Hello,
I have recently a practical with students about Asterisk and MGCP, I m
used to SIP and asterisk concepts, but I d like to know if someone has
some experience or success story about Centrex features with MGCP (as
far I know it s the most used protocol for centrex).
I' d like to show the
Hi all,
I'm having troubles with the MGCP canreinvite option.
I have two eyep media and Asterisk on the same network, same codecs, the
option line canreinvite=yes properly set in the mgcp.conf file...
but it won't do.
Any idea anyone? ___
2006/4/20, Nicolas TOUSSAINT [EMAIL PROTECTED]:
I'm having troubles with the MGCP canreinvite option.
I have two eyep media and Asterisk on the same network, same codecs, the
option line canreinvite=yes properly set in the mgcp.conf file... but it
won't do.
Any idea anyone?
I had many
Hello
I have a Vood vrg 121 (mgcp adapter) that I'm trying to register to my Asterisk but it doesnt work at all.
I have no earlier experience using mgcp devices I have just been using sip phones so dont be to hard ;-)
1) Do I have to do anything special to activate mgcp functionality in * or is
d get them on
Monday.
Thanks
Leonardo
- Original Message -
From:
Duane
Cox
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Sent: Saturday, November 27, 2004 2:10
AM
Subject: Re: [Asterisk-Users] Asterisk+
MGCP
There are mgcp examples in
AM
Subject: Re: [Asterisk-Users] Asterisk+ MGCP
There are mgcp examples in configs/mgcp.conf.sample in the source dir.
What do you mean by ...I found some problems with the MGCP
messages...
You have to be more specific than that if you would like help on the
topic.
Duane Cox
- Original
Hi,
I have the following situation: I've installed
Asterisk at Machine 1 (M1 - IP: 192.168.1.145) and X-Lite
(X_lite-Xten-Win32-1103m.exe from www.xten.com) at Machine 2 (M2 - IP:
192.168.1.100) and Machine 3 (M3 - IP: 192.168.1.200).
I need to catch the SIP and MGCP messages that will
Leonardo J.
Tramontina
To: [EMAIL PROTECTED]
Sent: Friday, November 26, 2004 7:32
PM
Subject: [Asterisk-Users] Asterisk+
MGCP
Hi,
I have the following situation: I've installed
Asterisk at Machine 1 (M1 - IP: 192.168.1.145) and X-Lite
(X_lite-Xten-Win32-1103
Hi
I have a Cisco 8 port E1 gateway module (x6608) in a Cisco 6509 Chassis. I
would like if possible to configure Asterisk to use this using MGCP
Anybody tried this before?
Any sample config?
Hints or tips?
Thanx in advance.
Chris Bradshaw.
] On Behalf Of Chris
Bshaw
Sent: dinsdag 26 oktober 2004 20:03
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Asterisk + MGCP + Cisco E1 gateway
Hi
I have a Cisco 8 port E1 gateway module (x6608) in a Cisco 6509 Chassis.
I
would like if possible to configure Asterisk to use this using MGCP
Chris Bshaw wrote:
Hi
I have a Cisco 8 port E1 gateway module (x6608) in a Cisco 6509
Chassis. I would like if possible to configure Asterisk to use this
using MGCP
IIRC, Cisco E1 PRI MGCP gateways require a separate network socket to
relay the Q.931 signals from the gw to the call
Hi all,
We've completed asterisk 1.0.0 and patched it to work with MGCP 1.0 and
NCS 1.0, also we've registered the DPX 2203 Cable Modem with embedded MTA
and it works fine except:
- It can't detect off-hook state until I press flash in phone and,
- It wont ring when I dial from another phone
there is a cable network asterisk wiki, check it out :
http://asterisk.urtho.net/tiki-index.php
On Mon, 11 Oct 2004 17:00:33 +0200, Astrit [EMAIL PROTECTED] wrote:
Hi all,
We've completed asterisk 1.0.0 and patched it to work with MGCP 1.0 and
NCS 1.0, also we've registered the DPX
]
To: [EMAIL PROTECTED]
Sent: Monday, May 03, 2004 9:43 AM
Subject: [Asterisk-Users] Asterisk MGCP / NCS
Hi everybody,
I have a MTA from Terayon that I try to make run with Asterisk using
MGCP channel.
The device is running with MGCP 1.0 NCS 1.0
Each time Asterisk try to send a Request (Request
Hi everybody,
I have a MTA from Terayon that I try to make run with Asterisk using
MGCP channel.
The device is running with MGCP 1.0 NCS 1.0
Each time Asterisk try to send a Request (Request Notify, Audit
Endpoint) the device returns error 510 Protocol Error
Does anybody have already
Karl Putland wrote:
On Sat, 2003-12-20 at 03:22, Senad Jordanovic wrote:
Hi,
I am trying to figure out if * can register as a client on a remote
MGCP service. Just like SIP and other protocols Do. Anyone tried
this?
No I don't believe it can. The MGCP implementation in Asterisk is a
Hi,
I am trying to figure out if * can register as a client on a remote MGCP
service. Just like SIP and other protocols
Do. Anyone tried this?
Ta
SJ
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
On Sat, 2003-12-20 at 03:22, Senad Jordanovic wrote:
Hi,
I am trying to figure out if * can register as a client on a remote MGCP
service. Just like SIP and other protocols
Do. Anyone tried this?
No I don't believe it can. The MGCP implementation in Asterisk is a
CallAgent not a
18 matches
Mail list logo