Re: [Asterisk-Users] Meetme conf

2006-05-18 Thread Gavin Henry
quote who=Sharon Lim hi there, i am wondering can meetme.conf able to support diffferent context. Cause currently, it has [rooms] context. ] is it possible to have same conference number with different context? thanks Try it and see ;-) -- Kind Regards, Gavin Henry. Open Source. Open

Re: [Asterisk-Users] Meetme conf

2006-05-18 Thread Sharon Lim
Hmm...any idea where to define the context of a conference? Cause from my understanding, [rooms] context is a default. ThanksOn 5/18/06, Gavin Henry [EMAIL PROTECTED] wrote: quote who=Sharon Lim hi there, i am wondering can meetme.conf able to support diffferent context. Cause currently, it has

[Asterisk-Users] Meetme conf

2006-05-17 Thread Sharon Lim
hi there, i am wondering can meetme.conf able to support diffferent context. Cause currently, it has [rooms] context. ]is it possible to have same conference number with different context?thanks ___ --Bandwidth and Colocation provided by Easynews.com --

[Asterisk-Users] meetme - conf-invalid

2005-06-16 Thread scott
Hi Peoples I am having problems with meetme, in that it responds with conf-invalid when I dial a conference number. I notice that there is a note with regards to ztdummy, and the need for that to be loaded. Is this still the case? Is meetme dependent on this module? I do NOT use

RE: [Asterisk-Users] meetme - conf-invalid

2005-06-16 Thread Kevin Bockman
Yes, Meetme needs timing. You can install ztdummy. http://www.voip-info.org/tiki-index.php?page=Asterisk%20timer%20ztdummy You also need to recompile asterisk after you compile and install zaptel. Kevin ___ Asterisk-Users mailing list

Re: [Asterisk-Users] meetme - conf-invalid

2005-06-16 Thread qrss
Yes, meetme requires a clock source. You could try ztdummy. I tried using an FXO card as a clock source and observed that SIP calls connected to the conference seemed to get out of sync. Basically, after perhaps 20 minutes or so in conference there was a 2 - 3 second delay between the time that

RE: [Asterisk-Users] meetme - conf-invalid

2005-06-16 Thread Kevin Bockman
Yes, meetme requires a clock source. You could try ztdummy. I tried using an FXO card as a clock source and observed that SIP calls connected to the conference seemed to get out of sync. Basically, after perhaps 20 minutes or so in conference there was a 2 - 3 second delay between the time

[Asterisk-Users] Meetme conf and Shoutcast

2005-01-16 Thread Mike
We would like to know if there is a way to broadcast (in realtime) a conferance. We hold large phone conferances and would like to know if we could have some of our users listen over a streaming services. Formats we have looked at include: Shoutcast,Real Networks,QuickTime, and dare I say

Re: [Asterisk-Users] Meetme conf and Shoutcast

2005-01-16 Thread Tobias Jönsson
On Sun, 16 Jan 2005, Mike wrote: We would like to know if there is a way to broadcast (in realtime) a conferance. http://www.voip-info.org/wiki-Asterisk+cmd+Ices I haven't tried it though. -- Regards, Tobias Jönsson, Lund SE___ Asterisk-Users mailing

[Asterisk-Users] meetme conf-background.agi

2004-05-07 Thread Atif Rasheed
Hello there! Somebody tried the meetme|b which initiates the conf-background AGI Actually I want to originate another call from a conferencemy AGI originates the call and connects it to the conference, but the call is nowhere My extension exten = 21,1,meetme(21|pb) and my

RE: [Asterisk-Users] meetme conf-background.agi

2004-05-07 Thread brian
Only works on zap interfaces. What are you using? bkw -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Atif Rasheed Sent: Friday, May 07, 2004 7:57 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] meetme conf-background.agi Hello