Jerry,
asterisk_execute() event_list=0 ret=55 last_command='Action: Logoff'
Response: Error[CR ][LF ]Message: Missing action in request[CR ][LF ][CR
][LF ]
Shows an error. Perhaps the originate did not complete before the logoff
was sent? I have never used original in AMI so it is just a guess.
Hi Dale,
I am in fact doing all the items you suggest. here is a log.
For normal commands I am logging off just fine.
Its just the heartbeat command I am getting an error on when logging out.
Thoughts?
Jerry
--
asterisk_command() Action: Login
asterisk_command() Username: X
asterisk_c
On Tue, Dec 16, 2014 at 1:04 PM, Jerry Geis wrote:
>
> I am running a heartbeat... Asterisk 11.15.0 - same behaviour is noticed
> on 1.4.43 also
>
> I issue a call through the API that does the below. just UserEvent and
> Hangup
>
>-- Executing [s@heartbeat:1] UserEvent("Local/s@heartbeat-
I am running a heartbeat... Asterisk 11.15.0 - same behaviour is noticed on
1.4.43 also
I issue a call through the API that does the below. just UserEvent and
Hangup
-- Executing [s@heartbeat:1] UserEvent("Local/s@heartbeat-000f;2",
"HeartBeat, Noop") in new stack
-- Executing [s@heart
users-boun...@lists.digium.com] On Behalf Of Steve Edwards
Sent: Friday, June 05, 2009 6:09 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] broken pipe in perl agi
On Fri, 5 Jun 2009, Danny Nicholas wrote:
> You're on the right track, Steve but t
On Fri, 5 Jun 2009, Danny Nicholas wrote:
> You're on the right track, Steve but that didn't do it either. Here is
> the Perl snippet:
> use strict;
> use warnings;
> my $towatch = $ARGV[0];
> my $a=0;
> my $retval=undef;
> # show hints will get hint information from the dialplan
> while ($a<1)
Otchet
Sent: Friday, June 05, 2009 9:59 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] broken pipe in perl agi
FYI - It works fine under perl 5.8.8 on RHEL5.2 w/ Asterisk 1.4.24.1
You might want to check your perl modules to see if they're up to
lf Of Danny Nicholas
Sent: Friday, June 05, 2009 9:43 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] broken pipe in perl agi
You're on the right track, Steve but that didn't do it either. Here is the
Perl snippet:
use strict;
ilto:asterisk-users-boun...@lists.digium.com] On Behalf Of Steve Edwards
Sent: Thursday, June 04, 2009 6:37 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] broken pipe in perl agi
On Thu, 4 Jun 2009, Danny Nicholas wrote:
> Here's what I got from
On Thu, 4 Jun 2009, Danny Nicholas wrote:
> Here's what I got from agi debug:
> agi debug
> AGI Debugging Enabled
> *CLI> AGI Tx >> agi_request: hintcheck.agi
[snip]
> AGI Rx << SET VARIABLE LINESTAT="Idle"
> AGI Tx >> 200 result=1
> [Jun 4 13:33:42] ERROR[28261]: utils.c:979 ast_carefulwrite:
LINESTAT="Hold"
Any other ideas?
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Steve Edwards
Sent: Thursday, June 04, 2009 2:12 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re
On Thu, 4 Jun 2009, Danny Nicholas wrote:
> Hi gang,
It's not a gang -- it's a club :)
> Since I'm getting no joy from device_Status or SIPPEER in
> 1.4.26-rc1, I thought I would do an AGI to read my hints and check for
> line in use that way. The AGI works fine from a prompt, but
Danny Nicholas schrieb:
> The AGI works fine from a prompt, but returns the dreaded
> "utils.c:966 ast_carefulwrite: write() returned error: Broken pipe" when I
> try to run it from the dialplan.
Sounds like
$SIG{'PIPE'} = 'IGNORE';
is what you need.
http://perldoc.perl.org/perlipc.html#Signals
Hi gang,
Since I'm getting no joy from device_Status or SIPPEER in
1.4.26-rc1, I thought I would do an AGI to read my hints and check for line
in use that way. The AGI works fine from a prompt, but returns the dreaded
"utils.c:966 ast_carefulwrite: write() returned error: Broken pip
On Friday 06 March 2009 03:02:30 pm Randy Paries wrote:
> On Tue, Feb 3, 2009 at 2:58 PM, Jose P. Espinal
wrote:
> > Hello List,
> >
> > I have been working on a little PHP software that uses AMI's
> > UpdateConfig command in order to modify some of it's config files.
> >
> >
> > I was working wi
On Tue, Feb 3, 2009 at 2:58 PM, Jose P. Espinal wrote:
> Hello List,
>
> I have been working on a little PHP software that uses AMI's
> UpdateConfig command in order to modify some of it's config files.
>
>
> I was working with 'Asterisk 1.4.22.1' and everything was working.
> After upgrading to '
On 14/02/2009 5:12 a.m., Örn Arnarson wrote:
> I am seeing this problem on 1.6.0.1 when dialing a busy DAHDI channel...
>
I'm seeing it too on recent builds - is the a bt entry we can add to?
--
Kind Regards,
Matt Riddell
Director
___
http://www.vent
I am seeing this problem on 1.6.0.1 when dialing a busy DAHDI channel...
On Fri, Feb 13, 2009 at 8:40 AM, Rilawich Ango wrote:
> I also experience that problem. Is it a bug?
>
> On Wed, Feb 4, 2009 at 5:53 AM, Mark Michelson
> wrote:
> > Remco Barendse wrote:
> >> 1.4.23.1 is quite badly broken
I also experience that problem. Is it a bug?
On Wed, Feb 4, 2009 at 5:53 AM, Mark Michelson wrote:
> Remco Barendse wrote:
>> 1.4.23.1 is quite badly broken and there are no significant new
>> features
>>
>
> There are no new features at all, actually. What problems are you having with
> 1.4
Remco Barendse wrote:
> 1.4.23.1 is quite badly broken and there are no significant new
> features
>
There are no new features at all, actually. What problems are you having with
1.4.23.1? It doesn't accomplish much to say that it is "quite badly broken"
without at least telling what is wro
1.4.23.1 is quite badly broken and there are no significant new
features
Better to revert back to 1.4.22.1
On Tue, 3 Feb 2009, Jose P. Espinal wrote:
> Hello List,
>
> I have been working on a little PHP software that uses AMI's
> UpdateConfig command in order to modify some of it's config
Hello List,
I have been working on a little PHP software that uses AMI's
UpdateConfig command in order to modify some of it's config files.
I was working with 'Asterisk 1.4.22.1' and everything was working.
After upgrading to 'Asterisk 1.4.23.1' I receive a lot of errors of the type:
ERROR[1
hi
i'm running asterisk since 2 weeks and sometimes it crashes reporting
some "ouch ... broken pipe error"
i wolud like to write a script shell that check if asterisk is
correctly started and, if not, it restart it, can i do it?
how?
i'm using asterisk 1.2.4 on slackware 10.2
thanks
__
> Junk at the beginning 49443303
> Warning, flexibel rate not heavily tested!
> Ouch ... error while writing audio data: : Broken pipe
These are messages from mpg123 NOT Asterisk.
bkw
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
htt
Hello,
I've done a very straightforward install of Asterisk, and can't seem to
get it started.
This is a proof-of-concept installation, and currently does not have
any T1/E1 or FXO/FXS cards in it. I just want to use it as an internal
SIP server for now.
However, when I try to start Asterisk
On Tue, Aug 24, 2004 at 12:55:50PM -0600, Mike Roberts wrote:
> When I woke up this morning * was giving me the message "broken pipe"
> when I try to log into the CLI... Thats all I know.
That has happened to me several times now over the last few weeks on one of my
installs. Nothing in the logs
When I woke up this morning * was giving me the message "broken pipe"
when I try to log into the CLI... Thats all I know.
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update op
rom: [EMAIL PROTECTED] [mailto:asterisk-users-
> > [EMAIL PROTECTED] On Behalf Of Steve
> > Sent: Tuesday, July 13, 2004 11:01 AM
> > To: [EMAIL PROTECTED]
> > Subject: [Asterisk-Users] Broken pipe in remote exeute
> >
> > -BEGIN PGP SIGNED MESSAGE-
> > H
Its not something that needs fixing.
bkw
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:asterisk-users-
> [EMAIL PROTECTED] On Behalf Of Steve
> Sent: Tuesday, July 13, 2004 11:01 AM
> To: [EMAIL PROTECTED]
> Subject: [Asterisk-Users] Broken pipe in remote exe
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I used to be able to run asterisk -rx 'stop gracefully' on stable.
But now with CVS-HEAD-07/07/04-20:09:43 it's returning:
'Broken pipe'
Any ideas why, or how to fix it?
- --
Steve
"They that would give up essential liberty for temporary saf
Hello everyone i was wondering if someone could
help me with a problem i am having with my asterisk server. atleast once a day i
cant get to my asterisk server and when i ssh into it and connect to the
currently running asterisk with asterisk -r i get a message back that says
Broken Pipe and
On Wed, 2003-12-17 at 00:57, Nicolas wrote:
> After a little investigation, I noticed that after each call on the CAPI
> server, two file Descriptor stays but the strange thing is what they are
> linked to:
>
> /proc/15118/fd> ls -l
> lr-x--1 root root 64 dÃc 17 04:50 25 ->
After a little investigation, I noticed that after each call on the CAPI
server, two file Descriptor stays but the strange thing is what they are
linked to:
/proc/15118/fd> ls -l
lr-x--1 root root 64 déc 17 04:50 25 -> pipe:[8022904]
l-wx--1 root root
Hi,
My release is the last one from the CVS, I get the same problem but with
a 4 BRI CAPI card (EICON DIVA SERVER 4BRI).
The number of file descriptor keeps growing with each call until the
system hangs.
Currently in my office I have two asterisk servers, one for a gateway
between 7960/SIP<->IAX
My release is about 2 month old. I don´t want to mess too much with my client´s
site - it is a 100 seat call center with dozens of softphones and some
app_queue.c patches we have programmed to register a couple of agents´ events.
> How old is your release.. and why not update? I'm using the
How old is your release.. and why not update? I'm using the latest cvs on
a few projects and its fine.
bkw
On Tue, 16 Dec 2003, Paulo H. Mannheimer wrote:
> Hi, I´m having a serious problem at one customer. After 6 hours answering a PRI
> line, * stops responding in a very similar situation as
Hi, I´m having a serious problem at one customer. After 6 hours answering a PRI
line, * stops responding in a very similar situation as described here ...
http://lists.digium.com/pipermail/asterisk-users/2003-July/015391.html
I took a look at "/proc/first * PID/fd" and there are hundreds of file
About once every day my * goes nuts and "asterisk
-r" responds with "broken pipe". All calls are dropped immediately, even
extension 600 (echo). Killing the process and restarting asterisk helps... until
next day. I'm running 0.5.0 release on RH9. Any ideas what's wrong, and what can
I do to
Hi.. i'm having the next problem with a Asterisks Box... like every 24 hours it
give the next error when i tray to connect to it.
[EMAIL PROTECTED]:~# asterisk -r
Asterisk CVS-09/29/03-17:13:53, Copyright (C) 1999-2001 Linux Support Services, Inc.
Written by Mark Spencer <[EMAIL PROTECTED]>
39 matches
Mail list logo