On Sat, Oct 29, 2005 at 10:58:22PM -0600, Ryan exclaimed:
snip
The problem is caused on the provider side, not in your asterisk. The
packets they are sending to your asterisk have the wrong sequence
numbers. I finished some code lastnight to *help* work-around this
issue, I just need to put the
On Oct 30, 2005, at 1:39 AM, Ryan wrote:
On Sat, Oct 29, 2005 at 10:58:22PM -0600, Ryan exclaimed:
snip
The problem is caused on the provider side, not in your asterisk. The
packets they are sending to your asterisk have the wrong sequence
numbers. I finished some code lastnight to *help*
On Sun, Oct 30, 2005 at 04:03:34PM -0500, Dave Grey exclaimed:
Hey, this is great. I'm running * on a mac, though, so I can't apply
it. Ah well, my loss.
The thing about the problems I am experiencing, though, is that they
are not in connections from other * servers. I am getting this on
On Sun, 2005-10-30 at 21:13 -0700, Ryan wrote:
I don't use IPKall but it is likely to be the same issue if your using
SIP to connect to them. I have the same issue with telasip.
If you contact IPKall and have them change you to IAX it may resolve the
issue I've never dealt with them so
On Oct 30, 2005, at 11:13 PM, Ryan wrote:
On Sun, Oct 30, 2005 at 04:03:34PM -0500, Dave Grey exclaimed:
The thing about the problems I am experiencing, though, is that they
are not in connections from other * servers. I am getting this on
SIP connections from IPKall. Is it still likely
On Oct 30, 2005, at 11:21 PM, trixter aka Bret McDanel wrote:
I am starting a provider that gives free service
Nice! You went from listing free providers to becoming one. ;-)
I would love an invite if you could use another tester.
Either way, good luck with this and thanks for providing
On Sun, Oct 30, 2005 at 08:21:42PM -0800, trixter aka Bret McDanel exclaimed:
snip
Odds are they wont, they only recently let you use direct from them to
you via SIP rather than going only through free world dialup. They are
clear on their page they are free and they dont give support for their
On Sun, 2005-10-30 at 23:42 -0500, Dave Grey wrote:
On Oct 30, 2005, at 11:21 PM, trixter aka Bret McDanel wrote:
I am starting a provider that gives free service
Nice! You went from listing free providers to becoming one. ;-)
I had been planning on offering free service for a while,
On Sun, 2005-10-30 at 21:43 -0700, Ryan wrote:
As I am starting a provider that gives free service I agree with this,
you do actually get what you pay for. The only difference is that I am
doing outbound (right now anyway) and have about 30 countries.
http://www.trxtel.com/ - its in beta
On Oct 29, 2005, at 1:20 AM, Ryan wrote:
On Thu, Oct 27, 2005 at 02:10:51PM -0400, Dave Grey exclaimed:
The digits seem to be either not recognized at all or recognized
incorrectly better than half the time. [...] I dial 7056 and it
sees 7055, I dial 7056 again and it sees 75, I dial
Thanks for the response. I am using CVS HEAD, unfortunately, and
still seeing these problems. When I posted the above, I was using
code checked out and built on 2005-10-11. Currently, I am running:
Asterisk CVS HEAD built by [EMAIL PROTECTED] on a Power Macintosh
running Darwin on
On Thu, Oct 27, 2005 at 02:10:51PM -0400, Dave Grey exclaimed:
These appear to be a common problems, but after spending half a day
reading the wiki and list archives I have not gained much useful
knowledge beyond the fact that these are a common problems. I am
hoping for some suggestions
These appear to be a common problems, but after spending half a day
reading the wiki and list archives I have not gained much useful
knowledge beyond the fact that these are a common problems. I am
hoping for some suggestions or pointers to further info.
I have an ivr in my incoming
13 matches
Mail list logo
