Hi,
Am Donnerstag, den 23.05.2013, 20:48 +0200 schrieb Maximilian Grobecker:
Am 22.05.2013 16:39, schrieb Andrew Colin:
Hi guys,
Any idea why I am getting this error when someone tries to send me a T38
Fax?
Hi,
Maybe you have not allowed T.38 as acceptable codec ;-)
You can try
Hi,
Maybe you have not allowed T.38 as acceptable codec ;-)
You can try with allow=all in your sip.conf.
Am 22.05.2013 16:39, schrieb Andrew Colin:
Hi guys,
Any idea why I am getting this error when someone tries to send me a T38
Fax?
--
488 not acceptable is due to codec error. Make sure you have right codec in
place between the end points.
On Fri, May 24, 2013 at 12:18 AM, Maximilian Grobecker
m.grobec...@portunity.de wrote:
Hi,
Maybe you have not allowed T.38 as acceptable codec ;-)
You can try with allow=all in your
Hi guys,
Any idea why I am getting this error when someone tries to send me a T38
Fax?
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every
Hello,
Can anybody help me with this issue?
-- Called 999302
-- Got SIP response 488 Not
Acceptable Here back from 202.125.154.12
== No one is available to answer at this time
Why am I getting error 488. Im using Sipura SPA-2000
Thanks
David
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Enable debugging to see the reason:
CLI sip debug
quote
A UAS rejecting an offer contained in an INVITE SHOULD return a 488 (Not
Acceptable Here) response. Such a response SHOULD include a Warning
header field value explaining why the offer was
Hello,
Can anybody help me with this issue?
-- Called 999302
-- Got SIP response 488 Not
Acceptable Here back from 202.125.154.12
== No one is available to answer at this time
Why am I getting error 488. Im using Sipura SPA-2000
Thanks
David
David wrote:
Hello,
Can anybody help me with this issue?
-- Called 999302
-- Got SIP response 488 Not Acceptable Here back from
202.125.154.12 == No one is available to answer at this time
Check codecs on both sides
___
I have a setup of 3 Cisco 7940 running Sip image 6.3. All these phone
are registered by the below information
*CLI sip show peers
Name/usernameHost Mask Port Status
2002/2002192.168.22.199 (D) 255.255.255.255 5060 Unmonitored
2001/2001
Take out the allow=all in your sip.conf and put in allow= for the codec
you want to use and disallow=all.
On Wed, 2004-04-07 at 15:18, Roger wrote:
I have a setup of 3 Cisco 7940 running Sip image 6.3. All these phone
are registered by the below information
*CLI sip show peers
Eric Wieling wrote:
Take out the allow=all in your sip.conf and put in allow= for the codec
you want to use and disallow=all.
Holy crap it worked!
sip.conf
disallow=all ; disallow all codecs
allow=ulaw ; Allow all codecs
allow=alaw ; Allow all codecs
11 matches
Mail list logo