I am using Asterisk 1.2 with a TE410P connected to E1 PRI trunks.
The application relies on a DTMF digit string sent by the phone
after the call has connected. This DTMF is detected by Asterisk
under the control of WAIT FOR DIGIT commands send from an AGI
processor over a FastAGI connection.
at
www.generationd.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tony
Mountifield
Sent: Friday, March 02, 2007 10:56 AM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] DTMF detection problems on PRI channels?
I am using Asterisk 1.2
Hello,
I'm having a problem with the autoattendant. It won't recognize the
DTMF signals from certain people that call in. I have relaxed DTMF,
upgraded Asterisk from 1.2 to 1.2.12 to 1.2.12.1 as well as the zaptel
drivers. I have stopped X from running then only thing I didn't do
that was on
On Tue, Sep 19, 2006 at 05:29:17PM -0400, asterisk asterisk wrote:
I'm having a problem with the autoattendant. It won't recognize the
DTMF signals from certain people that call in. I have relaxed DTMF,
Are you sure?
Zapata.conf
[channels]
signalling=fxs_ks
[ ... ]
;relaxdtmf=yes
I'm
I did turn it on and off as it does not seem to make a difference. On 9/19/06, Jay R. Ashworth [EMAIL PROTECTED]
wrote:On Tue, Sep 19, 2006 at 05:29:17PM -0400, asterisk asterisk wrote: I'm having a problem with the autoattendant. It won't recognize the
DTMF signals from certainpeople that call
Hello Asterisk Community,
I'm using Voismart's GSM PCI cards to connect Asterisk to GSM cellular
network.
The problem I face is DTMF detection; that is, whenever I call to one of
the channels (SIMs) on GSM card through my Mobile phone, and dial DTMF
digits while in the call, the Asterisk
I have an Asterisk box (Fedora Core 2, kernel 2.6.10-1.771_FC2smp)
connected to an E1 (MFC/R2 signaling) through a TE110P Digium card. My
IVR doesn't work because sometimes a single digit is recognized two,
three times and sometimes not. I've already changed relaxdtmf to
yes as well as txgain and
