On Sun, Jan 23, 2005 at 11:56:50AM -0600, Michael K. Rodriguez User wrote:
I had a similar problem with power.
I connected Asterisk to a Belkin UPS 1200VA and the the server would boot up
and asterisk would load but the T1s on the Quad T1 card failed to come up. I
placed a loop on the card and
I had a similar problem with power.
I connected Asterisk to a Belkin UPS 1200VA and the the server would boot up
and asterisk would load but the T1s on the Quad T1 card failed to come up. I
placed a loop on the card and still no change. Finally, I removed the UPS
and the T1s came up.
I have been getting the following message in Asterisk and it shuts Asterisk
down, needing a reboot.
Power alarm on Module 2
I have
(1) TDM400P with (2) FXS (2) FXO cards
(1) X100P card
Any ideas?
Since nobody answered, I'll guess something :)
Did you plug the power on the TDM400P ?
Michael K. Rodriguez User wrote:
I had a similar problem with power.
I connected Asterisk to a Belkin UPS 1200VA and the the server would boot up
and asterisk would load but the T1s on the Quad T1 card failed to come up. I
placed a loop on the card and still no change. Finally, I removed the UPS
]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Sunday, January 23, 2005 10:32 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Power Alarm Error - Help
I have been getting the following message in Asterisk and it shuts
Asterisk down, needing
Martin Keding wrote:
Yes, The card is working fine most of the time. It just gets this message on
occasion and then Asterisk shuts down. I debating putting surge suppressors
on the PSTN lines. Could this be caused but a voltage issue from the Telco?
I was told the other day on IRC that telephone
I have been getting the following message in Asterisk and it shuts Asterisk
down, needing a reboot.
Power alarm on Module 2
I have
(1) TDM400P with (2) FXS (2) FXO cards
(1) X100P card
Any ideas?
Thanks
Martin
___
Asterisk-Users mailing list