Hi,
We're having problems dialing out to Asterisk from
our Grandstream GXP-200 phones. About 2 of 3 times, when we dial, nothing
happens. Looking at the console in max debug mode, there are no messages
except the following:
Feb 24 10:29:20 WARNING[2475]: chan_sip.c:1208
retrans_pkt:
Hello Guys,
I am trying to make Asterisk do dial-out calls.
It doesn't even do test calls. It never calls. I
tested everything and i am clueless. However i can
call Asterisk and it picks up the phone and executes
the dial-plan. However, my dial-plan is supposed to
do
outbound calls.
Zap
Why are you putting the outgoing called into the s logic?
Try something like exten=_XXX,1,Dial(Zap/g1/1514${EXTEN})
Mark
M Sharif wrote:
Hello Guys,
I am trying to make Asterisk do dial-out calls.
It doesn't even do test calls. It never calls. I
tested everything and i am clueless.
i tried to write a pattern to usa destination and that
was 1* it worked well but when i tried to specify the
number of digits i wrote 1NXXNXX it didnt work.
so what i must to write in case to specify the number
of digits of the destination.
__
when i tried to specify the
number of digits i wrote 1NXXNXX it didnt work.
You may have some similar pattern in the dialplan that interferes.
What happens exactly on the CLI output when you try
exten = 1, _1NXXNXX,Dial(whatever)
___
