Hello,
Just out of curiosity, what E1 card are you using in Asterisk?
Best Regards,
--
Telmo
On Mon Dec 20 8:19 , 'Guillermo Freige' [EMAIL PROTECTED] sent:
MFCR2 is hanging under heavy load in my configuration. It always segfaults
in the same point. This is the coredump debug.
During
Hi Sam,
You can ignore that. Its just debug. The next version will make it
configurable.
Steve
Sam Njenga wrote:
Hi all
I have MFCR2 successfully installed but seems to get warnings a s seen
below when I start asterisk. Am running on Redhat 9.
Asterisk Ready.
*CLI Dec 20 08:40:38
PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Monday, December 20, 2004 4:33 PM
Subject: Re: [Asterisk-Users] MFC/R2 errors
Hi Sam,
You can ignore that. Its just debug. The next version will make it
configurable.
Steve
Sam
Hi Sam,
So what happens? Your logs shows a perfectly normal startup. The E1
should then be waiting for an outgoing or incoming call attempt. You
should see *something* happen in the log.
The example configuration information in the install instructions should
be OK to get you started.
MFCR2 is hanging under heavy load in my configuration. It always segfaults
in the same point. This is the coredump debug.
During segfaults, the call structure points to an invalid area.
(gdb) list
584 uc_log(uc, UC_LOG_FLOW, Far end disconnected - state 0x%X\n,
call-state);
585
586
, 2004 5:59 PM
Subject: Re: [Asterisk-Users] MFC/R2 errors
Hi Sam,
So what happens? Your logs shows a perfectly normal startup. The E1
should then be waiting for an outgoing or incoming call attempt. You
should see *something* happen in the log.
The example configuration information
Hi all
I have MFCR2 successfully
installed but seems to get warnings a s seen below when I start asterisk. Am
running on Redhat 9.
Asterisk Ready.*CLI Dec 20
08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2
far_unblocking_expiredDec 20 08:40:38