Hy,
I'm working with asterisk 1.2.4 and zaptel 1.2.4
With these version an the options in zapata.conf:
answeronpolarityswitch=yes
hanguponpolarityswitch=yes
I don't detect polarityswitch. When asterisk reloads I see in CLI:
May 10 00:44:27 WARNING[14639]: chan_zap.c:10876 setup_zap: Ignoring
hello
I have an asterisk server with a public IP address and a nat address
like alias. I have 20 sip clients with private IP address. I don't Know
why, sometimes, when I try to call between 2 phones, y see the next
menssage in the astersk console:
Can't find address for host 'XX'
What could
Hello,
Has anyone Knowledge about softphone IAX for pocket PC totally free?
Tkanks for all.
--
Sandra Salmerón Ntutumu[EMAIL PROTECTED]
Tlf. Analog: +34 914888405 / Móvil: 653574298
Tlf. IP desde FWD: 656212. Ext: 10 / Tel. IP desde EHAS: 010010
Fundación EHAS: Enlace Hispanoamericano de
Hy,
I'm writing from Spain.
I have the 1.2.4 asterisk version and 1.2.3 zaptel version. I've heart
that this asterisk's version detects correctly de hang up of PSTN, but
in my case this thing doesn't happen.
Moreover, my asterisk sends the next messages in the CLI:
Feb 21 15:03:13
Hy,
I would want to test the FXO and FXS channels of a TDM400p with the
asterisk. For example, when I want to Know if a sip peers is correctly
register, I use ChanisAvail, but if a module FXS hasn't a phone
connected, How could I Know it?.
Note, that I don't want to Know if the channel ZAP
Hello everybody,
I'm a new user of * and I just bought a Sipura SPA-3000 to make a home voip
installation.
I actually have a problem when a PSTN user calls and hangs up. The
disconnect tone is not
detected by the SPA, the the call continues and, for example, leaves an
empty message on
the
Where can I find this information?
Faris Raouf wrote:
makevuy wrote:
Hello everybody,
I'm a new user of * and I just bought a Sipura SPA-3000 to make a
home voip
installation.
I actually have a problem when a PSTN user calls and hangs up. The
disconnect tone is not
detected by the SPA
---BeginMessage---
Hy,
I've bought a swissvoice IP10s. I've configurated asterisk for a peer
and user with this telephone. The telephone is registered correctly in
asterisk but I can't do call with the phone. I have read that the
principal reason for this problem is the firmware. I don't
Hy,
I have a network with WIFI communication and VHF/ HF channels.
I have integrated asterisk in the network using SIP, ZAP and IAX2
channels for WIFI communications, but I don't Know How I could integrate
the VHF/ HF channels.
I have heard speaking about app_rpt project, but I don't Know
and your HF rig. This solution
is currently being used to provied phone services from a few Red Cross
shelters to the ARC HQ in Montgomery, AL. It works well.
Mark, KC2ENI
makevuy wrote:
Hy,
I have a network with WIFI communication and VHF/ HF channels.
I have integrated asterisk in the network
10 matches
Mail list logo