On Wed, Jul 9, 2014 at 3:55 PM, Massimo Nuvoli mass...@archivio.it wrote:
I found a very strange proble whit two asterisk servers in the same network.
Scenario
Asterisk A with extensions 5XX
Asterisk B with extensions 2XX
There is NO link between the two asterisks.
Call from 501 to 503,
Il 11/07/2014 16:45, Rusty Newton ha scritto:
On Wed, Jul 9, 2014 at 3:55 PM, Massimo Nuvoli mass...@archivio.it wrote:
I found a very strange proble whit two asterisk servers in the same network.
Scenario
Asterisk A with extensions 5XX
Asterisk B with extensions 2XX
There is NO link between
I found a very strange proble whit two asterisk servers in the same network.
Scenario
Asterisk A with extensions 5XX
Asterisk B with extensions 2XX
There is NO link between the two asterisks.
Call from 501 to 503, 503 ringing
Call from 201 to 203, 203 ringing
The 202 extension comand a
Hi all,
I can´t pickup calls on my asterisk. When I try to load app_pickupchan.so I
receive following message:
Module 'app_pickupchan.so' was not compiled with the same compile-time options
as this version of Asterisk
It was working fine until few time ago.
What is going on?
Thanks!
Att,
Hi!
Fabio == Fabio [EMAIL PROTECTED] writes:
Fabio are you using canreinvite=yes on your SIP endpoints definition
Fabio ?
No, I'm using canreinvite=no.
Fabio also check your features.conf, do you have pickupexten = *8 ?
Yes it is:
canopus*CLI show features
Builtin Feature
Hi!
Could somebody help me with pickup feature? I've set
callgroup = 1
pickupgroup = 1
for my phones in sip.conf, but if I try to pickup call with *8
asterisk output to console
Jun 6 15:04:44 WARNING[11857]: pbx.c:2401 __ast_pbx_run: Invalid extension
'*', but no rule 'i' in context
:42 a.m.
Para: asterisk-users@lists.digium.com
Asunto: [Asterisk-Users] pickup problem
Hi!
Could somebody help me with pickup feature? I've set
callgroup = 1
pickupgroup = 1
for my phones in sip.conf, but if I try to pickup call with *8
asterisk output to console
Jun 6 15:04:44 WARNING
Hi,I have the folowing setup:[incoming]exten = s,1,Wait(3)exten = s,2,Answerexten = s,3,Background(welcome)exten = 1,1,Noop(call for operators)exten = 1,2,Dial(SIP/10SIP/11|60|tr)
exten = 1,3,Hungup;this is for pulse phones exten = t,1,NoOp(.call for .60)exten = t,2,Dial(SIP/10,60,mtr)exten =
Bogdan Tocu wrote:
Hi,
I have the folowing setup:
[incoming]
exten = s,1,Wait(3)
exten = s,2,Answer
exten = s,3,Background(welcome)
exten = 1,1,Noop(call for operators)
exten = 1,2,Dial(SIP/10SIP/11|60|tr)
exten = 1,3,Hungup
;this is for pulse phones
exten = t,1,NoOp(.call for .60)
exten =
Thank you, you are perfectly right..:) It's logic, but, didn't cross my mind.. On 5/31/06, Joshua Colp [EMAIL PROTECTED]
wrote:Bogdan Tocu wrote: Hi, I have the folowing setup:
[incoming] exten = s,1,Wait(3) exten = s,2,Answer exten = s,3,Background(welcome) exten = 1,1,Noop(call for operators)
[EMAIL PROTECTED]
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
asterisk-users@lists.digium.com; [EMAIL PROTECTED]
Sent: Monday, March 20, 2006 1:17 PM
Subject: RE: [Asterisk-Users] pickup problem
PickUp2:
http://linux.thorsten-knabe.de/asterisk/pickup.jsp
works very well.
Mimmus
Hello,I can pickup a call from a specific number:exten = _8XXX, 1, Pickup(${EXTEN:1})But i couldnt pickup calls coming from PSTN to local extensions.Another question is it possible to pickup the last calling number without any exten.Can you help me?erkaN
Yahoo! Mail
Use Photomail to share
erkan kolemen wrote:
Hello,
I can pickup a call from a specific number:
exten = _8XXX, 1, Pickup(${EXTEN:1})
But i couldnt pickup calls coming from PSTN to local extensions.
I'm using a dialplan entry like yours:
exten = _*9,1,Pickup(${EXTEN:2})
and just tested it. Working fine using
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Rich Adamson
Sent: Monday, March 20, 2006 4:06 PM
there is also a more generic call pickup
using 'callgroup=2' and 'pickupgroup=2' in your sip
definitions. That approach uses *8 or *8# to pickup
Mimmus wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Rich Adamson
Sent: Monday, March 20, 2006 4:06 PM
there is also a more generic call pickup
using 'callgroup=2' and 'pickupgroup=2' in your sip
definitions. That approach uses *8 or *8#
On 20 Mar 2006, at 15:39, Rich Adamson wrote:
Mimmus wrote:
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-
[EMAIL PROTECTED] On Behalf Of Rich Adamson
Sent: Monday, March 20, 2006 4:06 PM
there is also a more generic call pickup using 'callgroup=2' and
-Commercial Discussion
Subject: Re: [Asterisk-Users] pickup problem
On 20 Mar 2006, at 15:39, Rich Adamson wrote:
Mimmus wrote:
-Original Message-
From: [EMAIL PROTECTED] [mailto:asterisk-
[EMAIL PROTECTED] On Behalf Of Rich Adamson
Sent: Monday, March 20, 2006 4:06 PM
List - Non-Commercial Discussion
Oggetto: [Asterisk-Users] pickup problem on Asterisk 1.2.4
Solved the problem downgrading zaptel 1.2.4 to 1.2.3.
Mantaining the same configurations now everything works fine.
Regards,
_fangi_
___
--Bandwidth
Users Mailing List - Non-Commercial Discussion
Oggetto: [Asterisk-Users] pickup problem on Asterisk 1.2.4
Hi everybody,
I'm facing a strange problem after upgrading Asterisk from 1.0.9 to
1.2.4.
Sometimes, when receiving an incoming call from pstn, although my sip
phones ring correctly (I've got both
Hi everybody,
I'm facing a strange problem after upgrading Asterisk from 1.0.9 to
1.2.4.
Sometimes, when receiving an incoming call from pstn, although my sip
phones ring correctly (I've got both softphones and hardware phones),
noone can pick up the call. Asterisk CLI shows me that the phones are
Hi,
when i use the *8 for the call pickup the call i fetch is directly
connected and i can't see the callers number.
What i want is that the call in the first rings at my phone and in the
second i can see the callers number.
I am using a polycom 500 ip phone. Is this a special polycom
21 matches
Mail list logo
