Johann Steinwendtner [EMAIL PROTECTED] writes:
I can only guess, but I think I can remember that the creflen needs
to be 2 octets for qsig. Check what the Alcatel switch sends in the
setup message to *.
Thanks, I will have a look at that.
Anyway, why do use QSIG ? Does name display work on
Hi all,
I tried to connect the bristuffed(0.3.0-PRE-1i) * to an Alcatel PBX
via BRI (zaphfc) and Q.SIG. The Alcatel PBX is connected to the
outside world and should forward our calls to the telco. This setup
works correctly as far as I use euroisdn as the switchtype.
The first problem was that
I can only guess, but I think I can remember that the creflen needs
to be 2 octets for qsig. Check what the Alcatel switch sends in the
setup message to *.
Anyway, why do use QSIG ? Does name display work on the * implementation ?
Best regards
Hans
P.S.: Schoene Gruesse an Kurt Krenn