Re: [asterisk-users] PRI Issues After Upgrade

I'm digging this back up since the problem persists. I've been attempting to figure out what's been going on and I'm at a stopping point again. Even though I swore I checked it, it turns out the two cards and the ethernet controller were all on the same IRQ. I moved the cards around so they ar

Re: [asterisk-users] PRI Issues After Upgrade

Stephen H. Gerstacker wrote: Came in this morning to more of the same: Then, if you have the ability, I'd drop 1.2 back into place and see if it's happy. But, my feeling is that you'll need to contact the provider. The other thing that comes to mind is that your PRI card is having issues.

Re: [asterisk-users] PRI Issues After Upgrade

Came in this morning to more of the same: PRI Span: 1 !! Unknown IE 128 (cs0) -- Span 1: Channel 0/23 got hangup, cause 81 Also, I got a lot of this as well: [Sep 14 05:54:05] WARNING[16624]: sig_pri.c:1054 pri_find_dchan: Span 1: No D-channels available! Using Primary channel as D-chann

Re: [asterisk-users] PRI Issues After Upgrade

Stephen H. Gerstacker wrote: Is there a big difference between the two? From what I've read, a DMS100 can redirect a call off of your system, meaning that if you have an inbound call and you want to redirect it to a different number, the DMS100 will redirect the call and take your system ou

Re: [asterisk-users] PRI Issues After Upgrade

Stephen H. Gerstacker wrote: I'm just a simple programmer who happens to be the only IT guy in the office. And I'm just an IT guy, that started learning (And still am) about phone systems around 10 years ago. I was just going through the process of elimination, the differences between our

Re: [asterisk-users] PRI Issues After Upgrade

I made the switch and everything seems to be working. It's hard to tell, since it never seems to fail for me, but fails once people get in. A question, though. When we moved the original box to our new office, they asked if we could support the dms100 setting, which worked. National seems to b

Re: [asterisk-users] PRI Issues After Upgrade

Stephen H. Gerstacker wrote: Anything else I can try? Try switchtype=national just for testing. Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety." --

Re: [asterisk-users] PRI Issues After Upgrade

I disabled the echo cancelled on the PRI and the same issues are still popping up: PRI Span: 1 !! Unknown IE 128 (cs0) -- Span 1: Channel 0/22 got hangup, cause 16 Anything else I can try? Stephen H. Gerstacker Sr. Database Developer Electronic Data Payment Systems Phone: 866.578.9740 ext.

Re: [asterisk-users] PRI Issues After Upgrade

When we moved buildings, the PRI provider specifically asked to switch to dms100. That's how the old server was as well. I'll try the echo canceller first. - Stephen H. Gerstacker On Sep 11, 2011, at 9:07, "Doug Lytle" wrote: > > Stephen H. Gerstacker wrote: >> >> switchtype=dms100 >> > >

Re: [asterisk-users] PRI Issues After Upgrade

Stephen H. Gerstacker wrote: switchtype=dms100 Are you sure that your switchtype is correct and your provider has a dms100? If not, change this to national. If so, the two things I'd try to narrow it down are: 1.) Temporarily remove the AEX410 card and test again 2.) Temporarily disab

Re: [asterisk-users] PRI Issues After Upgrade

/etc/dahdi/system.conf: # Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 31 18:10:31 2011 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1:

Re: [asterisk-users] PRI Issues After Upgrade

Stephen H. Gerstacker wrote: so any help would be appreciated You could start by supplying snippets of your config for the PRI. Telling us what PRI card you're using. For example, my dahdi config for my PRI: cd /etc/dahdi cat system.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 defaultzo

[asterisk-users] PRI Issues After Upgrade

I've finally moved from my 5 year old 1.2 installation to a 1.8 installation. I'm using the packages supplied by asterisk.org for Ubuntu 10.04, so I am at Asterisk 1.8.6. On the console, I am seeing: PRI Span: 1 !! Unknown IE 128 (cs0) -- Span 1: Channel 0/22 got hangup

RE: [asterisk-users] PRI issues

ssage- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Lytle Sent: Saturday, November 04, 2006 7:43 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] PRI issues Doug Lytle wrote: > Hey everybody, > > I've, within the last

Re: [asterisk-users] PRI issues

Doug Lytle wrote: Hey everybody, I've, within the last 3 weeks, moved over to a PRI from SBC/AT&T. I've received several complaints about dropped calls. Reviewing the archives on PRI and dropped calls shows that I should set the resetinterval=never in the zapata.conf and restart. This J

[asterisk-users] PRI issues

Hey everybody, I've, within the last 3 weeks, moved over to a PRI from SBC/AT&T. I've received several complaints about dropped calls. Reviewing the archives on PRI and dropped calls shows that I should set the resetinterval=never in the zapata.conf and restart. This hasn't helped. The dr

RE: [asterisk-users] PRI issues with telco access codes

>I do have another hand-rolled install of Asterisk 1.2.9.1 with identical >hardware (Digium T1 and FXS boards) on a PRI with the same telco that is >working fine with the account codes. >I'm stumped. Anyone have any ideas or pointers? shot in the dark: pridialplan=unknown dumps digits exactl

[asterisk-users] PRI issues with telco access codes

I just upgraded one of my Asterisk installations from a hand-rolled installation to Trixbox 1.1. Everything is working great for the most part. We have long-distance account codes setup through our telco for billing purposes. I realize I could setup this up onsite, but it is easier for our accou

Re: [Asterisk-Users] PRI issues

Mike, here is the interrupts (sorry for the formatting) CPU0 CPU1 CPU2 CPU3 0:117 174878327 0 0IO-APIC-edge timer 1: 0928 0 0IO-APIC-edge i8042 8: 0 1 0 0I

Re: [Asterisk-Users] PRI issues

Kevin Smith wrote: Hi everyone, I have been having some problems lately with our PRI and Asterisk, or maybe it is just me. It happens once maybe twice a day, but when some of our customers are calling in, the phone just drops on them. I pulled the information below from the log from one Mar 2

Re: [Asterisk-Users] PRI issues

Post your 'cat /proc/interrupts' for us. Kevin Smith wrote: Hi everyone, I have been having some problems lately with our PRI and Asterisk, or maybe it is just me. It happens once maybe twice a day, but when some of our customers are calling in, the phone just drops on them. I pulled the inf

[Asterisk-Users] PRI issues

Hi everyone, I have been having some problems lately with our PRI and Asterisk, or maybe it is just me. It happens once maybe twice a day, but when some of our customers are calling in, the phone just drops on them. I pulled the information below from the log from one that happened. I notice w

RE: [Asterisk-Users] PRI issues with TE410P

(UK) Telco>Internet Subject: RE: [Asterisk-Users] PRI issues with TE410P From: "Azher Amin" <[EMAIL PROTECTED]> Date: Thu, 25 Mar 2004 09:09:18 +0500 Hi Tan, I have already turned off the HT from the BIOS (while it was enabled, asterisk was not even stable with 2 pri's). Furt

RE: [Asterisk-Users] PRI issues with TE410P

rom: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, March 24, 2004 5:03 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] PRI issues with TE410P Before going to gentoo or another version of linux, try the following: 1) turn hyperthreading off in

RE: [Asterisk-Users] PRI issues with TE410P

h 2004 08:49 To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] PRI issues with TE410P Dear, Are you using Redhat9.0, coz I discussed about this yesterday with mike in Digium, and he said that this is normal with Redhat (due to its SMP handling problems), further he suggested to shift either to red

RE: [Asterisk-Users] PRI issues with TE410P

see this behavior again. Regards Azher -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of reseaux Sent: Wednesday, March 24, 2004 2:32 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] PRI issues with TE410P Dear i have found the same problem

Re: [Asterisk-Users] PRI issues with TE410P

Dear i have found the same problem last sunday in my * box and freeze itself. My Box is Pentium 4 HT with 2 CPU and i see it in /proc/interrupts - CPU0 CPU1 CPU2 CPU3 0: 13088533 0 0 0IO-APIC-edge timer 1:

RE: [Asterisk-Users] PRI issues with TE410P

March 21, 2004 3:41 PM >To: [EMAIL PROTECTED] >Subject: [Asterisk-Users] PRI issues with TE410P > >Hi, > >I am having some problems mentioned below, the box is in >production live >environment with traffic around 30 - 100 calls. > >I am running T/E410P in a Dual P4 xeo

[Asterisk-Users] PRI issues with TE410P

Hi, I am having some problems mentioned below, the box is in production live environment with traffic around 30 - 100 calls. I am running T/E410P in a Dual P4 xeon with HT disabled. I am using zaptel 0.9.0 and asterisk stable 1 release. There is no gui, just mysql, perl (small script) and asteris