPANCONFIG failed on span 1: No such device or address (6) [FAILED] /usr/sbin/dahdi_cfg -vvvvvvvv DAHDI Tools Version - 2.3.0 DAHDI Version: 2.3.0.1 Echo Canceller(s): Configuration ====================== SPAN 1: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 2: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 3: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 4: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 03) Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04) Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05) Channel 06: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 06) Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07) Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08) Channel 09: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 09) Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10) Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11) Channel 12: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 12) 12 channels to configure. DAHDI_SPANCONFIG failed on span 1: No such device or address (6) Putting the card to other slot doesn't help. That would be nice if some of the developers of this hardware would be around here. Thanks! -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users