Re: [Asterisk-Users] Caller ID - TE405P - Telstra Onramp 10 - Australia

David, This ended up being the problem, it was enabled and is working as expected now. Thank you, Nathan. I know this might be a basic answer, but have you confirmed that CID is enabled and working on the onramp? I know when I dealt with T for an OnRamp 30 18months ago it was ordered with

Re: [Asterisk-Users] Caller ID - TE405P - Telstra Onramp 10 - Australia

Nathan Alberti wrote: Duane, My apologies if I have misunderstood but is this an error ? Dialing a 1300XX, number would make it 611300XX, then jumping to StripMSD(3) would make it 300XX ? I must update that, I completely re-wrote it and the more up to date version is at:

Re: [Asterisk-Users] Caller ID - TE405P - Telstra Onramp 10 - Australia

On Tue, 2004-12-21 at 00:59, Craig Guy wrote: Telstra Onramp use a 9 digit callerid. I use the following macro to 'correct' incoming callerid so that numbers are in the proper format to callback from the callerid memory of the phone: exten = s,1,GotoIf($[${ARG1} = ]?100:2)

Re: [Asterisk-Users] Caller ID - TE405P - Telstra Onramp 10 - Australia

On Wed, 22 Dec 2004 11:53:42 +1100, Adam Goryachev [EMAIL PROTECTED] wrote: All looks good up until here... Note, your phone will end up dialling which depending on your equipment may well be interpreted as 000 and be routed to emergency... Probably something you don't want!

Re: [Asterisk-Users] Caller ID - TE405P - Telstra Onramp 10 - Australia

:[EMAIL PROTECTED] On Behalf Of Nathan Alberti Sent: Tuesday, 21 December 2004 6:14 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Caller ID - TE405P - Telstra Onramp 10 - Australia I am having problems getting incoming caller id to work on a Telstra Onramp 10. I have changed

Re: [Asterisk-Users] Caller ID - TE405P - Telstra Onramp 10 - Australia

]; Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Tuesday, December 21, 2004 5:16 PM Subject: Re: [Asterisk-Users] Caller ID - TE405P - Telstra Onramp 10 - Australia Matt Hyne wrote: Hi Nathan, You shouldn't have to change the CIDRINGS

Re: [Asterisk-Users] Caller ID - TE405P - Telstra Onramp 10 - Australia

Hey Duane, Thanks for the suggestion, I had seen e164.org mentioned on the wiki and mailing lists a few time but until now had not taken the time to understand it. I've read the details and registered I just need to incorporate it into my dial plan correctly. Thanks again, Nathan. Duane

[Asterisk-Users] Caller ID - TE405P - Telstra Onramp 10 - Australia

I am having problems getting incoming caller id to work on a Telstra Onramp 10. I have changed /DEFAULT_CIDRINGS 2/ Is there something i'm missing ? My Cisco 7960 just shows asterisk Thanks, Nathan [zapata.conf] context=incoming usecallingpres=yes relaxdtmf=no rxgain=0.0 txgain=0.0 busydetect=no

Re: [Asterisk-Users] Caller ID - TE405P - Telstra Onramp 10 - Australia

Nathan Alberti wrote: I am having problems getting incoming caller id to work on a Telstra Onramp 10. I have changed /DEFAULT_CIDRINGS 2/ Is there something i'm missing ? My Cisco 7960 just shows asterisk Thanks, Nathan SNIP linux*CLI show channel Zap/2-1 -- General -- Name: Zap/2-1

Re: [Asterisk-Users] Caller ID - TE405P - Telstra Onramp 10 - Australia

Thank you for the suggestion David, I will have our provisioning team check this out. Regards, Nathan. David Uzzell wrote: Nathan Alberti wrote: I am having problems getting incoming caller id to work on a Telstra Onramp 10. I have changed /DEFAULT_CIDRINGS 2/ Is there something i'm missing ?