: [Asterisk-Users] TE110P flashing red/green when PRI connected
On Mon, 8 Aug 2005, Fredrik Lithén wrote:
I'm having difficulties getting up my TE110P (running as a E1) when I
connect it to the PRI. If I start the server with a loopback connector
everything seems fine and the led is green but when I
On Tue, 9 Aug 2005, Fredrik Lithén wrote:
Yes, I tried that but it sent me a bit offtrack as it reported blue
which I assumed was a clocksync problem, or at least, that was the info
I could find.
As far as I can tell zttool/zaptel uses the term BLue Alarm for the E1
term AIS (Alarm Indication
Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] TE110P flashing red/green when PRI connected
On Tue, 9 Aug 2005, Fredrik Lithén wrote:
Yes, I tried that but it sent me a bit offtrack as it reported blue
which I assumed was a clocksync problem, or at least
On Tuesday 09 August 2005 04:32, Peter Svensson wrote:
A bitstream is present at the receiver, though it is unframed and invalid
(i.e. the receiver is seeing a transmitter that does not quite know what
to transmit). This is different from a red alarm where there is no
bitstream at all.
I
On Tue, 9 Aug 2005, Andrew Kohlsmith wrote:
On Tuesday 09 August 2005 04:32, Peter Svensson wrote:
A bitstream is present at the receiver, though it is unframed and invalid
(i.e. the receiver is seeing a transmitter that does not quite know what
to transmit). This is different from a red
with either the wiring, the PC or something else?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter Svensson
Sent: den 9 augusti 2005 14:11
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] TE110P flashing red/green
On Tue, 9 Aug 2005, Fredrik Lithén wrote:
Perhaps everything isn't as spiffy as I thought
When running zttool the card still reports as internally clocked
Zaptel.conf:
# Global data
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
Zttool still shows the card as internally
Hi
I'm having difficulties getting up my TE110P (running as a E1) when I connect
it to the PRI. If I start the server with a loopback connector everything seems
fine and the led is green but when I connect it to the PRI the flashing starts
I can't seem to find anything in the log
On Mon, 8 Aug 2005, Fredrik Lithén wrote:
I'm having difficulties getting up my TE110P (running as a E1) when I
connect it to the PRI. If I start the server with a loopback connector
everything seems fine and the led is green but when I connect it to the
PRI the flashing starts
The
