On 5/31/2010 at 9:55 AM, Mike l...@virtutel.ca wrote:
See bindaddr here:
http://www.voip-info.org/wiki/view/Asterisk+config+sip.conf
If I understand what you want to do, I believe you can do this with IP tables,
telling it to change the source IP of the outgoing packet to whatever you
I submit this is still very ambiguous. The intent to . . . deceive is, like
beauty all in the eye of the beholder, or, (or accuser) one must be able to
accurately read the mind of the perpetrator.
Also, what is inaccurate? Is that when you transmit the original ID, as is
default? Is that
. . .
What version of asterisk is it?
1.4.4
What is the output of:
cat /proc/zaptel/*
Span 1: ZTDUMMY/1 ZTDUMMY/1 (source: RTC) 1
Span 2: WCTDM/0 Wildcard TDM400P REV I Board 1
1 WCTDM/0/0 FXOKS
2 WCTDM/0/1 FXOKS
3 WCTDM/0/2 FXSKS
4
On 1/25/2009 at 6:38 AM, j...@j4computers.com j...@j4computers.com
wrote:
. . .
What version of asterisk is it?
1.4.4
What is the output of:
cat /proc/zaptel/*
Span 1: ZTDUMMY/1 ZTDUMMY/1 (source: RTC) 1
Span 2: WCTDM/0 Wildcard TDM400P REV I Board 1
1 WCTDM/0
It is giving a dial tone now. I am not quite sure what fixed it.
I did remove a typo or two (gasp!) from the zapata.conf file and had to remove
the ; as there were some complaints about that.
A reboot and restart seemed to . . . oh, wait, I also swapped the board's power
connector for
Suggestions for coming up to speed on simple dial plan. I have not done them
in at least a year and my backup files seem not to have survived various PC h/d
migrations.
I downloaded visual dialplan standard, but it refuses to connect remotely to my
* box. Even tho I can putty into it.
joe
. . .
The sample extensions.dconf has an example IVR as well as a sample
extension or two.
I don't seem to have one, in this install. And, strangely, not found one via
google, either.
joe a.
___
-- Bandwidth and Colocation Provided by
My extensions.conf file looks like this:
[line-2]
exten = s,1,Answer()
exten = s,n,Playback(is-curntly-busy)
exten = s,n,Hangup()
[line-1]
exten = s,1,Answer()
exten = s,n,Playback(is-curntly-busy)
exten = s,n,Hangup()
[phone-1]
~
~
Simple enough, but all I get is the goodby message and this
In my journey to resurrect my system and reacquaint myself with *, I am now at
the point where I can dial in and answer with an analog phone.
A good time to record greetings. So copied the appropriate (66xx stuff) from
the asterisk manual (pg 299), into the dial plan, and restarted. I am
On 1/25/2009 at 7:35 PM, Philipp Kempgen philipp.kemp...@amooma.de wrote:
j...@j4computers.com schrieb:
In my journey to resurrect my system and reacquaint myself with *, I am now
at the point where I can dial in and answer with an analog phone.
A good time to record greetings. So copied
Is Zaptel no longer available?
I returned to a long shelved project (using TDM400P and a customized, canned
version of *) and, getting to the configuration, find wctdm is not there. I
recall the authors where very enterprise oriented and focused on T1 cards.
So they left analog support out.
On 1/24/2009 at 4:20 PM, Tzafrir Cohen tzafrir.co...@xorcom.com wrote:
On Sat, Jan 24, 2009 at 02:30:24PM -0500, j...@j4computers.com wrote:
Is Zaptel no longer available?
Aparantly no longer linked from asterisk.org . Still very much available
from http://downloads.digium.com/pub/zaptel
While browsing about, found http://www.voip-info.org/wiki/view/TDM400P, where I
found this comment:
Here's a tip passed on from an old telephone engineer. Where your copper
2-wire cable approaches the building, underground, finish with several large
loops, about a metre in diameter, laid on
This is, hopefully, just a case of brain fade.
With zapata.conf and zaptel.conf in place, asterisk loaded, no dial plan and
all LEDS on the card lit, I get no dial tone, plugging an analog phone into
ports 1 or 2, only a buzz and click.
zaptel.conf -
defaultzone=us
loadzone=us
fxoks=1,2
Was messing with a polycom 501 and changed the IP from dhcp to static. Working
with a user remotely. Now, the user says the phone does not show anything on
the LCD and does not respond to any buttons.
When rebooting, there is text shown as it proceeds. ??
Is there a way to reset this to a
15 matches
Mail list logo
