files are used with their SCCP firmware.
-= EB =-
> Hi,
>
> Could I ask how you have your sip.conf configured for the phones please.
>
> I am having probs getting mine to talk to asterisk
>
> I am assuming its a manual config on the phones too, what do you p
Thanks, tried that but to no avail. After much searching and
experimenting on the internet here's what I've found so far:
1. CallerID info is tranferred inside (I used the PrivacyManager option
and typed in some numbers... and they appeared on the SIP phone!).
2. I captured the line info usin
[EMAIL PROTECTED] wrote:
Here's my question... Is there a way to capture the inbound callerid from
my phone line (coming in on the X100P) and have it appear on my SIP phones
properly?
This is how my test config is right now:
extensions.conf
[incoming]
exten => s,1,Dial(SIP/2002,20)
The phone doe
Eldon Balzer wrote:
3. I am getting the following message a lot of the time on the * console:
ERROR[294928]: callerid.c:192 callerid_feed: fsk_serie made mylen < 0 (-15)
WARNING[294928]: chan_zap.c:4657 ss_thread: CallerID feed failed: Success
WARNING[294928]: chan_zap.c:4699 ss_thread: CallerID
Hi everyone,
I've been toying with * for quite some time now. I've got two Cisco
7940's with the SIP firmware playing nice with *. I can also make
outbound calls via IAXTel (toll-free calls only) and all other calls I
have routed out my X100P-clone adapter.
Here's my question... Is there a way