Hi,
I'm trying to get Asterisk working with the AVM B1 card. I've tried every
instruction set I can find, but to no avail.
I think I'm getting mixed up as to what Zaptel/CAPI configuration to use.
If someone is currently using one of these cards, would it be possible to
mail me a few bits of
Steve Foy schrieb:
Hi,
I'm trying to get Asterisk working with the AVM B1 card. I've tried every
instruction set I can find, but to no avail.
You should use the chan_capi or chan_capi-cm. I used to use an old B1
ISA card, which worked without much trouble, after I got the CAPI itself
On a SuSE 9.1 installation I have severe problems using asterisk
with the active AVM B1. Just making some outgoing call works without
problems, but if both isdn channels are used asterisk or the
complete server may hang or start showing very strange behavior.
It might not even be possible to
Dont use modprobe, use capiinit start
Doing that :-)
Get latest Firmware from:
ftp://ftp.in-berlin.de/pub/capi4linux/firmware/b1/3-11-03/
Done that now. I've also put this link into the wiki.
With some debugging statements I found out that it hangs right here
in chan_capi.c:
Hi !
I've fetched a spare AVM B1 card from the cellar, and installed it. After
modprobe b1pci I did capiinit and capiinit moaned about a missing
t1.b4.
So I search the web and found one at
http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the
controller, I finally see
Hallo Holger Schurig
On Mon, 7 Jun 2004 17:08:53 +0200 you wrote:
Hi !
I've fetched a spare AVM B1 card from the cellar, and installed it.
After modprobe b1pci I did capiinit and capiinit moaned about a
missing t1.b4.
Dont use modprobe, use capiinit start !
Configure the
Hi,
i want forward a call witch is comming over isdn (avm b1 witch i have) out to isdn
(same card 2. b channel).
The call is comming (one b channel open one is free) the forwarding is processed (snom
200) all seems correctly.
Then the message that the b channels all busy, but so is it not.