Hello,
I updated my test Asterisk box to CVS 01/12/2004 today and have seen the fax
detected messages coming for every call that comes in over my E&M T1[B8ZS
ESF]. This isn't a problem from a functionality standpoint(I have no fax
devices), but I see these two lines show up in the DEBUG logs about
On analog ports you need to Answer
Ringing
Wait,2
and then do something .
That should detect faxes.
regards
Martin
On Mon, 11 Aug 2003, Tilghman Lesher wrote:
> On Monday 11 August 2003 03:26 pm, Eduardo Goncalves wrote:
> > On Mon, 11 Aug 2003 15:15:08 -0500
> >
> > Tilghman Lesher <[EMAIL
Try adding:
exten => fax,1,Dial(blah)
Where Blah is the zap or SIP port your fax machine is connected to.
On Mon, 2003-08-11 at 15:26, Eduardo Goncalves wrote:
> On Mon, 11 Aug 2003 15:15:08 -0500
> Tilghman Lesher <[EMAIL PROTECTED]> wrote:
>
> > On Monday 11 August 2003 02:46 pm, Eduardo Gonc
For PRI->*->fax over FXS
It's as simple as having the fax extension the the incoming context
associated with the PRI channels. With PRI channels we can hear the fax
before we even answer (in most cases)
regards
Martin
On Tue, 12 Aug 2003, Adams, Gavin wrote:
> > From: Martin Pycko [mailto:[EMAIL
and a little more on fax config support
- Original Message -
From: "Tilghman Lesher" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, August 11, 2003 4:48 PM
Subject: Re: [Asterisk-Users] Fax Handled
> On Monday 11 August 2003 03:26 pm, Eduardo Goncal
On Thu, 14 Aug 2003, Eduardo Goncalves wrote:
> I'm using G.711alaw.
> My extensions.conf:
>
> ===
> [globals]
> TRUNK=Zap/g1
> [sip]
> exten => s,1,Background(demo-moreinfo)
> exten => fax,1,Dial(${TRUNK}/${EXTEN})
> exten => _0.,1,Dial(${TRUNK}/${EXTEN})
> exten => _9.,1,D
On Thursday 14 August 2003 08:30, Eduardo Goncalves wrote:
> On Wed, 13 Aug 2003 17:56:46 -0500
>
> Tilghman Lesher <[EMAIL PROTECTED]> wrote:
> > The CNG tones are sent by the sending fax machine, not the
> > receiving fax machine. Those tones are sent from the moment that
> > the fax machines di
On Mon, 11 Aug 2003 15:15:08 -0500
Tilghman Lesher <[EMAIL PROTECTED]> wrote:
> On Monday 11 August 2003 02:46 pm, Eduardo Goncalves wrote:
> > On Sun, 10 Aug 2003 01:50:33 -0500
> >
> > Tilghman Lesher <[EMAIL PROTECTED]> wrote:
> > > Are the faxes all being sent by the same fax machine? If not,
On Thu, 14 Aug 2003 10:24:46 -0500
Tilghman Lesher <[EMAIL PROTECTED]> wrote:
> > > How is your fax machine connected to the Asterisk machine?
> > >
> > |FAX|---|PBX|---|ATA186|SIP---|Asterisk|E1-e&m|PSTN|
>
> I suspect your problems are with the codec you're using in the SIP
> connec
On Wednesday 13 August 2003 05:40 pm, Eduardo Goncalves wrote:
> On Mon, 11 Aug 2003 15:48:57 -0500
>
> Tilghman Lesher <[EMAIL PROTECTED]> wrote:
> > > extensions.conf
> > > ===
> > > [globals]
> > > TRUNK=Zap/g1
> > >
> > > [sip]
> > > exten => _0.,1,Dial(${TRUNK}/${EXTEN})
> > > exte
On Mon, 11 Aug 2003 15:48:57 -0500
Tilghman Lesher <[EMAIL PROTECTED]> wrote:
> >
> > extensions.conf
> > ===
> > [globals]
> > TRUNK=Zap/g1
> >
> > [sip]
> > exten => _0.,1,Dial(${TRUNK}/${EXTEN})
> > exten => _9.,1,Dial(${TRUNK}/${EXTEN})
> >
> > exten => 710,1,Dial(SIP/client1)
> >
On Fri, 2003-08-08 at 10:29, Eduardo Goncalves wrote:
> Hello,
>
> Is there any configuration in zapata.conf for fax detection (or transmission)?
> When I try to send a fax trought asterisk, the line 'Fax Handled:' is always
> set to "no". The scenario is:
>
> [ata186]---sip---[aster
On Sun, 10 Aug 2003 01:50:33 -0500
Tilghman Lesher <[EMAIL PROTECTED]> wrote:
> Are the faxes all being sent by the same fax machine? If not, are the
> faxes being detected consistently from each source? If the remote fax
> machine/modem does not send CNG tones, then Asterisk will not detect
> a
Hello,
Is there any configuration in zapata.conf for fax detection (or transmission)?
When I try to send a fax trought asterisk, the line 'Fax Handled:' is always
set to "no". The scenario is:
[ata186]---sip---[asterisk]---e1 E&M---[pstn]
Fax sometimes goes without probl
On Friday 08 August 2003 13:30, Eduardo Goncalves wrote:
> On 08 Aug 2003 11:39:47 -0500
>
> Steven Critchfield <[EMAIL PROTECTED]> wrote:
> > > Fax sometimes goes without problem and sometimes the fax machine
> > > can't send the fax.
> >
> > If your SIP link is over a long line, or that has muc
On Monday 11 August 2003 02:46 pm, Eduardo Goncalves wrote:
> On Sun, 10 Aug 2003 01:50:33 -0500
>
> Tilghman Lesher <[EMAIL PROTECTED]> wrote:
> > Are the faxes all being sent by the same fax machine? If not,
> > are the faxes being detected consistently from each source? If
> > the remote fax m
On 11 Aug 2003 15:34:38 -0500
Eric Wieling <[EMAIL PROTECTED]> wrote:
> Try adding:
>
> exten => fax,1,Dial(blah)
>
> Where Blah is the zap or SIP port your fax machine is connected to.
>
But I want to send a fax, if I put Dial(blah), and blah is my fax machine, how
could I send the f
It could work if it would be coming over g711 and you'd have
dtmfmode=inband set for that call
regards
Martin
On Thu, 14 Aug 2003, James Golovich wrote:
>
>
> On Thu, 14 Aug 2003, Eduardo Goncalves wrote:
>
> > I'm using G.711alaw.
> > My extensions.conf:
> >
> > ===
> > [gl
On Wed, 13 Aug 2003 17:56:46 -0500
Tilghman Lesher <[EMAIL PROTECTED]> wrote:
>
> The CNG tones are sent by the sending fax machine, not the receiving
> fax machine. Those tones are sent from the moment that the fax
> machines dials and continues until either a timeout or the receiving
> fax mac
> From: Martin Pycko [mailto:[EMAIL PROTECTED]
>
> On analog ports you need to Answer
> Ringing
> Wait,2
> and then do something .
>
> That should detect faxes.
Martin,
Could you show an example of this for an incoming PRI -> FXS analog fax?
Regards,
--- Gavin
On Monday 11 August 2003 03:26 pm, Eduardo Goncalves wrote:
> On Mon, 11 Aug 2003 15:15:08 -0500
>
> Tilghman Lesher <[EMAIL PROTECTED]> wrote:
> > On Monday 11 August 2003 02:46 pm, Eduardo Goncalves wrote:
> > > I've tested with 3 diferent machines. Asterisk didn't detect
> > > them.
> >
> > What
On 08 Aug 2003 11:39:47 -0500
Steven Critchfield <[EMAIL PROTECTED]> wrote:
> >
> > Fax sometimes goes without problem and sometimes the fax machine can't send
> > the fax.
>
> If your SIP link is over a long line, or that has much in the way of
> variable latency, then this will just have
Are you running latest CVS? I think we addressed this issue a few days
ago with the hit='f' thing.
Mark
On Wed, 12 Mar 2003, Darrell Eldridge wrote:
> I doubt it's a signal loss problem. It's a simple
> circuit, connected through our local Meridian, so it's
> fax-to-Meridian [A]
> Meridian
>And I know that the fax works okay; it's a production
>unit that gets used every day.
>
>As for the conf's, I've tried several things. Here's
>my best guess so far:
>
>from zapata.conf:
>
> context => incomingfax
> channel => 47
>
>and from extensions.conf:
>
> [incomingfax]
> exten => s,1,An
I doubt it's a signal loss problem. It's a simple
circuit, connected through our local Meridian, so it's
fax-to-Meridian [A]
Meridian internal [D]
Meridian to Channel Bank [A]
Channel Bank to Asterisk [D]
And I know that the fax works okay; it's a production
unit that gets used every day.
>Tim - can you show us your config as an example ?
[inBound]
exten => s,1,Answer
exten => s,2,setmusiconhold,default
exten => s,3,DigitTimeout,5
exten => s,4,responsetimeout,20
exten => s,5,BackGround,officemenu ;/var/lib/asterisk/sounds
;... other exts
;Fax Test
exten => fax,1,Dial,Zap/6
--
I know there was discussion at one point of signal loss through multiple
d/a and a/d conversions
what speed does it connect at through the extension ? (assuming analog line in)
Tim - can you show us your config as an example ?
At 11:29 AM 3/12/2003 -0800, you wrote:
>I still haven't been able
It's dynamically changed to "Yes" when the fax gets detected on this
channel.
regards
Martin
On Wed, 12 Mar 2003, Darrell Eldridge wrote:
> I still haven't been able to get fax detection going,
> but I came across something: when I execute "zap show
> channel 47" one of the parameters shown is
>I still haven't been able to get fax detection going,
>but I came across something: when I execute "zap show
>channel 47" one of the parameters shown is "Fax
>Handled: no". I assume that's a reflection of
>something in zapata.conf, but I don't find anything
>there. Should it read "...yes" in
Fax handled will be set to yes when zaptel detects the fax CNG tones on
the line. At that point it will try to switch the call to the fax
extension
James
On Wed, 12 Mar 2003, Darrell Eldridge wrote:
> I still haven't been able to get fax detection going,
> but I came across something: when I
I still haven't been able to get fax detection going,
but I came across something: when I execute "zap show
channel 47" one of the parameters shown is "Fax
Handled: no". I assume that's a reflection of
something in zapata.conf, but I don't find anything
there. Should it read "...yes" in order fo
31 matches
Mail list logo
