I too have been having inbound dtmf problems with VP Connect using
iax2 for inbound. When I switched to sip, and added the
relaxdtmf=yes, all 10 inbound test calls I did seemed to work fine for
dtmf. I'm going to leave my config set up to use sip for inbound VP
Connect calls for a while and see
http://bugs.digium.com/view.php?id=4631
FYI
I am experiencing the same, but due to lack of cooperation from ITSP
am not able to proceed with debugging it.
Feel free to pursue...
regards,
mark
On 8/8/05, Justin Richards [EMAIL PROTECTED] wrote:
I too have been having inbound dtmf problems
We are developing an IVR application and when I am testing locally on
my machine using a softphone (iaxcomm) the digits I press for GET DATA
work every time. I am testing with a local extension that goes right
into my routine. However when I try to call in to the system using an
analog or
On 6/11/05, Rich Adamson [EMAIL PROTECTED] wrote:
I am wondering if anyone else is experiencing similar issues. I
believe the problem lies with VoicePulse because we are using them for
IAX connections. I don't believe its a bandwidth problem on my
network (cable) because I have tried
I am wondering if anyone else is experiencing similar issues. I
believe the problem lies with VoicePulse because we are using them for
IAX connections. I don't believe its a bandwidth problem on my
network (cable) because I have tried the same exact system/config
everything on
On 6/11/05, Rich Adamson [EMAIL PROTECTED] wrote:
That's entirely possible. Had something similar with livevoip.com (with
the answered iax call issue).
You should be able to determine whether its a voicepulse issue by either
doing a iax debug (look for the dtmf digits), or, using ethereal
Michael,
try relaxdtmf=yes in your iax.conf, or if you are using sip, then in
sip.conf
regards,
Umair bari
Michael Stearne wrote:
On 6/11/05, Rich Adamson [EMAIL PROTECTED] wrote:
That's entirely possible. Had something similar with livevoip.com (with
the answered iax call issue).
I don't believe relaxdtmf is a valid parameter for iax.conf; just sip.conf.
(per the most recent sample configs)
Michael,
try relaxdtmf=yes in your iax.conf, or if you are using sip, then in
sip.conf
regards,
Umair bari
Michael Stearne wrote:
On 6/11/05,
On 6/11/05, Rich Adamson [EMAIL PROTECTED] wrote:
I don't believe relaxdtmf is a valid parameter for iax.conf; just sip.conf.
(per the most recent sample configs)
I didn't find it either. I put it in the config anyway but it didn't
seem to make a difference. I also tried changing the call
I don't believe relaxdtmf is a valid parameter for iax.conf; just sip.conf.
(per the most recent sample configs)
I didn't find it either. I put it in the config anyway but it didn't
seem to make a difference. I also tried changing the call codec to
ulaw but that had no significant
On 6/11/05, Rich Adamson [EMAIL PROTECTED] wrote:
I don't believe relaxdtmf is a valid parameter for iax.conf; just
sip.conf.
(per the most recent sample configs)
I didn't find it either. I put it in the config anyway but it didn't
seem to make a difference. I also tried changing
I don't believe relaxdtmf is a valid parameter for iax.conf; just
sip.conf.
(per the most recent sample configs)
I didn't find it either. I put it in the config anyway but it didn't
seem to make a difference. I also tried changing the call codec to
ulaw but that had no
On 6/11/05, Rich Adamson [EMAIL PROTECTED] wrote:
If you are not seeing any of those, then voicepulse is sending the dtmf
via inband audio tones. The accuracy of inband audio tones will be less
then if the dtmf digits are sent within iax packets (Type: dtmf). If they
are arriving via
If you are not seeing any of those, then voicepulse is sending the dtmf
via inband audio tones. The accuracy of inband audio tones will be less
then if the dtmf digits are sent within iax packets (Type: dtmf). If they
are arriving via inband audio, that's likely your problem as any missed
We are developing an IVR application and when I am testing locally on
my machine using a softphone (iaxcomm) the digits I press for GET DATA
work every time. I am testing with a local extension that goes right
into my routine. However when I try to call in to the system using an
analog or cell
15 matches
Mail list logo