Am I the only one using the GXP2000 expansion module?
Thanks,
Zoilo.
Zoilo Gomez wrote:
Today a 56-button expansion module for the GXP2000 came in.
When I program the buttons+leds on the expansion module for BLF, then
speed-dial works fine: when I press the button the programmed ext
Today a 56-button expansion module for the GXP2000 came in.
When I program the buttons+leds on the expansion module for BLF, then
speed-dial works fine: when I press the button the programmed ext number
is called properly.
However the LEDs are always off: neither green nor red They are
on the B410P.
I am confused; can anyone enlighten me?
Thank you!
Z.
==
Zoilo Gomez wrote:
We have recently purchased a B410P Digium 4* ISDN-2 card with hardware
EC.
On the same server, I also have a regular Digium 4-channel PSTN-card
(TDM410P ?), used to interface to some analog
We have recently purchased a B410P Digium 4* ISDN-2 card with hardware EC.
On the same server, I also have a regular Digium 4-channel PSTN-card
(TDM410P ?), used to interface to some analog devices, a.o. 2 fax machines.
For faxing, EC needs to be off (or so I understand from the archives).
We are using a couple of Grandstream GXP2000 SIP-phones with Asterisk.
In our dial-plan, we have implemented a list of short numbers in
extensions.conf, like:
exten = 1234,1,Dial(Zap/0987654321)
So when I pickup the SIP-phone, and I dial 1234, the system dials
0987654321 and connects me to
We are using Sirrix (http://www.sirrix.com).
4* BRI for app. € 550.
Works fine; has echo cancellation as well.
Cosmin Prund wrote:
Hello everyone.
I need a BRI ISDN card that works in Romania. I already have one of
the Cologne HFC-S PCI cards and it doesn't work right, it's junk. I
get
Yuan LIU wrote:
Not sure if anyone experienced the same - or if anyone ever connected
a POTS phone to the Phone jack on an X100P card.
The POTS phone rings normally when the FXO receives a call. The POTS
phone can also make outgoing calls when FXO is not holding the line.
This is desired.
