I'm using mediatrix mgcp device without problems with [EMAIL PROTECTED]
2.0 over the LAN. But now I trying one of this devices through
internet. My firs problem was nat, but I decided to leave this problem
for later and try it through a vpn. I used gvpe because it is very
transparent. The device co
Hello,
I have noticed a little problem in chan_mgcp.so.
After a few unsuccessful attempts to call an endpoint using
MGCP/aaln/[EMAIL PROTECTED] I have noticed the following on the system running
asterisk using netstat.
udp50524 0 XX.XX.85.XX:2427 0.0.0.0:* 2666/asterisk
T
Title: MGCP Problem
Turns out this was a typo in my extensions.conf file all along. Many thanks to the person who pointed it out. The answer was staring me in the face the entire time, but I just couldn't see it. Apologies to all
Shouldn't the endpoint be MGCP/aaln/[EMAIL PROTECTED] instead of
[EMAIL PROTECTED]? AFAIK, the MGCP RFC recommends aaln/# for
analog lines.
Can you audit the endpoint to check if you got the name right?
Hope this helps.
Juan J. Sierralta P. wrote:
On Wed, 2004-05-05 at 13:45, Brad White wrote
Title: MGCP problem
The latest cvs mgcp code seems to be slightly broken. I have two gateways and both of them only report their ip address to * instead of a hostname. When I audit the endpoints, * properly places the ip address in brackets and the audit is successful. The phones connected
Hi.
Thanks for the tip. Now i'm able to recognize the endpoint MGCP. But i can
not place a call. I'm attaching the debug from the asterisk and two
configurations files (mgcp.conf and extension.conf). For my first test i
just want to call the voice mail, that has the 112 extension.
The debu
Hi,
> -Original Message-
> from 64.76.148.186:2427Verb: 'ntfy', Identifier: '6001', Endpoint:
> 'aaln/0/[EMAIL PROTECTED]', Version: 'MGCP 1.0'
> 3 headers, 0 lines
> Jan 22 18:05:11 NOTICE[49159]: chan_mgcp.c:1102
> find_subchannel: Gateway
> 'ap1' (and thus its endpoint 'aaln/0/0') doe
Hi.
I'm new in Asterisk with MGCP. I set up a MGCP user agent and start asterisk
with the next configuration files.
'--- extensions.conf
[general]
static=yes
writeprotect=yes
[globals]
ap1 => mgcp/aaln/[EMAIL PROTECTED]
[macro-ap
Hi,
I forgot to say that I have about 300 MGCP endpoints in
my real network.
Best regards,
Sergi Gabunia
- Original Message -
From:
Sergi Gabunia
To: [EMAIL PROTECTED]
Sent: Thursday, November 27, 2003 12:05
PM
Subject: [Asterisk-Users] MGCP
problem
Hi all,
I have VOIP network built with MGCP endpoints.The
manufacturer of endpoints is ASKEY. I downloaded latest Asterisk software and
found it very useful for me. I configured it and it seems taht everything works
OK when I am testing it with one or two endpoints. After that I tried to
10 matches
Mail list logo
