Hello,
I have put dozens of these in production at client sites. Here is the
perl script I use to auto-config them. I have also seen images that
you can tftp to them in the past, but I can't seem to find them
through google at the moment.
This may be a long shot, but I suppose it can't hurt to ask!
I have seen chatter regarding Zhone channel banks amongst the asterisk users
primarily. In all of my searching I am guessing that the majority of people
using the Zhone's are probably reading this, and with the support that I have
Hi Michael,
You might want to check the voltage settings on the FXS side of
things. Also, are you using the correct signalling? (ground start,
loop start, etc.)
In the Zplex users guide, on page 41 you will see 2 sections on TTLP
and RTLP. That might be of some help to you.
Hey... You have caller
] Zhone channel bank issues
Hi Michael,
You might want to check the voltage settings on the FXS side of
things. Also, are you using the correct signalling? (ground start,
loop start, etc.)
In the Zplex users guide, on page 41 you will see 2 sections on TTLP
and RTLP. That might be of some help
On Mon, 10 Jan 2005 12:51:49 -0500, Michael Lyszczek
[EMAIL PROTECTED] wrote:
Anyone have any issues like thisI am fwding broadvoice to zaptel,1
with my t100p and the t1 goes to a zhone zplex10b.. I can ring
extension 1, which is pair 1 of the channel bank, but it doesnt
recognize offhook
] Zhone Channel Bank
It is a T1 cross-over from Black Box.
[EMAIL PROTECTED], Asterisk Users Mailing List - Non-Commercial
Discussion asterisk-users@lists.digium.com wrote:
Just out of curiosity, is that a network cross-over cable or a T-1
cross-over cable? For the pinout for a T-1 cross
Has anyone successfully connected a Digium T100P to a Zhone Z-Plex 10 24
S/O? I have been unsuccessful in getting the T1 to sync up. I have
searched the documentation and concluded that a cross-over cable and
ESF/B8ZF configuration on both hardware should have cleared alarms but that
does
Just out of curiosity, is that a network cross-over cable or a T-1
cross-over cable? For the pinout for a T-1 cross-over cable see
http://www.voip-info.org/wiki-crossover+T1+cable
On Tue, 2004-12-21 at 01:49 -0800, Jonathan Augenstine wrote:
Has anyone successfully connected a Digium T100P to
It is a T1 cross-over from Black Box.
[EMAIL PROTECTED], Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com wrote:
Just out of curiosity, is that a network cross-over cable or a T-1
cross-over cable? For the pinout for a T-1 cross-over cable see
